Download or read book Handbook of Organic Food Safety and Quality written by J Cooper and published by Elsevier. This book was released on 2007-07-26 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to increasing consumer demand for safe, high quality, ethical foods, the production and consumption of organic food and produce has increased rapidly over the past two decades. In recent years the safety and quality of organic foods has been questioned. If consumer confidence and demand in the industry is to remain high, the safety, quality and health benefits of organic foods must be assured. With its distinguished editor and team of top international contributors, Handbook of organic food safety and quality provides a comprehensive review of the latest research in the area.Part one provides an introduction to basic quality and safety with chapters on factors affecting the nutritional quality of foods, quality assurance and consumer expectations. Part two discusses the primary quality and safety issues related to the production of organic livestock foods including the effects of feeding regimes and husbandry on dairy products, poultry and pork. Further chapters discuss methods to control and reduce infections and parasites in livestock. Part three covers the main quality and safety issues concerning the production of organic crop foods, such as agronomic methods used in crop production and their effects on nutritional and sensory quality, as well as their potential health impacts. The final part of the book focuses on assuring quality and safety throughout the food chain. Chapters focus on post-harvest strategies to reduce contamination of food and produce, and ethical issues such as fair trade products. The final chapters conclude by reviewing quality assurance strategies relating to specific organic food sectors.The Handbook of organic food quality and safety is a standard reference for professionals and producers within the industry concerned with improving and assuring the quality and safety of organic foods. - Improve the safety, quality and health benefits of organic foods - Discusses the latest research findings in this area - Focuses on assuring quality and safety throughout the food chain

Download or read book Listing of Codes of Practice Applicable to Foods written by and published by . This book was released on 1993 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Organically Produced Foods written by Joint FAO/WHO Codex Alimentarius Commission and published by Food & Agriculture Org.. This book was released on 2007 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Codex Alimentarius (Latin, meaning Food Law or Code) is a collection of internationally adopted food standards. Food labeling is the primary means of communication between the producer and seller of food on one hand, and the purchaser and consumer of the other. These guidelines have been prepared for the purpose of providing an agreed approach to the requirements which underpin production of, and the labeling and claims for, organically produced foods.

Download or read book Food and Drink Good Manufacturing Practice written by Institute of Food Science and Technology and published by John Wiley & Sons. This book was released on 2012-11-26 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good Manufacturing Practice (GMP) refers to advice and guidance put in place to outline the aspects of production and testing that can impact the quality and safety of a product. In the case of food and drink, GMP is aimed at ensuring that products are safe for the consumer and are consistently manufactured to a quality appropriate to their intended use. Manufacturers have for several years been driving towards such goals as Total Quality Management (TQM), lean manufacturing and sustainability – GMP is bound up with these issues. The ever-increasing interest amongst consumers, retailers and enforcement authorities in the conditions and practices in food manufacture and distribution, increases the need for the food manufacturer to operate within clearly defined policies such as those laid down in GMP. The ability to demonstrate that Good Manufacturing Practice has been fully and effectively implemented could, in the event of a consumer complaint or a legal action, reduce the manufacturer’s liability and protect them from prosecution. First launched in 1986, IFST’s Good Manufacturing Practice Guide has been widely recognized as an indispensable reference work for food scientists and technologists. It sets out to ensure that food manufacturing processes deliver products that are uniform in quality, free from defects and contamination, and as safe as it is humanly possible to make them. This 6th edition has been completely revised and updated to include all the latest standards and guidance, especially with regard to legislation-driven areas such as HACCP. The Guide is a must have for anyone in a managerial or technical capacity concerned with the manufacture, storage and distribution of food and drink. It is also a valuable reference for food education, training and for those involved in food safety and enforcement. Food scientists in academic and industry environments will value its precision, and policy makers and regulatory organizations will find it an indispensable guide to an important and multifaceted area. About IFST IFST is the leading independent qualifying body for food professionals in Europe and the only professional body in the UK concerned with all aspects of food science and technology. IFST members are drawn from all over the world and from all ages and backgrounds, including industry (manufacturing, retailing and food service), universities and schools, government, research and development, quality assurance and food law enforcement. IFST qualifications are internationally recognised as a sign of proficiency and integrity.

Download or read book Code of Practice for Organic Food Processing written by Alexander Beck and published by . This book was released on 2006 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crop Post Harvest Science and Technology Volume 1 written by Peter Golob and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-wide losses of crops, post-harvest, through microbial action,pests, diseases and other types of spoilage amount to millions oftons every year. This essential handbook is the first in athree-volume series which covers all factors affecting post-harvestquality of all major fruits, vegetables, cereals and other crops.Compiled by members of the world-renowned Natural ResourcesInstitute at the University of Greenwich, Chatham, UK, thecomprehensive contents of this landmark publication encourageinteractions between each sector of the agricultural community inorder to improve food security, food safety and food quality intoday’s global atmosphere. Through the carefully compiled and edited chapters,internationally respected authors discuss ways to improve harvestyield and quality, drawing on their many years’ practicalexperience and the latest research findings, applications andmethodologies. Subjects covered include: an introduction to thesystems used in post-harvest agricultural processes, physical andbiological factors affecting post-harvest commodities, storageissues, pest management, food processing and preservation, foodsystems, the latest research and assimilation of this work, andcurrent trade and international agreements. An invaluable glossaryshowing important pests, pathogens and plants is alsoincluded. Crop Post-Harvest: Science and Technology Volume 1: Principlesand Practice is a must-have reference book which offers the readeran overview of the globalisation of post-harvest science,technology, economics, and the development of the storage andhandling of perishable and durable products. Volumes 2 and 3 willgo on to explore durables and perishables individually in moredetail, with many case studies taken from around the globe. This 3-volume work is the standard handbook and reference forall professionals involved in the harvesting, shipping, storage andprocessing of crops, including agricultural and plant scientists,food scientists and technologists, microbiologists, plantpathologists, entomologists and all post harvest, shipping andstorage consultants. Libraries in all universities and researchestablishments where these subjects are studied and taught shouldhave multiple copies on their shelves

Download or read book Handbook of Hygiene Control in the Food Industry written by John Holah and published by Woodhead Publishing. This book was released on 2016-06-10 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Hygiene Control in the Food Industry, Second Edition, continues to be an authoritative reference for anyone who needs hands-on practical information to improve best practices in food safety and quality. The book is written by leaders in the field who understand the complex issues of control surrounding food industry design, operations, and processes, contamination management methods, route analysis processing, allergenic residues, pest management, and more. Professionals and students will find a comprehensive account of risk analysis and management solutions they can use to minimize risks and hazards plus tactics and best practices for creating a safe food supply, farm to fork. - Presents the latest research and development in the field of hygiene, offering a broad range of the microbiological risks associated with food processing - Provides practical hygiene related solutions in food facilities to minimize foodborne pathogens and decrease the occurrence of foodborne disease - Includes the latest information on biofilm formation and detection for prevention and control of pathogens as well as pathogen resistance

Download or read book Advances in Meat Processing Technology written by Alaa El-Din A. Bekhit and published by CRC Press. This book was released on 2017-09-29 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meat is a unique biological material with a central importance in nutrition and health. Advances in Meat Processing Technology merges the expertise of meat scientists and food engineers in a holistic approach toward the processing of meat. The meat industry strives to deliver consistent high quality and safe meat products. Readers can benefit from knowledge generated by meat science researchers by achieving a greater understanding of the nature of meat, and the engineering technology required for meat processing. This book comprises 17 full chapters that provide up-to-date and fundamental information on current topics in meat processing. This inculdes novel technologies, such as the application of pulsed electric field, meat stretching and shaping, ultrasound and high pressure. In addition, analytical techniques such as Raman spectroscopy and NMR are enabling considerable advancement of knowledge in meat science and in meat processing. Written by world renowned experts in their fields, this contemporary collective work assembles the state of current knowledge that is of importance to both industry and academia.

Download or read book The Fundamentals of Horticulture written by Chris Bird and published by Cambridge University Press. This book was released on 2014-04-24 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for all those interested in horticulture, from students to keen gardeners. Focuses on practical applications, and supports RHS specifications.

Download or read book Encyclopedia of Food Safety written by and published by Academic Press. This book was released on 2013-12-12 with total page 2356 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the world’s growing population, the provision of a safe, nutritious and wholesome food supply for all has become a major challenge. To achieve this, effective risk management based on sound science and unbiased information is required by all stakeholders, including the food industry, governments and consumers themselves. In addition, the globalization of the food supply requires the harmonization of policies and standards based on a common understanding of food safety among authorities in countries around the world. With some 280 chapters, the Encyclopedia of Food Safety provides unbiased and concise overviews which form in total a comprehensive coverage of a broad range of food safety topics, which may be grouped under the following general categories: History and basic sciences that support food safety; Foodborne diseases, including surveillance and investigation; Foodborne hazards, including microbiological and chemical agents; Substances added to food, both directly and indirectly; Food technologies, including the latest developments; Food commodities, including their potential hazards and controls; Food safety management systems, including their elements and the roles of stakeholders. The Encyclopedia provides a platform for experts from the field of food safety and related fields, such as nutrition, food science and technology and environment to share and learn from state-of-the art expertise with the rest of the food safety community. Assembled with the objective of facilitating the work of those working in the field of food safety and related fields, such as nutrition, food science and technology and environment - this work covers the entire spectrum of food safety topics into one comprehensive reference work The Editors have made every effort to ensure that this work meets strict quality and pedagogical thresholds such as: contributions by the foremost authorities in their fields; unbiased and concise overviews on a multitude of food safety subjects; references for further information, and specialized and general definitions for food safety terminology In maintaining confidence in the safety of the food supply, sound scientific information is key to effectively and efficiently assessing, managing and communicating on food safety risks. Yet, professionals and other specialists working in this multidisciplinary field are finding it increasingly difficult to keep up with developments outside their immediate areas of expertise. This single source of concise, reliable and authoritative information on food safety has, more than ever, become a necessity

Download or read book Quality Management Systems for the Food Industry A Guide to ISO 9001 2 written by A. Bolton and published by Springer Science & Business Media. This book was released on 1997-07-31 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ISO 9001/2 series of standards for Quality Management Systems is of increasing importance to the food and drink industry; it functions as an outward and visible sign to customers that the industry has a defined quality management system that has been independently appraised and is regularly audited. ISO 9001/2 certification can enable a company, to reduce the audit burden from a multitude of customers and can also help the manufacturer or distributor involved in auditing its own suppliers. Above all, it may improve the effectiveness of its own operation and profits. Quality Management Systems for the Food Industry describes what the standards are, what they mean and how to achieve them, and identifies both the potential benefits and limitations. It discusses choice of assessment house, whether to use consultants or not, and particularly points out the detail that assessors will be looking for. Guidance is given on the basic format for a suitable quality management system.

Download or read book Handbook of Hygiene Control in the Food Industry written by H. L. M. Lelieveld and published by Taylor & Francis US. This book was released on 2005-10-30 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complementing the highly successful Hygiene in food processing, this book reviews recent research on improving hygiene in food processing. Part 1 considers recent research on contamination risks such as biofilms and how they can be assessed. Part 2 reviews ways of improving hygienic design of both buildings and equipment, including clean room technology. The final part of the book discusses ways of improving hygiene practice and management.

Download or read book Hygiene in Food Processing written by H.L.M. Lelieveld and published by Elsevier. This book was released on 2014-02-14 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hygienic processing of food concerns both potential hazards in food products and the regulation, design, and management of food processing facilities. This second edition of Hygiene in Food Processing gives a revised overview of the practices for safe processing and incorporates additional chapters concerning pest control, microbiological environmental sampling, and the economics of food plants. Part one addresses microbial risks in foods and the corresponding regulation in the European Union. Part two discusses the hygienic design of food factory infrastructure, encompassing the design and materials for the factory itself, as well as food processing equipment. This edition includes a new chapter on the control of compressed gases used to pneumatically operate equipment. Part three focuses on cleaning and disinfection practices in food processing. The chapter on cleaning in place also considers more cost-effective systems, and complements the additional chapter on maintenance of equipment. These chapters also explore issues such as the hygiene of workers, potential infection by foreign bodies, and pest control. Further, the chapter on microbiological sampling explains how to calculate the risk of contamination depending on the product's environment. This essential second edition is useful to professionals responsible for hygiene in the food industry. It provides a comprehensive, yet concise and practical reference source for food plant managers, suppliers of food processing equipment, building contractors, and food inspectors looking for an authoritative introduction to hygiene regulation, hygienic design, and sanitation. - Provides a revised overview of the practices for safe processing - Incorporates additional chapters concerning pest control, microbiological environmental sampling, and the economics of food plants - This essential second edition is useful for professionals responsible for hygiene in the food industry

Download or read book Environmental and Social Standards Certification and Labelling for Cash Crops written by Cora Dankers and published by Food & Agriculture Org.. This book was released on 2003 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workplace safety and environmental sustainability can be promoted by agreed standards, certification and labelling. This publication contains 22 case studies on the impact of standards and certification programmes for cash crops in developing countries, including organic agriculture, fair-trade labelling, "Social Accountability 8000", the Rainforest Alliance Sustainable Agriculture Programme, the Ethical Trading Initiative, ISO-14001 and EurepGap. It examines the origins, scope and certification systems of these initiatives, as well as stakeholder involvement, the standard-setting process, verification methods, the relationship with the World Trade Organization agreements and the potential role of governments.

Download or read book Product Certification and Ecolabelling for Fisheries Sustainability written by Cathy A. Roheim and published by Food & Agriculture Org.. This book was released on 2001 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document considers product certification and ecolabelling schemes used for fish and fishery products. It discusses the characteristics and theoretical foundations of these programmes, the links to international trade law; and other institutional aspects.

Download or read book Handbook of Fruits and Fruit Processing written by Nirmal K. Sinha and published by John Wiley & Sons. This book was released on 2012-06-20 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: HANDBOOK OF FRUITS AND FRUIT PROCESSING SECOND EDITION Fruits are botanically diverse, perishable, seasonal, and predominantly regional in production. They come in many varieties, shapes, sizes, colors, flavors, and textures and are an important part of a healthy diet and the global economy. Besides vitamins, minerals, fibers, and other nutrients, fruits contain phenolic compounds that have pharmacological potential. Consumed as a part of a regular diet, these naturally occurring plant constituents are believed to provide a wide range of physiological benefits through their antioxidant, anti-allergic, anti-carcinogenic, and anti-inflammatory properties. Handbook of Fruits and Fruit Processing distils the latest developments and research efforts in this field that are aimed at improving production methods, post-harvest storage and processing, safety, quality, and developing new processes and products. This revised and updated second edition expands and improves upon the coverage of the original book. Some highlights include chapters on the physiology and classification of fruits, horticultural biochemistry, microbiology and food safety (including HACCP, safety and the regulation of fruits in the global market), sensory and flavor characteristics, nutrition, naturally present bioactive phenolics, postharvest physiology, storage, transportation, and packaging, processing, and preservation technologies. Information on the major fruits includes tropical and super fruits, frozen fruits, canned fruit, jelly, jam and preserves, fruit juices, dried fruits, and wines. The 35 chapters are organized into five parts: Part I: Fruit physiology, biochemistry, microbiology, nutrition, and health Part II: Postharvest handling and preservation of fruits Part III: Product manufacturing and packaging Part IV: Processing plant, waste management, safety, and regulations Part V: Production, quality, and processing aspects of major fruits and fruit products Every chapter has been contributed by professionals from around the globe representing academia, government institutions, and industry. The book is designed to be a valuable source and reference for scientists, product developers, students, and all professionals with an interest in this field.

Download or read book Environmentalism written by Kay Milton and published by Routledge. This book was released on 2003-12-16 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Located in a wide spectrum of current research and practice, from analyses of green ideology and imagery, enviromental law and policy, and local enviromental activism in the West to ethnographic studies of relationships between humans and their enviroments in hunter/gatherer societies, Enviromentalism: The View from Anthropology offers an original perspective on what is probably the best-known issue of the late twentieth century. It will be particularly useful to all social scientists interested in environmentalism and human ecology, to environmental policy-makers and to undergraduates, lecturers and researchers in social anthropology, development studies and sociology.