Download or read book Coal Combustion and Gasification written by L.Douglas Smoot and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of coal is required to help satisfy the world's energy needs. Yet coal is a difficult fossil fuel to consume efficiently and cleanly. We believe that its clean and efficient use can be increased through improved technology based on a thorough understanding of fundamental physical and chemical processes that occur during consumption. The principal objective of this book is to provide a current summary of this technology. The past technology for describing and analyzing coal furnaces and combus tors has relied largely on empirical inputs for the complex flow and chemical reactions that occur while more formally treating the heat-transfer effects. GrOWing concern over control of combustion-generated air pollutants revealed a lack of understanding of the relevant fundamental physical and chemical mechanisms. Recent technical advances in computer speed and storage capacity, and in numerical prediction of recirculating turbulent flows, two-phase flows, and flows with chemical reaction have opened new opportunities for describing and modeling such complex combustion systems in greater detail. We believe that most of the requisite component models to permit a more fundamental description of coal combustion processes are available. At the same time there is worldwide interest in the use of coal, and progress in modeling of coal reaction processes has been steady.
Download or read book Coal Combustion Byproducts and Environmental Issues written by Kenneth S. Sajwan and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Combustion Byproducts and Environmental Issues addresses the major implications and critical issues surrounding coal combustion products and their impact upon the environment. It provides essential information for scientists conducting research on coal and coal combustion products, but also serves as a valuable reference for a wide variety of researchers and other professionals in the energy industry and in the fields of public health, engineering, and environmental sciences. The ultimate goal of this volume is to benefit both our economy and our environment as humanity enters the second half of the fossil fuel era.
Download or read book Coal Combustion Products CCPs written by Tom Robl and published by Woodhead Publishing. This book was released on 2017-05-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Combustion Products (CCPs): Their Nature, Utilization and Beneficiation is a valuable resource for engineers and scientists from the coal, cement, concrete, and construction industries seeking an in-depth guide to the characteristics, utilization, beneficiation, and environmental impacts of coal combustion by-products. Researchers in universities working in this area will also find much to expand their knowledge. The book provides a detailed overview of the different waste materials produced during power generation from coal, exploring their nature, beneficiation techniques, applications, and environmental impacts. Strong focus is placed on coal fly ash, bottom ash, and flue gas desulfurization materials, and their employment in cement, concrete, gypsum products, aggregates, road construction, geotechnics, and agriculture, among other products and industries. Part 1 focuses on the nature of coal ashes, with chapters on their origin, generation, and storage, both in ponds and landfill. The coal combustion by-products produced as a result of clean coal technologies are the focus of the final chapter in the section. The next group of chapters in Part 2 considers the utilization of different waste materials, including the key products coal fly ash, bottom ash, and flue gas desulfurization materials. This is followed by a contribution reviewing the latest research into innovative and advanced uses for coal ash. After an introduction to ash quality problems and quality monitoring, Part 3 concentrates on the essential area of by-product beneficiation techniques, in other words how to maximize the quality of materials for the end user. Topics covered include separation methods, thermal processing, and chemical passivation. The final section of the book addresses environmental issues, including the use of coal combustion by-products in green construction materials and the essential health and safety considerations associated with their use.
Download or read book Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas written by Dobrin Toporov and published by Elsevier. This book was released on 2014-05-30 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas focuses on a niche technology, combustion of coal in an oxygen rich environment, which is one approach to obtaining 'clean coal,' by making it easier to capture carbon that is released in the combustion process. Toporov's book breaks ground on covering the key fundamentals of oxycoal technologies, which have not yet been covered in this depth. Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas summarizes the main results from a pioneering work on experimental and numerical investigations of oxyfuel technologies. It provides the theoretical background of the process, the problems to be faced, and the technical solutions that were achieved during these investigations. - Summarizes results from investigations of oxyfuel technologies performed at Aachen University, Germany - Provides theoretical background, as well as the primary problems of these technologies and how they can be solved
Download or read book Coal Fired Generation written by Paul Breeze and published by Academic Press. This book was released on 2015-07-17 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal-Fired Generation is a concise, up-to-date and readable guide providing an introduction to this traditional power generation technology. It includes detailed descriptions of coal fired generation systems, demystifies the coal fired technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. - Focuses on the evolution of the traditional coal-fired generation - Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations
Download or read book Fundamentals of the Physical Chemistry of Pulverized Coal Combustion written by L. Lahaye and published by Springer Science & Business Media. This book was released on 1987-08-31 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of coal for the production of energy is certainly not a new area of research. Many research works were carried out to improve the efficiency of industrial and domestic facilities. In the sixties, however, because of the availability and low cost of petroleum, coal consumption decreased and the research effort in this area was minimum. Meanwhile, the situation has totally changed. Considering the reserves of oil and the instability ofregions where they are located, it is becoming absolutely necessary to develop other sources of energy.The major alternative to oil appears to be coal, at least for the near future. Indeed, the reserves known today represent several centuries of energy consumption.!t is therefore becoming urgent to develop efficient and non polluting technologies to produce energy from coal. The main possibilities are : · liquefaction · gasification · directed combustion. Research and development efforts on liquefaction have been considerably reduced because of high cost of technologies involved and poor prospects for the next two decades. Research works on gasification are progressing; it is a promising approach. However, direct combustion either in pulverized coal furnaces or in fluidized beds is the more promising way of expanding rapidly the utilization of coal. These techniques are already used in some facilities but many environmental problems remain, slowing down their development.
Download or read book Mineral Impurities in Coal Combustion written by Erich Raask and published by CRC Press. This book was released on 1985 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ash from Coal and Biomass Combustion written by Ashok K. Singh and published by Springer. This book was released on 2020-10-28 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise book with comprehensive information on coal and biomass ash generated from their combustion in thermal power plants. It presents detailed studies on ash generated from contrasting coal and biomass feedstocks, and provides a comparative evaluation of these different ashes in terms of their origin, properties, environmental hazards. Potential utilizations with specific advantages and disadvantages of the respective ashes are elaborated in detail, including some innovative means of ash utilization for value addition purposes. By addressing both the theory and commercial exploitation of these products, this book will be helpful for industrialists, academicians and researchers alike.
Download or read book Clean Coal and Sustainable Energy written by Junfu Lyu and published by Springer Nature. This book was released on 2021-09-29 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 9th International Symposium on Coal Combustion, held in Qingdao, China in July 2019. It provides the latest research results on techniques for pulverized coal combustion and fluidized bed combustion, low-carbon energy and emission controls, and industrial applications. Highlighting research areas that are of great importance in promoting collaboration between related subjects and the technical development of coal-related fields, the book offers a valuable reference guide for researchers and engineers alike.
Download or read book Fundamentals of Coal Combustion written by Leon Douglas Smoot and published by Elsevier Publishing Company. This book was released on 1993 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a broad, integrated treatment of the fundamentals of coal combustion and gasification. Most of the authors are recognized professionals in the field and all are conducting research work in the Advanced Combustion Engineering Research Center. The focus of the book is on clean and efficient use of coal. Practical chapters on coal processes, including coal technology projects and on acid rain formation control, lay a foundation for the fundamental treatment. The book is comprehensive in its treatment with over 1000 world-wide references, most of which are from the past five years.
Download or read book Pulverized Coal Combustion and Gasification written by L. Smoot and published by Springer. This book was released on 2013-03-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: viii and approaches could be adapted to other coal conversion and combustion problems, we have not considered combustion or gasification in fluidized or fixed beds or in situ processes. In addition, we have not considered other fossil-fuel combustion problems associated with oil shale, tar sands, etc., even though many aspects of pulverized-coal combustion would relate to these problems. For the case of pulverized-coal models, we have attempted to provide a detailed description of the model foundations. Parts I and II of this book emphasize general principles for describing reacting, turbulent or laminar, multiphase systems. General conservation equations are developed and summarized. The basis for computing thermochemical equilibrium in complex, heterogeneous mixtures is presented, together with techniques for rapid computation and reference to required input data. Rate processes are then discussed, including pertinent aspects of turbulence, chemical kinetics, radiative heat transfer, and gas-particle convective-diffusive interactions. Much of Part II deals with parameters and coefficients for describing these complex rate processes. This part of the book provides recommended values of coefficients and parameters for treating complex reacting flows. Parts I and II may well be suitable for use in an advanced course in reacting flows, and have been written partly with that in mind. Part III deals with more specific aspects of pulverized-coal characteristics and rate processes. Following a general description of coal structure and constitution, coal pyrolysis and char oxidation processes are considered.
Download or read book Underground Coal Gasification and Combustion written by Michael S. Blinderman and published by Woodhead Publishing. This book was released on 2017-11-28 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Coal Gasification (UCG) is carried out in unmined coal seams, using wells drilled from the surface and converting coal into synthesis gas. The gas can be used for power generation and synthesis of automotive fuels, fertilizers and other products. UCG offers financial, social, and environmental benefits over conventional coal extraction and utilization methods and may play a critical role in ensuring energy security in the future. Underground Coal Gasification and Combustion provides an overview of underground coal gasification technology, its current status and future directions. Comprehensive in approach, the book covers history, science, technology, hydrogeology, rock mechanics, environmental performance, economics, regulatory and commercial aspects of UCG projects. The first book on the subject in forty years, it is unique in analysing more than a century of global UCG developments by experts from Australia, Canada, Poland, Russia, Ukraine, United Kingdom, the USA and Uzbekistan. - Provides researchers, engineers, industry, educators and regulators with an authoritative overview of science and practical applications of underground coal gasification technologies - Offers insight into efficiency, environmental performance, costs, permitting issues and commercial aspects of UCG projects - Written by scientists and practitioners of UCG technology sharing hands-on experience of step-by-step UCG implementation
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
Download or read book Applied Coal Petrology written by Isabel Suárez-Ruiz and published by Academic Press. This book was released on 2008 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of basic coal properties is important for achieving reductions in trace element emissions and improving the efficiency of combustion and combined-cycle gasification. The production of methane from coal beds is related to the properties of the in situ coal. Similarly, coal bed sequestration of carbon dioxide produced from combustion is dependent on the reservoir properties. Environmental problems accompany coal on its way from the mine to the point of utilization and beyond. Health aspects related with coal mining and coal utilization are also included because, in planning for coal use, it is impossible to separate environmental and health issues from the discussion of coal utilization. The book is aimed at a wide audience, ranging from researchers, lecturers and students to professionals in industry and discusses issues (such as the environmental, and health) that are of concern to the general public as a whole.-
Download or read book Combustion Ash Residue Management written by Richard W. Goodwin and published by William Andrew. This book was released on 2013-12-05 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Ash and Residue Management assists owners and operators of Coal-fired and Resource Recovery Power Plants. By applying the principles and reviewing the case studies examples described within this book, accidents and upsets can be avoided and regulatory permitting can be achieved – reducing costs. This unique book is an essential reference for anybody responsible for disposal or utilization of combustion residues. It reflects over 30 years of engineering practice, applying the principles of concrete chemistry and civil engineering/soil mechanics as confirmed by field data. Dr. Richard Goodwin assesses the composition and environmental impact of combustion residues, and provides not only best practices for safe disposal, but also a blueprint for effective reuse, including applications like structural fill, grout, and capping material. Case studies and cost information for ash disposal options are included, in addition to the lessons learned by high-profile failures, such as the TVA Kingston fossil plant coal fly ash slurry spill in 2008. It also applies engineering principles to discuss how to avoid future upsets, including better operator training and monitoring methods. - A comprehensive update to reflect changes in legislation and practice, including new material on the safe disposal or beneficial use of coal ash - A straightforward engineering approach, providing practical guidance and field data - Written by an established expert in the field
Download or read book Coal Fired Power Generation Handbook written by James G. Speight and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal accounts for approximately one quarter of world energy consumption and of the coal produced worldwide approximately 65% is shipped to electricity producers and 33% to industrial consumers, with most of the remainder going to consumers in the residential and commercial sectors. The total share of total world energy consumption by coal is expected to increase to almost 30% in 2035. This book describes the challenges and steps by which electricity is produced form coal and deals with the challenges for removing the environmental objections to the use of coal in future power plants. New technologies are described that could virtually eliminate the sulfur, nitrogen, and mercury pollutants that are released when coal is burned for electricity generation. In addition, technologies for the capture greenhouse gases emitted from coal-fired power plants are described and the means of preventing such emissions from contributing to global warming concerns. Written by one of the world’s leading energy experts, this volume is a must-have for any engineer, scientist, or student working in this field, providing a valuable reference and guide in a quickly changing field.
Download or read book Advanced Pulverized Coal Injection Technology and Blast Furnace Operation written by K. Ishii and published by Elsevier. This book was released on 2000-11-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to reduce the cost of running blast furnaces (BFs), injected pulverized coal is used rather than coke to fire BFs. As a result of this, unburned fine materials are blown with the gas into the bosh and dead man areas with possible detrimental effects on gas flow and permeability of the coke column. The capacity of the furnace to consume these particles by solution loss is probably one of the limitations to coal injection. It is, therefore, important to understand the physicochemical and aerodynamic behaviour of fines including the change of in-furnace phenomena.The Committee of Pulverized Coal Combustion and In-Furnace Reaction in BF was set up in 1993 as a cooperative research of the Japan Society for the Promotion of Science (JSPS) and the Iron and Steel Institute (ISIJ) to evaluate research initiative into this problem.This book reports on the JSPS/ISIJ Committee's activities and describes the interpretation of findings drawn from combustion experiments and the results of live furnace applications, and furnace performance.
