Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Green Carbon Dioxide written by Gabriele Centi and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROMISING NEW APPROACHES TO RECYCLE CARBON DIOXIDE AND REDUCE EMISSIONS With this book as their guide, readers will learn a variety of new approaches and methods to recycle and reuse carbon dioxide (CO2) in order to produce green fuels and chemicals and, at the same time, minimize CO2 emissions. The authors demonstrate how to convert CO2 into a broad range of essential products by using alternative green energy sources, such as solar, wind, and hydro-power as well as sustainable energy sources. Readers will discover that CO2 can be a driving force for the sustainable future of both the chemical industry and the energy and fuels industry. Green Carbon Dioxide features a team of expert authors, offering perspectives on the latest breakthroughs in CO2 recycling from Asia, Europe, and North America. The book begins with an introduction to the production of CO2-based fuels and chemicals. Next, it covers such topics as: Transformation of CO2 to useable products through free-radical-induced reactions Hydrogenation of CO2 to liquid fuels Direct synthesis of organic carbonates from CO2 and alcohols using heterogeneous oxide catalysts Electrocatalytic reduction of CO2 in methanol medium Fuel production from photocatalytic reduction of CO2 with water using TiO2-based nanocomposites Use of CO2 in enhanced oil recovery and carbon capture and sequestration More than 1,000 references enable readers to explore individual topics in greater depth. Green Carbon Dioxide offers engineers, chemists, and managers in the chemical and energy and fuel industries a remarkable new perspective, demonstrating how CO2 can play a significant role in the development of a sustainable Earth.
Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.
Download or read book Methanation Catalysts written by G. H. Watson and published by . This book was released on 1980 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrodynamics and Mass Transfer in Downflow Slurry Bubble Columns written by Subrata Kumar Majumder and published by CRC Press. This book was released on 2019-01-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slurry bubble column reactors are intensively used as a multiphase reactor in the chemical, biochemical, and petrochemical industries for carrying out reactions and mass transfer operations in which a gas, made up of one or several reactive components, comes into contact or reacts with a liquid. This volume describes the hydrodynamics of three-phase gas-liquid-solid flow in a downflow slurry bubble column. The efficiency of the downflow gas interacting system is characterized by the self-entrainment of secondary gas. The book covers the gas entrainment phenomena, gas holdup characteristics, pressure drop, gasliquid mixing characteristics, bubble size distribution, interfacial phenomena, and the mass transfer phenomena in the downflow slurry system. This volume will be useful in chemical and biochemical industries and in industrial research and development sectors, as well as in advanced education courses in this area. The book will be helpful for further understanding the multiphase behavior in gas interacting multiphase systems for research and development. The hydrodynamic and mass transfer characteristics discussed will be useful in the design and installation of the modified slurry bubble column in industry for specific applications.
Download or read book New Advances in Hydrogenation Processes written by Maryam Takht Ravanchi and published by BoD – Books on Demand. This book was released on 2017-01-25 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen is one of the abundant elements on earth majorly in the form of water (H2O) and mainly as hydrogen gas (H2). Catalytic hydrogenation is a key reaction that has versatile applications in different industries. The main objective of this book is to bring together various applications of hydrogenation through the perspective of leading researchers in the field. This book is intended to be used as a graduate-level text book or as a practical guide for industrial engineers.
Download or read book Methanol The Basic Chemical and Energy Feedstock of the Future written by Martin Bertau and published by Springer Science & Business Media. This book was released on 2014-02-18 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol - The Chemical and Energy Feedstock of the Future offers a visionary yet unbiased view of methanol technology. Based on the groundbreaking 1986 publication "Methanol" by Friedrich Asinger, this book includes contributions by more than 40 experts from industry and academia. The authors and editors provide a comprehensive exposition of methanol chemistry and technology which is useful for a wide variety of scientists working in chemistry and energy related industries as well as academic researchers and even decision-makers and organisations concerned with the future of chemical and energy feedstocks.
Download or read book Greenhouse Gas Carbon Dioxide Mitigation written by Martin M. Halmann and published by CRC Press. This book was released on 1998-11-23 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any mention of the "greenhouse effect" tends to ignite controversy. While the rising atmospheric concentrations of greenhouse gases-especially carbon dioxide- are certainly among the most pressing issues today, theoretical and perceived consequences have been subject to conjecture and misinformation. That raging debate has obscured an important fact: scientists and engineers are hard at work on methods to reduce CO2 emissions, and devise practical methods for their remediation. Greenhouse Gas Carbon Dioxide Mitigation: Science and Technology sheds light on the most recent advancements, documented by two of the world's leading researchers on CO2. Aware of the complexity and still-unknown factors behind climatic change, the authors consider the need to make CO2 mitigation viable for both environmental and economic gain. To that end, Professor Halmann offers new insights into interesting chemical pathways for the conversion of CO2 to useful products. Steinberg adds real-life engineering solutions, applicable to heavy CO2-producing industrial processes, and improving efficiency of energy conversion. Exciting theories and pilot projects are also testing the potential for CO2 utilization, conversion, reduction, and disposal. Greenhouse Gas Carbon Dioxide Mitigation: Science and Technology reports on the use of biomass, such as ocean fertilization and "energy farms," to put CO2 to practical and safe use. Professional and academic readers involved with CO2 research will find Greenhouse Gas Carbon Dioxide Mitigation: Science and Technology an invaluable roadmap for information and inspiration-a way to move beyond argument, and into action.
Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a
Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.
Download or read book Catalytic Conversion of Energy Resources into High Value Added Products written by José Luis Pinilla and published by MDPI. This book was released on 2021-09-02 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing active, selective and energy-efficient heterogeneous catalysts is of paramount importance for the production of high value-added products from energy resources in a more sustainable manner. In this Special Issue of Energies, we provide a showcase of the latest progress in the development of cleaner, more efficient processes for the conversion of these feedstocks into valuable fuels, chemicals and energy. Most of the works collected are focused on the conversion of biomass which clearly reflects the paramount importance that the biorefinery concept will play in the years to come.
Download or read book Greenhouse Gas Control Technologies written by B. Eliasson and published by Elsevier. This book was released on 1999-05-20 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain 270 papers outlining ideas and contributions to the new scientific, technical and political discipline of Greenhouse Gas (GHG) Control. The contributions were presented at the 4th International Conference on Greenhouse Gas Control Technologies (GHGT-4). It was the largest gathering of experts active in this new and fast-developing field.GHGT-4 was different from its predecessors in that it included all greenhouse gases, not only CO2, and all issues which could contribute to the mitigation of the greenhouse problem - technical, economic and political. The main focus was on practical solutions and real demonstrations of mitigation technology being planned and implemented today. It also addressed ways to increase the efficiency of power production and utilisation, and looked at proposals to encourage the development of renewable energy sources.During the Opening Session, 10 keynote addresses were heard from prominent personalities in government, industry and academia. To tackle this very inter-disciplinary problem and to achieve acceptable solutions, it is essential for industry and government to initiate intense dialogue and cooperation. Conferences like this can provide the opportunity for a meeting of minds between engineers and politicians in the face of global challenge. The primary attributes of this global challenge are manifold: the problem is global and international; it is inter-disciplinary, both in substance and approach; it covers technical, political and economic issues and involves government, science, industry and academia; it is complex and non-linear; and it will take the efforts of all parties involved to solve the problem.These proceedings contain ideas for starting demonstration projects and for making better use of the power and flexibility of market measures. They also show it is a problem we can influence and that there is a wealth of ideas. The challenge now is to find the right partners to put these ideas into action.
Download or read book Chemical Abstracts written by and published by . This book was released on 1991 with total page 2470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis An Integrated Approach written by R.A. van Santen and published by Elsevier. This book was released on 2000-09-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Catalytic Hydrogenation written by L. Cervený and published by Elsevier. This book was released on 1986-08-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of contributions in this volume presents the most up-to-date findings in catalytic hydrogenation. The individual chapters have been written by 36 top specialists each of whom has achieved a remarkable depth of coverage when dealing with his particular topic. In addition to detailed treatment of the most recent problems connected with catalytic hydrogenations, the book also contains a number of previously unpublished results obtained either by the authors themselves or within the organizations to which they are affiliated.Because of its topical and original character, the book provides a wealth of information which will be invaluable not only to researchers and technicians dealing with hydrogenation, but also to all those concerned with homogeneous and heterogeneous catalysis, organic technology, petrochemistry and chemical engineering.
