Download or read book Co Optimization of Fuels Engines Efficiency Merit Function for Spark Ignition Engines Revisions and Improvements Based on FY16 17 Research written by and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early in fiscal year 2016 (FY16), a fuel efficiency 'merit function' was developed to provide a simple tool to evaluate the potential thermal efficiency benefits of various fuels when multiple fuel properties or performance metrics are changing simultaneously. It has also proven to be useful for evaluating various fuel candidates and provides a useful framework for capturing and summarizing results from multiple projects within the Co-Optima Fuel Properties and Advanced Engine Development research portfolios. The objective of this report is to collect pertinent research results from FY16 and the first half of FY17, and to integrate them into an improved merit function.

Download or read book Efficiency Merit Function for Spark ignition Engines written by Paul Miles and published by . This book was released on 2018 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Selection Criteria for Sustainable Fuels for High Efficiency Spark Ignition Engines with Examination of their Storage Stability Impact on Engine Knock and Fine Particle Emissions written by and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is possible to significantly improve the efficiency of spark-ignition engines given fuels with improved autoignition, evaporative cooling, and particle emission properties. At the same time, a vast range of different fuel chemistries are accessible from biomass - leading to questions about how fuel chemistries outside the range available from petroleum and ethanol can impact engine operation. This presentation will briefly describe the factors leading to poor efficiency in current SI engines, and the technologies available for improving efficiency. Improved fuel properties that enable high efficiency engine designs to be pursued aggressively will be reviewed, including octane index and sensitivity. A screening process based on fuel properties was applied to a large set of proposed biomass-derived gasoline blendstocks, and the properties of the best blendstocks were evaluated. Some of these fuels exhibit poor stability towards oxidation in the liquid phase, and storage stability studies for alkyl furans and cyclopentanone will be presented in brief. The importance of fuel heat of vaporization for direct injection engines, along with new research on measurement of this parameter, will be presented including an SI engine study of the impact of heat of vaporization on octane index and engine knock. Fuel effects on fine particle emissions and how our understanding breaks down for oxygenates will be discussed. Engine combustion experiments, droplet evaporation simulations, and heat of vaporization measurements conducted to better understand how oxygenates affect particle emissions will be described. This research defines a process that can be used to evaluate fuels for other types of combustion such as diesel, gasoline compression ignition, or strategies with mixed modes.

Download or read book OPTIMIZATION AND COMPARISON OF OVER EXPANDED AND OTHER HIGH EFFICIENCY FOUR STROKE SPARK IGNITED BOOSTED ENGINES written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Recent fuel economy and emission regulations are the major concern of the research and development of modern internal combustion engine. Such technologies include variable valve timing (VVT), direct injection (DI), turbocharging, downsizing, and over-expanded cycle are used by many manufacturers to improve engine fuel economy or increase power density. Current Atkinson cycle technology in the production engine is mainly realized by an advanced valvetrain system to reduce the effective compression ratio while maintaining the same expansion ratio. Another approach to realize over-expanded cycle engine is to utilize a multi-link cranktrain mechanism. Although the Atkinson cycle was originally patented in the 1880s, the research of the over-expanded cycle engine realized by a multi-link cranktrain design is incomplete. This study focuses on the investigation of over-expanded engine realized by a cranktrain with a multi-link mechanism. The multi-link mechanism of cranktrain was developed and simulated with the constraints of packaging and match the same specification as the baseline engine including compression ratio, bore, and intake/compression stroke. This study also discusses adapting the cam profiles, cam phasing, and spark timing to compensate for the geometric characteristics difference between an Atkinson cycle engine and a conventional engine. The 1-D engine model was developed and calibrated in the commercial engine program, GT-Suite/GT-Power, based on the experimental results from a production four-cylinder spark-ignited engine (not over-expanded). The simulations of multi-link over-expanded engine and high compression engine were realized by substituting the new cranktrain for the baseline cranktrain In this study, the investigation of the multi-link over-expanded engine included a series of operating conditions from light load to high load. The results were compared at the optimized condition between the baseline engine, multi-link over-expand engine, and high compression engine. At the light load condition, it was observed that the net indicated efficiency of the over-expanded engine was slightly improved based on the adjustment method. This study also investigated the operating condition of the baseline engine with knock constrained and exhaust temperature constrained conditions at medium to high load. With the optimization, the over-expanded cycle engine is less constrained than the baseline engine due to the reduced knock propensity and exhaust gas temperature resulting in the further improvement of net indicated efficiency. The study of the multi-link over-expanded cycle engine includes the comparison with the latest production high compression ratio engine, representing state-of-the-art high efficiency engine technologies. The net indicated efficiency of multi-link over-expanded engine is even better than the peak efficiency point of the high compression engine.

Download or read book E85 Optimized Engine Through Boosting Spray Optimized DIG VCR and Variable Valvetrain written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of biofuels for internal combustion engines has several well published advantages. The biofuels, made from biological sources such as corn or sugar cane, are renewable resources that reduce the dependence on fossil fuels. Fuels from agricultural sources can therefore reduce a countries energy dependency on other nations. Biofuels also have been shown to reduce CO2 emissions into the atmosphere compared to traditional fossil based fuels. Because of these benefits several countries have set targets for the use of biofuels, especially ethanol, in their transportation fuels. Small percentages of ethanol are common place in gasoline but are typically limited to 5 to 8% by volume. Greater benefits are possible from higher concentrations and some countries such as the US and Sweden have encouraged the production of vehicles capable of operating on E85 (85% denatured ethanol and 15% gasoline). E85 capable vehicles are normally equipped to run the higher levels of ethanol by employing modified fuel delivery systems that can withstand the highly corrosive nature of the alcohol. These vehicles are not however equipped to take full advantage of ethanol's properties during the combustion process. Ethanol has a much higher blend research octane number than gasoline. This allows the use of higher engine compression ratios and spark advance which result in more efficient engine operation. Ethanol's latent heat of vaporization is also much higher that gasoline. This higher heat of vaporization cools the engine intake charge which also allows the engine compression ratio to be increased even further. An engine that is optimized for operation on high concentrations of ethanol therefore will have compression ratios that are too high to avoid spark knock (pre-ignition) if run on gasoline or a gasoline/ethanol blend that has a low percentage alcohol. An engine was developed during this project to leverage the improved evaporative cooling and high octane of E85 to improve fuel economy and offset E85's lower energy content. A 2.0 L production Direct Injection gasoline, (DIg) engine employing Dual Independent Cam Phasing, (DICP) and turbo charging was used as the base engine. Modified pistons were used to increase the geometric compression ratio from 9.2:1 to 11.85:1 by modifying the pistons and adding advanced valvetrain to proved control of displacement and effective compression ratio through valve timing control. The advanced valvetrain utilized Delphi's two step valvetrain hardware and intake cam phaser with increased phasing authority of 80 crank angle degrees. Using this hardware the engine was capable of operating knock free on all fuels tested from E0-E85 by controlling effective compression ratio using a Late Intake Valve Closing, (LIVC) strategy. The LIVC strategy results in changes in the trapped displacement such that knock limited torque for gasoline is significantly lower than E85. The use of spark retard to control knock enables higher peak torque for knock limited fuels, however a loss in efficiency results. For gasoline and E10 fuels, full effective displacement could not be reached before spark retard produced a net loss in torque. The use of an Early Intake Valve Closing, (EIVC) strategy resulted in an improvement of engine efficiency at low to mid loads for all fuels tested from E0- E85. Further the use of valve deactivation, to a single intake valve, improved combustion stability and enabled throttle-less operation down to less than 2 bar BMEP. Slight throttling to trap internal residual provided additional reductions in fuel consumption. To fully leverage the benefits of E85, or ethanol blends above E10, would require a vehicle level approach that would take advantage of the improved low end torque that is possible with E85. Operating the engine at reduced speeds and using advanced transmissions (6 speeds or higher) would provide a responsive efficient driving experience to the customer. The vehicle shift and torque converter lockup points for high ethanol blends could take advantage of the significant efficiency advantage of down-speeding and operating at higher loads to deliver the required power.

Download or read book Potential of Spark Ignition Engine written by Thomas Trella and published by . This book was released on 1980 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuel Properties for Advanced Spark Ignition Engines Insights from the U S DOE Co Optima Project written by and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This presentation, part of the International Summit on Breakout Technologies of Engine and Fuel 2018, discusses fuel properties for advanced spark ignition engines and insights from the U.S. DOE Co-Optima Project.

Download or read book Potential of Spark Ignition Engine Effect of Vehicle Design Variables on Top Speed Performance and Fuel Economy written by Russell W. Zub and published by . This book was released on 1980 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Pathway to Higher Efficiency Internal Combustion Engines Through Thermochemical Recovery and Fuel Reforming written by Flavio Dal Forno Chuahy and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dual fuel reactivity controlled compression ignition (RCCI) combustion is a promising method to achieve high efficiency with near zero NOx and soot emissions; however, the requirement to carry two fuels on-board has limited practical applications. Advancements in catalytic reforming have demonstrated the ability to generate syngas (a mixture of CO and hydrogen) from a single hydrocarbon stream. The reformed fuel mixture can then be used as a low reactivity fuel stream to enable RCCI out of a single parent fuel. Beyond enabling dual-fuel combustion strategies out of a single parent fuel, fuel reforming can be endothermic and allow recovery of exhaust heat to drive the reforming reactions, potentially improving overall efficiency of the system. Previous works have focused on using reformed fuel to extend the lean limit of spark ignited engines, and enhancing the control of HCCI type combustion. The strategy pairs naturally with advanced dual-fuel combustion strategies, and the use of dual-fuel strategies in the context of on-board reforming and energy recovery has not been explored. Accordingly, the work presented in this dissertation attempts to fill in the gaps in the current literature and provide a pathway to "single" fuel RCCI combustion through a combination of experiments and computational fluid dynamics modeling. Initially, a system level analysis focusing on three common reforming techniques (i.e., partial oxidation, steam reforming and auto-thermal reforming) was conducted to evaluate the potential of reformed fuel. A system layout was proposed for each reforming technique and a detailed thermodynamic analysis using first- and second-law approaches were used to identify the sources of efficiency improvements. The results showed that reformed fuel combustion with a near TDC injection of diesel fuel can increase engine-only efficiency by 4% absolute when compared to a conventional diesel baseline. The efficiency improvements were a result of reduced heat transfer and shorter, more thermodynamically efficient, combustion process. For exothermic reforming processes, losses in the reformer outweigh the improvements to engine efficiency, while for endothermic processes the recovery of exhaust energy was able to allow the system efficiency to retain a large portion of the benefits to the engine combustion. Energy flow analysis showed that the reformer temperature and availability of high grade exhaust heat were the main limiting factors preventing higher efficiencies. RCCI combustion was explored experimentally for its potential to expand on the optimization results and achieve low soot and NOx emissions. The results showed that reformed fuel can be used with diesel to enable RCCI combustion and resulted in low NOx and soot emissions while achieving efficiencies similar to conventional diesel combustion. Experiments showed that the ratio H2/(H2+CO) is an important parameter for optimal engine operation. Under part-load conditions, fractions of H2/(H2+CO) higher than 60% led to pressure oscillations inside the cylinder that substantially increased heat transfer and negated any efficiency benefits. The system analysis approach was applied to the experimental results and showed that chemical equilibrium limited operation of the engine to sub-optimal operating conditions. RCCI combustion was able to achieve "diesel like" system level efficiencies without optimization of either the engine operating conditions or the combustion system. Reformed fuel RCCI was able to provide a pathway to meeting current and future emission targets with a reduction or complete elimination of aftertreatment costs. Particle size distribution experiments showed that addition of reformed fuel had a significant impact on the shape of the particle size distribution. Addition of reformed fuel reduced accumulation-mode particle concentration while increasing nucleation-mode particles. When considering the full range of particle sizes there was a significant increase in total particle concentration. However, when considering currently regulated (Dm>23nm) particles, total concentration was comparable. To address limitations identified in the system analysis of the RCCI experiments a solid oxide fuel cell was combined with the engine into a hybrid electrochemical combustion system. The addition of the fuel cell addresses the limitations by providing sufficient high grade heat to fully drive the reforming reactions. From a system level perspective, the impact of the high frequency oscillations observed in the experiments are reduced, as the system efficiency is less dependent on the engine efficiency. From an engine perspective, the high operating pressures and low reactivity of the anode gas allow reduction of the likelihood of such events. A 0-D system level code was developed and used to find representative conditions for experimental engine validation. The results showed that the system can achieve system electrical efficiencies higher than 70% at 1 MWe power level. Experimental validation showed that the engine was able to operate under both RCCI and HCCI combustion modes and resulted in low emissions and stable combustion. The potential of a hybrid electrochemical combustion system was demonstrated for high efficiency power generation

Download or read book Adaptive Optimisation of the Indicated Efficiency in Spark Ignition Engines written by H. Bechmann and published by . This book was released on 1992 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Impact of Combustion Phasing on Energy and Availability Distributions of an Internal Combustion Engine written by Shawn Nicholas Wildhaber and published by . This book was released on 2011 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: "High fuel efficiency has become an extremely desirable trait for internal combustion engines. This motivation has driven extensive research on methods to improve fuel efficiency on engines of various sizes. Many of these methods involve changes to the properties of the combustion process. One way to induce these property changes is through varying the phasing of combustion. Combustion phasing can be defined as the time in the engine cycle, specifically the compression and expansion strokes, where combustion occurs. A change in combustion phasing causes a change in combustion duration. The duration of combustion impacts how the energy and work potential of the energy (availability) from the fuel are utilized. Analysis techniques based on the first and second law of thermodynamics have been developed to determine the energy and availability distributions. These distributions are utilized to visualize and quantify any improvements made to engine efficiency as combustion phasing is altered. The test engine utilized is a spark ignition (SI) engine meaning that the combustion phasing variations are completed by varying the ignition timing. In light of the test platform being a two-cylinder, industrial-use engine, this thesis focuses on determining the impact of combustion phasing on energy and availability distributions in an air-cooled, rich running utility engine subject to tight manufacturing cost constraints"--Abstract, leaf iii.

Download or read book Adaptive Model Based Combustion Phasing Control for Multi Fuel Spark Ignition Engines written by Baitao Xiao and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This research describes a physics-based control-oriented feed-forward model, combined with cylinder pressure feedback, to regulate combustion phasing in a spark-ignition engine operating on an unknown mix of fuels. This research may help enable internal combustion engines that are capable of on-the-fly adaptation to a wide range of fuels. These engines could; (1) facilitate a reduction in bio-fuel processing, (2) encourage locally-appropriate bio-fuels to reduce transportation, (3) allow new fuel formulations to enter the market with minimal infrastructure, and (4) enable engine adaptation to pump-to-pump fuel variations. These outcomes will help make bio-fuels cost-competitive with other transportation fuels, lessen dependence on traditional sources of energy, and reduce greenhouse gas emissions from automobiles; all of which are pivotal societal issues. Spark-ignition engines are equipped with a large number of control actuators to satisfy fuel economy targets and maintain regulated emissions compliance. The increased control flexibility also allows for adaptability to a wide range of fuel compositions, while maintaining efficient operation when input fuel is altered. Ignition timing control is of particular interest because it is the last control parameter prior to the combustion event, and significantly influences engine efficiency and emissions. Although Map-based ignition timing control and calibration routines are state of art, they become cumbersome when the number of control degrees of freedom increases are used in the engine. The increased system complexity motivates the use of model-based methods to minimize product development time and ensure calibration flexibility when the engine is altered during the design process. A closed loop model based ignition timing control algorithm is formulated with: 1) a feed forward fuel type sensitive combustion model to predict combustion duration from spark to 50% mass burned; 2) two virtual fuel property observers for octane number and laminar flame speed feedback; 3) an adaptive combustion phasing target model that is able to self-calibrate for wide range of fuel sources input. The proposed closed loop algorithm is experimentally validated in real time on the dynamometer. Satisfactory results are observed and conclusions are made that the closed loop approach is able to regulate combustion phasing for multi fuel adaptive SI engines.

Download or read book Evaporating Fuel to Improve Spark Ignition Engine Efficiency written by Raouf S. Greiss and published by . This book was released on 1983 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbocharged Spark Ignition Engine Performance and Emissions with Alternative Fuels written by Kelvin Datonye Henry Bob-Manuel and published by . This book was released on 1983 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Evaporating Fuel to Improve Spark Ignition Engine Efficiency written by Raouf S. Greiss and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Use of the Otto Atkinson Cycle to Improve the Part Load Fuel Efficiency of Spark Ignition Engines written by D.J. Bowker and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Improving the Performance and Fuel Consumption of Dual Chamber Stratified Charge Spark Ignition Engines written by and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A combined experimental and theoretical investigation of the nature of the combustion processes in a dual chamber stratified charge spark ignition engine is described. This work concentrated on understanding the mixing process in the main chamber gases. A specially constructed single cylinder engine was used to both conduct experiments to study mixing effects and to obtain experimental data for the validation of the computer model which was constructed in the theoretical portion of the study. The test procedures are described. Studies were conducted on the effect of fuel injection timing on performance and emissions using the combination of orifice size and prechamber to main chamber flow rate ratio which gave the best overall compromise between emissions and performance. In general, fuel injection gave slightly higher oxides of nitrogen, but considerably lower hydrocarbon and carbon monoxide emissions than the carbureted form of the engine. Experiments with engine intake port redesign to promote swirl mixing indicated a substantial increase in the power output from the engine and, that an equivalent power levels, the nitric oxide emissions are approximately 30% lower with swirl in the main chamber than without swirl. The development of a computer simulation of the combustion process showed that a one-dimensional combustion model can be used to accurately predict trends in engine operation conditions and nitric oxide emissions even though the actual flame in the engine is not completely one-dimensional, and that a simple model for mixing of the main chamber and prechamber intake gases at the start of compression proved adequate to explain the effects of swirl, ignition timing, overall fuel air ratio, volumetric efficiency, and variations in prechamber air fuel ratio and fuel rate percentage on engine power and nitric oxide emissions. (LCL).