Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Metallic Coatings for Corrosion Control written by V. E. Carter and published by . This book was released on 1977 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Coatings for Corrosion Control describes how metal coatings can control corrosion, the selection process, preparations, suitability, limitations, and how coatings are applied. The book reviews the nature of corrosion, the forms of corrosion (even general, uneven general, even local, narrow pits, cracking), electrochemical mechanism of corrosion, effects of discontinuities in coatings, and economic considerations of coating. It describes pretreatments (such as removal of superficial corrosion, abrading, polishing), the coating processes (molten or spray application, chemical or vapor deposition, diffusion coating), and also coating performance. The rate of corrosion on different metals such as aluminum, cadmium, copper, gold, silver, or tin depends on the presence of an oxide film, solubility, electrodeposits, or tarnish blackening. Gold is resistant to corrosion and tarnishing except in aqua regia. The book recommends the following when the engineer is selecting a type of coating: the environment where it is exposed, the service life required, the substrate material, shape or size of the article, its decorative appeal, mechanical factors, and if there will be any subsequent fabrication. The book is useful for students of civil, structural, and mechanical engineering. Designers and technicians of industrial machinery or maritime equipment will also profit from reading it.
Download or read book Coated Metal written by Leonid Tushinsky and published by Springer Science & Business Media. This book was released on 2002-04-23 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be viewed as a scientific investigation combined with methodological studies. For practical reasons each of the methods is described in the following general manner including: the uses and the scientific investigation tasks; methods of sampling; testing equipment; test preparation; tests; data processing; controversial issues and conclusions. Each of the 37 methods contains a range of 1 to 8 variants. As far as we know, the book is the first publication in the field.
Download or read book Coating and Surface Treatment Systems for Metals written by Dr. Joseph Edwards and published by . This book was released on 1997 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arranged to give prominence to the nature and properties of surfaces rather than to process methods. Describes 76 coatings and surface treatments, including acrylic polymers, cobalt and alloys of it, sprayed or slurry-applied chromium oxide, nitrocarburising of steel and cast iron, oil and oleoresinous paints, silver, thermal hardening and vapor deposited ceramic compounds. Then considers coating and treatment methods, such as cladding, electrophoretic deposition, metal powder coating with organic and inorganic binders, and weld surfacing. A final section presents a guide to coating and treatment characteristics, among the smoothness, solderability, friction coefficient, corrosion protection in various environments, uniformity of thickness, fitness for contact with food, and cost. Paper edition (unseen), $124.00. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Coatings Technology written by Arthur A. Tracton and published by CRC Press. This book was released on 2006-11-07 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from the third edition of The Coatings Technology Handbook, this book focuses entirely on testing, experimental design, and strategies for selecting processing techniques in the coatings, adhesives, paints, and inks industries. Coatings Technology: Fundamentals, Testing, and Processing Techniques contains the latest coating and processing met
Download or read book Fundamental Principles of Manufacturing Processes written by Robert H. Todd and published by Industrial Press Inc.. This book was released on 1994 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a taxonomy of manufacturing processes and discusses general characteristics of the 10 fundamental families, such as mass-reducing, joining, hardening, and surface treatment. The individual processes themselves are described in the companion Reference Guide. Well illustrated. No bibliography. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Introduction to Surface Engineering written by P. A. Dearnley and published by Cambridge University Press. This book was released on 2017-01-16 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points
Download or read book Thermally Sprayed Metal Coatings to Protect Steel Pilings written by James A. Ellor and published by Transportation Research Board. This book was released on 2004 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Research sponsored by the American Association of State Highway and Transportation Officials in cooperation with the Federal Highway Administration."
Download or read book Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2019-10-25 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications discusses in detail, the recent trends in designing, fabricating and manufacturing of smart coatings and thin films for future high-tech. industrial applications related to transportation, aerospace and biomedical engineering. Chapters cover fundamental aspects and diverse approaches used to fabricate smart self-healing anti-corrosion coatings, shape-memory coatings, polymeric and nano-bio-ceramic cotings, bio-inspired and stimuli-responsive coatings for smart surfaces with antibacterial activkity and controlled wettability, and electrically conductive coatings and their emerging applications. With the emphasis on advanced methodologies and recent emerging applications of smart multifunctional coatings and thin films, this book is essential reading for materials scientists and rsearchers working in chemical sciences, advanced materials, sensors, pharmaceutical and biomedical engineering. - Discusses the most recent advances and innovations in smart multifunctional coatings and thin films in the transportation, aerospace and biomedical engineering industries - Highlights the synthesis methods, processing, testing and characterization of smart coatings and thin films - Reviews the current prospects and future trends within the industry
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Coatings written by Kaushik Kumar and published by Springer Nature. This book was released on 2021-02-01 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent developments in the coating processes, sub processes and emphasizes on processes with the potential to improve performance quality and reproducibility. The book demonstrates how application methods, environmental factors, and chemical interactions affect each surface coating's performance. In addition, it provides analysis of latest polymers, carbon resins, high-temperature materials used for coatings and describes the development, chemical and physical properties, synthesis, polymerization, commercial uses and characteristics for each raw material and coating. Characterization techniques to solve the coating problems are also presented, as well as optimization studies to identify the critical coating parameters to ensure a robust process.
Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.
Download or read book Polymers Coatings written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explores the cutting-edge technology of polymer coatings. It discusses fundamentals, fabrication strategies, characterization techniques, and allied applications in fields such as corrosion, food, pharmaceutical, biomedical systems and electronics. It also discusses a few new innovative self-healing, antimicrobial and superhydrophobic polymer coatings. Current industrial applications and possible potential activities are also discussed.
Download or read book Surface Engineering of Metals written by Tadeusz Burakowski and published by CRC Press. This book was released on 1998-12-23 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.
Download or read book Engineering Coatings written by S Grainger and published by Elsevier. This book was released on 1998-08-24 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now 10 years since the first edition of Engineering Coatings by Stan Grainger appeared. The success of that edition, and the developments in the area since its publication make this new edition a valuable additionto the literature on the subject.This new edition describes the many methods by which surface coatings or surface modification can be carried out to delay surface degradation and prolong the useful life of engineering components. Since surface technology has advanced in many areas, new techniques such as the newer thermal spray processes and laser surfacing are now covered and the book has been expanded to include more coverage on corrosion.Major changes have also taken place in health and safety legislation, and the sections covering health and safety have been entirely revised as a result. Engineering Coatings with its breadth of coverage and sound basis inindustrial practice is an invaluable guide to methods which have the potential to save money in many industries concerned with wear, corrosion, welding and thermal spraying of engineering components.
Download or read book The Complete Technology Book on Electroplating Phosphating Powder Coating and Metal Finishing 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2021-01-01 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroplating is the process of depositing a metal coating onto the surface of an object through the use of an electrical current. Electroplating has evolved into a highly complex process requiring a high level of precision and expertise. Phosphating is the process of converting a steel surface to iron phosphate. This is mostly used as a pretreatment method in conjunction with another method of corrosion protection. Powder coating is a finishing process in which a coating is applied electrostatically to a surface as a free-floating, dry powder before heat is used to finalize the coating. The powder can be made of any number of products: polyester, polyurethane, polyester-epoxy, straight epoxy, and acrylics. Metal finishing is the final step in the manufacturing process used to provide aesthetics and environmental protection. The electroplating market mostly is driven by the electronics and electrical industry and followed by the automotive industry. The demand for electroplating is rising rapidly from the end user industries which propel the growth of the market. The increasing demand for durable metals and growing use of adaptable manufacturing processes for a wide range of applications in the automotive, aerospace & defense, and electrical & electronics industries are likely to boost the demand for electroplating. With the growing demand for high-performance automobile components having excellent resistance to corrosion to enhance the appearance of exterior automobile parts, such as emblems, door handles, hood ornaments, and wheel rims, is driving the demand for electroplating and likely to continue owing to the increasing automobiles production in Asia-Pacific and other emerging economies in the Middle East & Africa. The zinc-nickel electroplating is one of the popular methods of electroplating in the automotive industry. The book cover various aspects related to different Electroplating, Phosphating, Powder Coating and Metal Finishing with their manufacturing process and also provides contact details of machinery suppliers with equipment photographs and plant layout. A total guide to manufacturing and entrepreneurial success in one of today’s complete process of electroplating to metal finishing in industry. This book is one-stop guide to one of the fastest growing electroplating, phosphating, powder coating and metal finishing industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. The book serves up a feast of how-to information, from concept to purchasing equipment.
