Download or read book Coatings for Concrete and Cathodic Protection written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford Publishing. This book was released on 1989 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete can suffer severe problems from corrosion of the reinforcement, yet civil and structural engineers may experience difficulties in assessing the remedial work required since training in this field is minimal and access to information is limited.
Download or read book Coating Protection for Reinforcement written by C. Andrade and published by Thomas Telford. This book was released on 1995 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides a technical survey of the most common coating protection systems for steel reinforcement, the use of which is rapidly increasing at present. The text also evaluates the practical effect of the systems and is the result of a research project conducted by a CEB task group which was specifically assembled to address the need for more information in this subject area.
Download or read book Handbook of Coatings for Concrete written by R. Bassi and published by . This book was released on 2002 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of construction, the maintenance and repair of concrete structures has become a core activity and the protection of concrete is thus of primary concern. Coatings for concrete should protect against corrosion of the reinforcement and against surface attack. This book addresses the whole subject in a practical way looking at the chemistry, applications and use of the major categories of coatings.
Download or read book Corrosion and Protection of Reinforced Concrete written by Brian Cherry and published by CRC Press. This book was released on 2021-03-16 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete is the most widely used construction material in the world, and extended performance is rightly expected. Many structures are in aggressive environments, of critical importance and may be irreplaceable, so repair and protection are vital. This book surveys deterioration of concrete, particularly corrosion of the steel reinforcement, and the various chemical, biological, physical and mechanical causes of deterioration. It outlines condition survey and diagnosis techniques by on-site and laboratory measurements. It sets out mechanical methods of protection and repair, such as patching, inhibitors, coatings, penetrants and structural strengthening as well as cathodic protection and other electrochemical methods. This book also gives guidance on preventative measures including concrete technology and construction considerations, coatings and penetrants, alternate reinforcement, permanent corrosion monitoring and durability planning aspects. Asset managers, port engineers, bridge maintenance managers, building managers, heritage structure engineers, plant engineers, consulting engineers, architects, specialist contractors and construction material suppliers who have the task of resolving problems of corrosion of steel reinforced concrete elements will find this book an extremely useful resource. It will also be a valuable reference for students at postgraduate level. Authors The late Professor Brian Cherry of Monash University, Melbourne, Australia was one of the world’s leading corrosion science and engineering educators and researchers. Warren Green of Vinsi Partners, Sydney, Australia is a corrosion engineer and materials scientist. He is also an Adjunct Associate Professor.
Download or read book External Corrosion and Corrosion Control of Buried Water Mains written by Andrew E. Romer and published by American Water Works Association. This book was released on 2004 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water utilities often do not know the specific cause of external corrosion observed on their water mains, and consequently, the chosen preventative measure may not work effectively. Historically, these choices are based on data from other industries (e.g., gas and oil) and may not be suitable for the water industry. Corrosion of metallic pipes can be caused by a variety of mechanisms, each of which requires a different solution. Determining which corrosion mechanism is at work is not a simple matter, because the resulting pipe damage looks similar for all of them. The failure to properly identify corrosion sources may produce prevention systems that are ineffective or do not last. For example, it is not effective to install an anode bag on a main that has a bacteriological corrosion problem. Similarly, an anode bag installed to reduce corrosion caused by a stray impressed current would be quickly used up and would provide only short-term protection. Much recent research on corrosion has focused on internal corrosion, primarily related to water-quality issues, such as lead and copper control and red water. This project will examine external corrosion, which affects the structural integrity of the pipe and makes it vulnerable to leaks and breakage. After identifying the causes of external corrosion, the study will find economical solutions for each type of corrosion and verify them through field trials.
Download or read book Corrosion in Concrete written by and published by . This book was released on 2022-02-23 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cathodic Protection of Steel in Concrete and Masonry written by Paul M. Chess and published by CRC Press. This book was released on 2015-02-04 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated, this second edition of Cathodic Protection of Steel in Concrete and Masonry covers both reinforced concrete and masonry structures, describes in detail the overall design factors involved in cathodic protection (CP), and also provides a theoretical basis for why it works. It refers to the new European standard EN 12696 for cath
Download or read book Cathodic Protection for Reinforced Concrete Structures written by Paul M. Chess and published by CRC Press. This book was released on 2018-10-12 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cathodic protection of reinforced concrete structures is a technique for rescuing corrosion damaged structures and, in certain instances, preventing them from corroding in the first place, and its use is growing. This book is for specialist contractors, large consultants and owners of corrosion damaged structures, and looks at international experience with this technique. It examines why corrosion is occurring, the differences in the application of CP with the stark dichotomy in its success and failure, and finally ways in which its performance can be improved on future installations. Information is valuable, as the success or failure of the CP system has a marked effect on the service life of the structure.
Download or read book Performance of Epoxy coated Reinforcing Steel in Highway Bridges written by Kenneth C. Clear and published by Transportation Research Board. This book was released on 1995 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Bibliography on the Corrosion and Protection of Steel in Concrete written by E. Escalante and published by . This book was released on 1979 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Repair Protection and Waterproofing of Concrete Structures written by Teresa C. Piliouras and published by CRC Press. This book was released on 1997-07-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of recent research into the continued deterioration of reinforced concrete structures has led to a review of methods of investigation and repair techniques. This thoroughly revised and updated new edition brings together the fundamental aspects of this world wide problem and offers advice on how investigations, diagnosis and consequent rem
Download or read book Cathodic Protection of Concrete Bridges written by Jack E. Bennett and published by Strategic Highway Research Program (Shrp). This book was released on 1993 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides explanation, guidance, and direction concerning cathodic protection of concrete bridge elements to the highway engineer who wants to incorporate cathodic protection in a bridge project. The manual which provides background information on corrosion fundamentals, is divided into 3 parts: design, construction, and operation and maintenance. An appendix provides standard specifications for cathodic protection systems for both decks and substructures. The document is intended to be a useful reference for engineers who design and prepare specifications or who oversee turnkey operations.
Download or read book Corrosion Engineering and Cathodic Protection Handbook written by Volkan Cicek and published by John Wiley & Sons. This book was released on 2017-02-17 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Corrosion Engineering and Cathodic Protection Handbook combines the author's previous three works, Corrosion Chemistry, Cathodic Protection, and Corrosion Engineering to offer, in one place, the most comprehensive and thorough work available to the engineer or student. The author has also added a tremendous and exhaustive list of questions and answers based on the text, which can be used in university courses or industry courses, something that has never been offered before in this format. The Corrosion Engineering and Cathodic Protection Handbook is a must-have reference book for the engineer in the field, covering the process of corrosion from a scientific and engineering aspect, along with the prevention of corrosion in industrial applications. It is also a valuable textbook, with the addition of the questions and answers section creating a unique book that is nothing short of groundbreaking. Useful in solving day-to-day problems for the engineer, and serving as a valuable learning tool for the student, this is sure to be an instant contemporary classic and belongs in any engineer's library.
Download or read book Corrosion Prevention by Protective Coatings written by Charles G. Munger and published by . This book was released on 1999 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Steel in Concrete written by John P. Broomfield and published by CRC Press. This book was released on 2023-01-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Steel in Concrete: Understanding, Investigation and Repair is a guide for designing, constructing and maintaining reinforced concrete structures, such as buildings and bridges which are subject to reinforcement corrosion. It presents the basics of theory and practice in steel corrosion in concrete and reviews the latest research and developments, such as progress on measuring the corrosion threshold for chloride-induced corrosion. This third edition compares the currently proliferating major national and international standards and guidance documents. New developments are considered, such as hybrid anodes for electrochemical treatment and the latest research and developments in assessment, such as the use of ground penetrating radar to measure the chloride content of the concrete cover. It overhauls coverage of electrochemical repair and rehabilitation techniques and outlines recent innovations in structural repair and construction and investigates their implications for durability. The book is ideal for practitioners and graduate students in structural engineering and concrete technology.
Download or read book Handbook of Cathodic Corrosion Protection written by Walter von Baeckmann and published by Elsevier. This book was released on 1997-10-17 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all aspects of cathodic protection in terms of both practice and theory.
Download or read book Cathodic Protection written by Volkan Cicek and published by John Wiley & Sons. This book was released on 2013-05-29 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date, comprehensive volume on cathodic protection available The causes and results of corrosion in industrial settings are some of the most important and difficult problems that engineers and scientists face on a daily basis. Coming up with solutions, or not, is often the difference between success and failure, and can have severe economic and environmental consequences. This timely volume covers the state of the art in corrosion chemistry today, for use in industrial applications or as a textbook. Cathodic Protection: Covers the theoretical aspects of cathodic protection and the science of the process Provides practical, workable solutions to the everyday problems that engineers working in the field have with corrosion Is applicable in many different industries, literally anywhere there might be corrosion As a companion to his first book, Corrosion Chemistry, published by Wiley-Scrivener in 2012, Cathodic Protection covers both the theoretical aspects of cathodic protection and the practical applications of the technology. Of use to engineers and scientists across a variety of disciplines and industries, this is the most up-to-date and timely treatment of cathodic protection on the market. Both books together offer the engineer, scientist, or student the most useful guide to corrosion and cathodic protection ever written. Efficient and to the point, these guides are rich in valuable information for the engineer working in the field, the scientist researching this area, or the student hopeful of obtaining a degree in mechanical, petroleum, electrical, process, or chemical engineering. As a reference for the engineer in the field, Cathodic Protection is both a refresher for the veteran on the chemistry of cathodic protection and its uses over a variety of industries. It is the most up-to-date, comprehensive treatment of cathodic protection available, covering the most cutting-edge new processes and theories. For the freshman engineer just entering the field, it is a tremendous introduction to this science. As a textbook, it can be used for a single-semester technical course in undergraduate or postgraduate education for disciplines such as chemistry, chemical engineering, petroleum engineering, civil engineering, material engineering, mechanical engineering, metallurgical engineering, mining engineering, agricultural engineering, and other related technical fields.
