Download or read book Code Generation and Model Driven Development for Constrained Embedded Software written by Andrzej Wąsowski and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model driven development methodology for hybrid embedded systems based on UML with emphasis on safety related requirements written by Daw Pérez, Zamira Angélica and published by kassel university press GmbH. This book was released on 2014-01-01 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Entwicklung eingebetteter Systeme wird aufgrund der immer anspruchsvolleren Anwendungen sowie der Verwendung von leistungsfähigeren Hardware-Architekturen (z.B. Multicore-, Hybrid-Systeme) immer komplexer. Modellgetriebene Methoden reduzieren die Komplexität des Systems mittels angemessenen Abstraktionsniveaus. Diese Arbeit stellt die modellgetriebene Entwicklungsmethodik DMOSES (Determi-nistische Modelle für die signalverarbeitenden eingebetteten Systeme) vor. Diese Methodik strebt die Verbesserung der Entwicklung hybrider eingebetteten Systeme (z.B. CPUs und FPGAs) hinsichtlich der Komplexität mittels anpassbarer Abstraktionseben, automatischer Codegenerierung und Systemverifikation an. Systeme werden mittels UML-Verhaltensmodelle spezifiziert, deren erweiterte Semantik relevante funktionale und nicht-funktionale Aspekte hybrider eingebetteten Systemen beschreibt. Eine anpassbare Abstraktionsebene wird durch die Integration von automatischer Code-Generierung und optimierbarem Code erreicht. Außerdem werden Sicherheitsanforderungen durch die Integration von Analysetechniken (Formale Verifikation, Ausführungszeit-Analyse und Software-Verträgen) in die Entwicklungsmethodik verifiziert.
Download or read book Model Driven Development for Embedded Software written by Jean-Aime Maxa and published by Elsevier. This book was released on 2018-03-27 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-driven Development for Embedded Software: Application to Communications for Drone Swarm describes the principles of model-oriented design used in the aeronautical field, specifically for the UAV (Unmanned Aerial Vehicle). The book focuses on designing an embedded system for drones to carry out ad hoc communication within a drone fleet. In this context, an original methodology for rapid prototyping of embedded systems is presented. This approach saves time for the verification and formal validation phases, contributing to certification of the Unmanned Aerial System (UAS). The book also addresses the more traditional verification phases that must be performed to verify accuracy of the system. This evaluation is carried out in simulation and by real experimentation. The various tools necessary for the implementation of this methodology are described to allow the reader to be able to implement independently. Finally, to illustrate the contribution of this original methodology, an example of embedded system development is presented in which the different phases of the methodology are explained to conceive, validate and test a new secure routing protocol developed for communications within a fleet of drones. Describes the principles of model-oriented design used in the aeronautical field Presents an original methodology of rapid prototyping of embedded systems Presents a mode of development for embedded systems in the different phases
Download or read book Embedded Systems Development written by Alberto Sangiovanni-Vincentelli and published by Springer Science & Business Media. This book was released on 2013-07-19 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers readers broad coverage of techniques to model, verify and validate the behavior and performance of complex distributed embedded systems. The authors attempt to bridge the gap between the three disciplines of model-based design, real-time analysis and model-driven development, for a better understanding of the ways in which new development flows can be constructed, going from system-level modeling to the correct and predictable generation of a distributed implementation, leveraging current and future research results.
Download or read book Component Based Software Development for Embedded Systems written by Colin Atkinson and published by Springer. This book was released on 2005-11-19 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are ubiquitous. They appear in cell phones, microwave ovens, refrigerators, consumer electronics, cars, and jets. Some of these embedded s- tems are safety- or security-critical such as in medical equipment, nuclear plants, and X-by-wire control systems in naval, ground and aerospace transportation - hicles. With the continuing shift from hardware to software, embedded systems are increasingly dominated by embedded software. Embedded software is complex. Its engineering inherently involves a mul- disciplinary interplay with the physics of the embedding system or environment. Embedded software also comes in ever larger quantity and diversity. The next generation of premium automobiles will carry around one gigabyte of binary code. The proposed US DDX submarine is e?ectively a ?oating embedded so- ware system, comprising 30 billion lines of code written in over 100 programming languages. Embedded software is expensive. Cost estimates are quoted at around US$15– 30 per line (from commencement to shipping). In the defense realm, costs can range up to $100, while for highly critical applications, such as the Space Shuttle, the cost per line approximates $1,000. In view of the exponential increase in complexity, the projected costs of future embedded software are staggering.
Download or read book Model Driven Software Development written by Sami Beydeda and published by Springer Science & Business Media. This book was released on 2005-11-11 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstraction is the most basic principle of software engineering. Abstractions are provided by models. Modeling and model transformation constitute the core of model-driven development. Models can be refined and finally be transformed into a technical implementation, i.e., a software system. The aim of this book is to give an overview of the state of the art in model-driven software development. Achievements are considered from a conceptual point of view in the first part, while the second part describes technical advances and infrastructures. Finally, the third part summarizes experiences gained in actual projects employing model-driven development. Beydeda, Book and Gruhn put together the results from leading researchers in this area, both from industry and academia. The result is a collection of papers which gives both researchers and graduate students a comprehensive overview of current research issues and industrial forefront practice, as promoted by OMG’s MDA initiative.
Download or read book Model Driven Engineering and Software Development written by Luís Ferreira Pires and published by Springer. This book was released on 2018-07-07 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes thoroughly revised and selected papers from the 5th International Conference on Model-Driven Engineering and Software Development, MODELSWARD 2017, held in Porto, Portugal, in February 2017. The 20 thoroughly revised and extended papers presented in this volume were carefully reviewed and selected from 91 submissions. They contribute to the development of highly relevant research trends in model-driven engineering and software development such as methodologies for MDD development and exploitation, model-based testing, model simulation, domain-specific modeling, code generation from models, new MDD tools, multi-model management, model evolution, and industrial applications of model-based methods and technologies.
Download or read book Model Driven Software Development written by Markus Völter and published by John Wiley & Sons. This book was released on 2013-06-26 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Driven Software Development (MDSD) is currently a highly regarded development paradigm among developers and researchers. With the advent of OMG's MDA and Microsoft's Software Factories, the MDSD approach has moved to the centre of the programmer's attention, becoming the focus of conferences such as OOPSLA, JAOO and OOP. MDSD is about using domain-specific languages to create models that express application structure or behaviour in an efficient and domain-specific way. These models are subsequently transformed into executable code by a sequence of model transformations. This practical guide for software architects and developers is peppered with practical examples and extensive case studies. International experts deliver: * A comprehensive overview of MDSD and how it relates to industry standards such as MDA and Software Factories. * Technical details on meta modeling, DSL construction, model-to-model and model-to-code transformations, and software architecture. * Invaluable insight into the software development process, plus engineering issues such as versioning, testing and product line engineering. * Essential management knowledge covering economic and organizational topics, from a global perspective. Get started and benefit from some practical support along the way!
Download or read book Component Based Software Development for Embedded Systems written by Colin Atkinson and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a good opportunity for software engineering practitioners and researchers to get in sync with the current state-of-the-art and future trends in component-based embedded software research. The book is based on a selective compilation of papers that cover the complete component-based embedded software spectrum, ranging from methodology to tools. Methodology aspects covered by the book include functional and non-functional specification, validation, verification, and component architecture. As tools are a critical success factor in the transfer from academia-generated knowledge to industry-ready technology, an important part of the book is devoted to tools. This state-of-the-art survey contains 16 carefully selected papers organised in topical sections on specification and verification, component compatibility, component architectures, implementation and tool support, as well as non-functional properties.
Download or read book Domain Specific Modeling written by Steven Kelly and published by John Wiley & Sons. This book was released on 2008-04-11 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "[The authors] are pioneers. . . . Few in our industry have their breadth of knowledge and experience." —From the Foreword by Dave Thomas, Bedarra Labs Domain-Specific Modeling (DSM) is the latest approach to software development, promising to greatly increase the speed and ease of software creation. Early adopters of DSM have been enjoying productivity increases of 500–1000% in production for over a decade. This book introduces DSM and offers examples from various fields to illustrate to experienced developers how DSM can improve software development in their teams. Two authorities in the field explain what DSM is, why it works, and how to successfully create and use a DSM solution to improve productivity and quality. Divided into four parts, the book covers: background and motivation; fundamentals; in-depth examples; and creating DSM solutions. There is an emphasis throughout the book on practical guidelines for implementing DSM, including how to identify the necessary language constructs, how to generate full code from models, and how to provide tool support for a new DSM language. The example cases described in the book are available the book's Website, www.dsmbook.com, along with, an evaluation copy of the MetaEdit+ tool (for Windows, Mac OS X, and Linux), which allows readers to examine and try out the modeling languages and code generators. Domain-Specific Modeling is an essential reference for lead developers, software engineers, architects, methodologists, and technical managers who want to learn how to create a DSM solution and successfully put it into practice.
Download or read book Model Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
Download or read book Model driven Development Methodology for Hybrid Embedded Systems Based on UML with Emphasis on Safety related Requirements written by Zamira Angélica Daw Pérez and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Driven Engineering Languages and Systems written by Robert B. France and published by Springer. This book was released on 2012-09-19 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Conference on Model Driven Engineering Languages and Systems, MODELS 2012, held in Innsbruck, Austria, in September/October 2012. The 50 papers presented in this volume were carefully reviewed and selected from a total of 181 submissions. They are organized in topical sections named: metamodels and domain specific modeling; models at runtime; model management; modeling methods and tools, consistency analysis, software product lines; foundations of modeling; static analysis techniques; model testing and simulation; model transformation; model matching, tracing and synchronization; modeling practices and experience; and model analysis.
Download or read book Code Generation for Embedded Processors written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics is driven by the explosive growth of digital communications and multi-media technology. A basic challenge is to design first-time-right complex digital systems, that meet stringent constraints on performance and power dissipation. In order to combine this growing system complexity with an increasingly short time-to-market, new system design technologies are emerging based on the paradigm of embedded programmable processors. This concept introduces modularity, flexibility and re-use in the electronic system design process. However, its success will critically depend on the availability of efficient and reliable CAD tools to design, programme and verify the functionality of embedded processors. Recently, new research efforts emerged on the edge between software compilation and hardware synthesis, to develop high-quality code generation tools for embedded processors. Code Generation for Embedded Systems provides a survey of these new developments. Although not limited to these targets, the main emphasis is on code generation for modern DSP processors. Important themes covered by the book include: the scope of general purpose versus application-specific processors, machine code quality for embedded applications, retargetability of the code generation process, machine description formalisms, and code generation methodologies. Code Generation for Embedded Systems is the essential introduction to this fast developing field of research for students, researchers, and practitioners alike.
Download or read book Embedded Systems written by Fabrice Kordon and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the construction of the first embedded system in the 1960s, embedded systems have continued to spread. They provide a continually increasing number of services and are part of our daily life. The development of these systems is a difficult problem which does not yet have a global solution. Another difficulty is that systems are plunged into the real world, which is not discrete (as is generally understood in computing), but has a richness of behaviors which sometimes hinders the formulation of simplifying assumptions due to their generally autonomous nature and they must face possibly unforeseen situations (incidents, for example), or even situations that lie outside the initial design assumptions. Embedded Systems presents the state of the art of the development of embedded systems and, in particular, concentrates on the modeling and analysis of these systems by looking at “model-driven engineering”, (MDE2): SysML, UML/MARTE and AADL. A case study (based on a pacemaker) is presented which enables the reader to observe how the different aspects of a system are addressed using the different approaches. All three systems are important in that they provide the reader with a global view of their possibilities and demonstrate the contributions of each approach in the different stages of the software lifecycle. Chapters dedicated to analyzing the specification and code generation are also presented. Contents Foreword, Brian R. Larson. Foreword, Dominique Potier. Introduction, Fabrice Kordon, Jérôme Hugues, Agusti Canals and Alain Dohet. Part 1. General Concepts 1. Elements for the Design of Embedded Computer Systems, Fabrice Kordon, Jérôme Hugues, Agusti Canals and Alain Dohet. 2. Case Study: Pacemaker, Fabrice Kordon, Jérôme Hugues, Agusti Canals and Alain Dohet. Part 2. SysML 3. Presentation of SysML Concepts, Jean-Michel Bruel and Pascal Roques. 4. Modeling of the Case Study Using SysML, Loïc Fejoz, Philippe Leblanc and Agusti Canals. 5. Requirements Analysis, Ludovic Apvrille and Pierre De Saqui-Sannes. Part 3. MARTE 6. An Introduction to MARTE Concepts, Sébastien Gérard and François Terrier. 7. Case Study Modeling Using MARTE, Jérôme Delatour and Joël Champeau. 8. Model-Based Analysis, Frederic Boniol, Philippe Dhaussy, Luka Le Roux and Jean-Charles Roger. 9. Model-Based Deployment and Code Generation, Chokri Mraidha, Ansgar Radermacher and Sébastien Gérard. Part 4. AADL 10. Presentation of the AADL Concepts, Jérôme Hugues and Xavier Renault. 11. Case Study Modeling Using AADL, Etienne Borde. 12. Model-Based Analysis, Thomas Robert and Jérôme Hugues. 13. Model-Based Code Generation, Laurent Pautet and Béchir Zalila.
Download or read book Model Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.