Download or read book CMOS RF Passive Components Modelling and Low Noise Amplifier Design written by Ali Telli and published by . This book was released on 2001 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS RF Device Modeling and Low noise Amplifier Circuit Design written by Jeffrey Jiajiunn Ou and published by . This book was released on 2001 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Linearity CMOS RF Front End Circuits written by Yongwang Ding and published by Springer Science & Business Media. This book was released on 2006-02-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on high performance radio frequency integrated circuits (RF IC) design in CMOS. 1. Development of radio frequency ICs Wireless communications has been advancing rapidly in the past two decades. Many high performance systems have been developed, such as cellular systems (AMPS, GSM, TDMA, CDMA, W-CDMA, etc. ), GPS system (global po- tioning system) and WLAN (wireless local area network) systems. The rapid growth of VLSI technology in both digital circuits and analog circuits provides benefits for wireless communication systems. Twenty years ago not many p- ple could imagine millions of transistors in a single chip or a complete radio for size of a penny. Now not only complete radios have been put in a single chip, but also more and more functions have been realized by a single chip and at a much lower price. A radio transmits and receives electro-magnetic signals through the air. The signals are usually transmitted on high frequency carriers. For example, a t- ical voice signal requires only 30 Kilohertz bandwidth. When it is transmitted by a FM radio station, it is often carried by a frequency in the range of tens of megahertz to hundreds of megahertz. Usually a radio is categorized by its carrier frequency, such as 900 MHz radio or 5 GHz radio. In general, the higher the carrier frequency, the better the directivity, but the more difficult the radio design.

Download or read book CMOS RF Modeling Characterization and Applications written by M. Jamal Deen and published by World Scientific. This book was released on 2002 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.

Download or read book Parasitic Aware Optimization of CMOS RF Circuits written by David J. Allstot and published by Springer Science & Business Media. This book was released on 2005-12-02 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the arena of parasitic-aware design of CMOS RF circuits, efforts are aimed at the realization of true single-chip radios with few, if any, off-chip components. The parasitic-aware RF circuit synthesis techniques described in this book effectively address critical problems in this field.

Download or read book CMOS Low Noise Amplifiers for Single and Multiband Applications A Comprehensive Design Approach written by Norlaili Mohd Noh, Farshad Eshghabadi, Arjuna Marzuki and published by Penerbit USM. This book was released on 2023-10-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

Download or read book Design of Rf Cmos Low Noise Amplifiers written by Changgui Lin and published by LAP Lambert Academic Publishing. This book was released on 2010-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of RF CMOS Low Noise Amplifiers presents the results of research on a gain-boosted common-gate RF low noise amplifier (LNA) in CMOS technology. The book covers noise analysis, design techniques, prototyping of the LNA, as well as broadband modeling for on-chip spiral differential inductors. Beginning with a technical review of LNA architectures and inductor modeling techniques, the authors then introduce a scalable lumped circuit model for octagonal differential inductors. The effect of high frequency current crowding, i.e. proximity effect, is taken into consideration in the lumped circuit model. Subsequently, the book offers comprehensive noise analysis of the LNA and discusses design techniques for noise reduction. Measurement results for a 2.4GHz CMOS LNA and conclusions are included. The book is intended for anyone who is interested in learning essentials of RF CMOS LNA design and basic mathematics of on-chip inductor broadband modeling. The book is also beneficial to engineers and researchers in CMOS RFIC design - especially for WLAN, Bluetooth, and emerging wireless communication applications.

Download or read book LNA ESD Co Design for Fully Integrated CMOS Wireless Receivers written by Paul Leroux and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: LNA-ESD Co-Design for Fully Integrated CMOS Wireless Receivers fits in the quest for complete CMOS integration of wireless receiver front-ends. With a combined discussion of both RF and ESD performance, it tackles one of the final obstacles on the road to CMOS integration. The book is conceived as a design guide for those actively involved in the design of CMOS wireless receivers. The book starts with a comprehensive introduction to the performance requirements of low-noise amplifiers in wireless receivers. Several popular topologies are explained and compared with respect to future technology and frequency scaling. The ESD requirements are introduced and related to the state-of-the-art protection devices and circuits. LNA-ESD Co-Design for Fully Integrated CMOS Wireless Receivers provides an extensive theoretical treatment of the performance of CMOS low-noise amplifiers in the presence of ESD-protection circuitry. The influence of the ESD-protection parasitics on noise figure, gain, linearity, and matching are investigated. Several RF-ESD co-design solutions are discussed allowing both high RF-performance and good ESD-immunity for frequencies up to and beyond 5 GHz. Special attention is also paid to the layout of both active and passive components. LNA-ESD Co-Design for Fully Integrated CMOS Wireless Receivers offers the reader intuitive insight in the LNA’s behavior, as well as the necessary mathematical background to optimize its performance. All material is experimentally verified with several CMOS implementations, among which a fully integrated GPS receiver front-end. The book is essential reading for RF design engineers and researchers in the field and is also suitable as a text book for an advanced course on the subject.

Download or read book Linear CMOS RF Power Amplifiers written by Hector Solar Ruiz and published by Springer Science & Business Media. This book was released on 2013-09-14 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work establishes the design flow for the optimization of linear CMOS power amplifiers from the first steps of the design to the final IC implementation and tests. The authors also focuses on design guidelines of the inductor’s geometrical characteristics for power applications and covers their measurement and characterization. Additionally, a model is proposed which would facilitate designs in terms of transistor sizing, required inductor quality factors or minimum supply voltage. The model considers limitations that CMOS processes can impose on implementation. The book also provides different techniques and architectures that allow for optimization.

Download or read book Millimeter Wave Low Noise Amplifiers written by Mladen Božanić and published by Springer. This book was released on 2017-11-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first standalone book that combines research into low-noise amplifiers (LNAs) with research into millimeter-wave circuits. In compiling this book, the authors have set two research objectives. The first is to bring together the research context behind millimeter-wave circuit operation and the theory of low-noise amplification. The second is to present new research in this multi-disciplinary field by dividing the common LNA configurations and typical specifications into subsystems, which are then optimized separately to suggest improvements in the current state-of-the-art designs. To achieve the second research objective, the state-of-the-art LNA configurations are discussed and the weaknesses of state-of the art configurations are considered, thus identifying research gaps. Such research gaps, among others, point towards optimization – at a systems and microelectronics level. Optimization topics include the influence of short wavelength, layout and crosstalk on LNA performance. Advanced fabrication technologies used to decrease the parasitics of passive and active devices are also explored, together with packaging technologies such as silicon-on-chip and silicon-on-package, which are proposed as alternatives to traditional IC implementation. This research outcome builds through innovation. Innovative ideas for LNA construction are explored, and alternative design methodologies are deployed, including LNA/antenna co-design or utilization of the electronic design automation in the research flow. The book also offers the authors’ proposal for streamlined automated LNA design flow, which focuses on LNA as a collection of highly optimized subsystems.

Download or read book The Design of CMOS Radio Frequency Integrated Circuits written by Thomas H. Lee and published by Cambridge University Press. This book was released on 2004 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2004, is an expanded and revised edition of Tom Lee's acclaimed RFIC text.

Download or read book RF CMOS Power Amplifiers Theory Design and Implementation written by Mona M. Hella and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF CMOS Power Amplifiers: Theory Design and Implementation focuses on the design procedure and the testing issues of CMOS RF power amplifiers. This is the first monograph addressing RF CMOS power amplifier design for emerging wireless standards. The focus on power amplifiers for short is distance wireless personal and local area networks (PAN and LAN), however the design techniques are also applicable to emerging wide area networks (WAN) infrastructure using micro or pico cell networks. The book discusses CMOS power amplifier design principles and theory and describes the architectures and tardeoffs in designing linear and nonlinear power amplifiers. It then details design examples of RF CMOS power amplifiers for short distance wireless applications (e, g., Bluetooth, WLAN) including designs for multi-standard platforms. Design aspects of RF circuits in deep submicron CMOS are also discussed. RF CMOS Power Amplifiers: Theory Design and Implementation serves as a reference for RF IC design engineers and RD and R&D managers in industry, and for graduate students conducting research in wireless semiconductor IC design in general and with CMOS technology in particular.

Download or read book Modeling and Design Techniques for RF Power Amplifiers written by Arvind Raghavan and published by John Wiley & Sons. This book was released on 2008-02-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieve higher levels of performance, integration, compactness, and cost-effectiveness in the design and modeling of radio-frequency (RF) power amplifiers RF power amplifiers are important components of any wireless transmitter, but are often the limiting factors in achieving better performance and lower cost in a wireless communication system—presenting the RF IC design community with many challenges. The next-generation technological advances presented in this book are the result of cutting-edge research in the area of large-signal device modeling and RF power amplifier design at the Georgia Institute of Technology, and have the potential to significantly address issues of performance and cost-effectiveness in this area. Richly complemented with hundreds of figures and equations, Modeling and Design Techniques for RF Power Amplifiers introduces and explores the most important topics related to RF power amplifier design under one concise cover. With a focus on efficiency enhancement techniques and the latest advances in the field, coverage includes: Device modeling for CAD Empirical modeling of bipolar devices Scalable modeling of RF MOSFETs Power amplifier IC design Power amplifier design in silicon Efficiency enhancement of RF power amplifiers The description of state-of-the-art techniques makes this book a valuable and handy reference for practicing engineers and researchers, while the breadth of coverage makes it an ideal text for graduate- and advanced undergraduate-level courses in the area of RF power amplifier design and modeling.

Download or read book CMOS RF Circuit Design for Reliability and Variability written by Jiann-Shiun Yuan and published by Springer. This book was released on 2016-04-13 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is CMOS RF circuit design for reliability. The device reliability and process variation issues on RF transmitter and receiver circuits will be particular interest to the readers in the field of semiconductor devices and circuits. This proposed book is unique to explore typical reliability issues in the device and technology level and then to examine their impact on RF wireless transceiver circuit performance. Analytical equations, experimental data, device and circuit simulation results will be given for clear explanation. The main benefit the reader derive from this book will be clear understanding on how device reliability issues affects the RF circuit performance subjected to operation aging and process variations.

Download or read book An Ultra Wide Band CMOS Low Noise Amplifier Design written by Nahusha Bhadravati Mohankumar and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An RF ultra wide band low noise amplifier designed for the frequency range of 12-18 GHz of operation is presented in this paper. The low noise amplifier is designed using the state-of-the-art complementary metal oxide semiconductor 45 nm technology. Berkeley's Predictive Technology Model (PTM) is used to generate a fairly accurate mathematical model and the SPICE data is implemented into the BSIM 4 version of the Advanced Design Systems (ADS) program. The low noise design strategy is mainly based on the analysis of high frequency CMOS operation. This LNA has two stages: the first stage is a RL feedback amplifier with an inductive load, and the second stage is a RC feedback amplifier with an inductive load. High frequency small signal MOSFET models with shunt-shunt feedback are used to determine the input impedance, output impedance and gain equations governing this circuit. Simulation results of this two stage feedback amplifier demonstrate a gain of 19 dB over a 6 GHz bandwidth, high linearity, and a low noise figure-less than 2.4 dB. This is a low voltage high current amplifier which requires a supply voltage of simply 0.5 V and has low power consumption (~13.5 mW).

Download or read book Reliable RF Power Amplifier Design Based on a Partitioning Design Approach written by Rui Ma and published by kassel university press GmbH. This book was released on 2010 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Front cover -- Titelseite -- Impressum -- Acknowledgments -- Contents -- List of Abbreviations and Acronyms -- Abstract -- Zusammenfassung -- Chapter 1 Introduction -- 1.1 Principle of the Partitioning Design Approach -- 1.2 Dissertation Organization -- Chapter 2 Investigation of Planar-Interconnection -- 2.1 Active Chip Device Interconnection -- 2.1.1 Die Attach -- 2.1.2 Wire Bonding Pad-To-Microstrip -- 2.2 Microstrip-to-Microstrip Interconnection -- 2.2.1 Soldering -- 2.2.2 Multi-Wire Bonding -- 2.2.3 Copper Ribbon -- 2.2.4 Silver- Painting -- Chapter 3 Analysis and Modeling of Passive SMD Components -- 3.1 SMD Resistor -- 3.2 SMD Capacitor -- 3.3 SMD Inductor -- Chapter 4 Modeling of AlGaAs/GaAs HEMT Chip Device -- 4.1 AIGaAs/GaGa HEMT Chip -- 4.2 Modeling Approach Overview -- 4.3 Small-Signal Modeling -- 4.3.1 Extrinsic Parameter Extraction -- 4.3.2 Intrinsic Parameter Extraction -- 4.4 Large-Signal Modeling -- 4.4.1 Gate Current and Charge Models -- 4.4.2 Drain Current Model -- 4.4.3 Model Verification -- Chapter 5 Demonstrator Design of a Class-AB Power Amplifier Following -- 5.1 Micro-Packaged Device Characterization -- 5.1.1 Small-Signal Performance -- 5.1.2 Large-Signal Performance -- 5.2 Bias Network Design -- 5.2.1 Drain Bias Network -- 5.2.2 Gate Bias Network -- 5.3 Matching Network Design -- 5.3.1 Matching Impedance Determination -- 5.4 Power Amplifier Performance Evaluation -- 5.4.1 Small-Signal Performance -- 5.4.2 Large-Signal Performance -- Chapter 6 Conclusions and Outlook -- Appendix -- Appendix A THLR In-Fixture Calibration -- Appendix B Precise Determination of Substrate Permittivity -- Appendix C Schematic Circuit of the Designed Power Amplifier Demonstrator -- Appendix D Power Amplifier Design Following the Conventional Design Approach -- References -- Back cover

Download or read book Fundamentals of RF and Microwave Transistor Amplifiers written by Inder Bahl and published by John Wiley & Sons. This book was released on 2009-06-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Up-to-Date Treatment of RF and Microwave Transistor Amplifiers This book provides state-of-the-art coverage of RF and microwave transistor amplifiers, including low-noise, narrowband, broadband, linear, high-power, high-efficiency, and high-voltage. Topics covered include modeling, analysis, design, packaging, and thermal and fabrication considerations. Through a unique integration of theory and practice, readers will learn to solve amplifier-related design problems ranging from matching networks to biasing and stability. More than 240 problems are included to help readers test their basic amplifier and circuit design skills-and more than half of the problems feature fully worked-out solutions. With an emphasis on theory, design, and everyday applications, this book is geared toward students, teachers, scientists, and practicing engineers who are interested in broadening their knowledge of RF and microwave transistor amplifier circuit design.