Download or read book The Chicago Manual of Style written by University of Chicago. Press and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Searchable electronic version of print product with fully hyperlinked cross-references.
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book Smart CMOS Image Sensors and Applications written by Jun Ohta and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their high noise immunity and low static power supply drain, complementary metal-oxide-semiconductor (CMOS) devices produce less heat than other forms of logic and allow a high density of logic functions on a chip. These beneficial characteristics have fueled the use of CMOS image sensors in consumer electronics, robot vision, biotechnology, and medicine. With the introduction of smart functions in CMOS image sensors, even more versatile applications are now possible. Exploring this popular technology, Smart CMOS Image Sensors and Applications focuses on the smart functions implemented in CMOS image sensors as well as the applications of these sensors. After discussing the history of smart CMOS image sensors, the book describes the fundamental elements of CMOS image sensors. It covers some optoelectronic device physics and introduces typical CMOS image sensor structures, such as an active pixel sensor (APS). Subsequent chapters elucidate the functions and materials of smart CMOS image sensors and present examples of smart imaging. The final chapter explores various applications of smart CMOS image sensors. Several appendices supply a range of information on constants, illuminance, MOSFET characteristics, and optical resolution. This book provides a firm foundation in existing smart CMOS image sensor technology and applications, preparing you for the next phase of smart CMOS image sensors.
Download or read book CMOS Imagers written by Orly Yadid-Pecht and published by Springer Science & Business Media. This book was released on 2004-05-31 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of writing a book on CMOS imaging has been brewing for several years. It was placed on a fast track after we agreed to organize a tutorial on CMOS sensors for the 2004 IEEE International Symposium on Circuits and Systems (ISCAS 2004). This tutorial defined the structure of the book, but as first time authors/editors, we had a lot to learn about the logistics of putting together information from multiple sources. Needless to say, it was a long road between the tutorial and the book, and it took more than a few months to complete. We hope that you will find our journey worthwhile and the collated information useful. The laboratories of the authors are located at many universities distributed around the world. Their unifying theme, however, is the advancement of knowledge for the development of systems for CMOS imaging and image processing. We hope that this book will highlight the ideas that have been pioneered by the authors, while providing a roadmap for new practitioners in this field to exploit exciting opportunities to integrate imaging and “smartness” on a single VLSI chip. The potential of these smart imaging systems is still unfulfilled. Hence, there is still plenty of research and development to be done.
Download or read book CMOS Digital Integrated Circuits written by Sung-Mo Kang and published by . This book was released on 2002 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of CMOS Digital Integrated Circuits: Analysis and Design continues the well-established tradition of the earlier editions by offering the most comprehensive coverage of digital CMOS circuit design, as well as addressing state-of-the-art technology issues highlighted by the widespread use of nanometer-scale CMOS technologies. In this latest edition, virtually all chapters have been re-written, the transistor model equations and device parameters have been revised to reflect the sigificant changes that must be taken into account for new technology generations, and the material has been reinforced with up-to-date examples. The broad-ranging coverage of this textbook starts with the fundamentals of CMOS process technology, and continues with MOS transistor models, basic CMOS gates, interconnect effects, dynamic circuits, memory circuits, arithmetic building blocks, clock and I/O circuits, low power design techniques, design for manufacturability and design for testability.
Download or read book CMOS IC Layout written by Dan Clein and published by Elsevier. This book was released on 1999-01-07 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes basic methodologies, review of basic electrical rules and how they apply, design rules, IC planning, detailed checklists for design review, specific layout design flows, specialized block design, interconnect design, and also additional information on design limitations due to production requirements. *Practical, hands-on approach to CMOS layout theory and design *Offers engineers and technicians the training materials they need to stay current in circuit design technology. *Covers manufacturing processes and their effect on layout and design decisions
Download or read book CMOS Biotechnology written by Hakho Lee and published by Springer Science & Business Media. This book was released on 2007-05-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lately, there has been a growing interest in exploiting the benefits of the ICs for areas outside of the traditional application spaces. One noteable area is found in biology Bioanalytical instruments have been miniaturized on ICs to study various biophenomena or to actuate biosystems. These biolab-on-IC systems utilize the IC to facilitate faster, repeatable, and standardized biological experiments at low cost with a small volume of biological sample. The research activities in this field are expected to enjoy substantial growth in the foreseeable future. BioCMOS Technologies reviews these exciting recent efforts in joining CMOS technology with biology.
Download or read book Tradeoffs and Optimization in Analog CMOS Design written by David Binkley and published by John Wiley & Sons. This book was released on 2008-09-15 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog CMOS integrated circuits are in widespread use for communications, entertainment, multimedia, biomedical, and many other applications that interface with the physical world. Although analog CMOS design is greatly complicated by the design choices of drain current, channel width, and channel length present for every MOS device in a circuit, these design choices afford significant opportunities for optimizing circuit performance. This book addresses tradeoffs and optimization of device and circuit performance for selections of the drain current, inversion coefficient, and channel length, where channel width is implicitly considered. The inversion coefficient is used as a technology independent measure of MOS inversion that permits design freely in weak, moderate, and strong inversion. This book details the significant performance tradeoffs available in analog CMOS design and guides the designer towards optimum design by describing: An interpretation of MOS modeling for the analog designer, motivated by the EKV MOS model, using tabulated hand expressions and figures that give performance and tradeoffs for the design choices of drain current, inversion coefficient, and channel length; performance includes effective gate-source bias and drain-source saturation voltages, transconductance efficiency, transconductance distortion, normalized drain-source conductance, capacitances, gain and bandwidth measures, thermal and flicker noise, mismatch, and gate and drain leakage current Measured data that validates the inclusion of important small-geometry effects like velocity saturation, vertical-field mobility reduction, drain-induced barrier lowering, and inversion-level increases in gate-referred, flicker noise voltage In-depth treatment of moderate inversion, which offers low bias compliance voltages, high transconductance efficiency, and good immunity to velocity saturation effects for circuits designed in modern, low-voltage processes Fabricated design examples that include operational transconductance amplifiers optimized for various tradeoffs in DC and AC performance, and micropower, low-noise preamplifiers optimized for minimum thermal and flicker noise A design spreadsheet, available at the book web site, that facilitates rapid, optimum design of MOS devices and circuits Tradeoffs and Optimization in Analog CMOS Design is the first book dedicated to this important topic. It will help practicing analog circuit designers and advanced students of electrical engineering build design intuition, rapidly optimize circuit performance during initial design, and minimize trial-and-error circuit simulations.
Download or read book CMOS Logic Circuit Design written by John P. Uyemura and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date treatment of the analysis and design of CMOS integrated digital logic circuits. The self-contained book covers all of the important digital circuit design styles found in modern CMOS chips, emphasizing solving design problems using the various logic styles available in CMOS.
Download or read book High Speed Photodiodes in Standard CMOS Technology written by Sasa Radovanovic and published by Springer Science & Business Media. This book was released on 2006-10-11 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed Photodiodes in Standard CMOS Technology describes high-speed photodiodes in standard CMOS technology which allow monolithic integration of optical receivers for short-haul communication. For short haul communication the cost aspect is important , and therefore it is desirable that the optical receiver can be integrated in the same CMOS technology as the rest of the system. If this is possible then ultimately a singe-chip system including optical inputs becomes feasible, eliminating EMC and crosstalk problems, while data rate can be extremely high. The problem of photodiodes in standard CMOS technology it that they have very limited bandwidth, allowing data rates up to only 50Mbit per second. High-speed Photodiodes in Standard CMOS Technology first analyzes the photodiode behaviour and compares existing solutions to enhance the speed. After this, the book introduces a new and robust electronic equalizer technique that makes data rates of 3Gb/s possible, without changing the manufacturing technology. The application of this technique can be found in short haul fibre communication, optical printed circuit boards, but also photodiodes for laser disks.
Download or read book Low Power Low Voltage Sigma Delta Modulators in Nanometer CMOS written by Libin Yao and published by Springer Science & Business Media. This book was released on 2006-02-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: this book is not suitable for the bookstore catalogue
Download or read book All Digital Frequency Synthesizer in Deep Submicron CMOS written by Robert Bogdan Staszewski and published by John Wiley & Sons. This book was released on 2006-09-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new and innovative paradigm for RF frequency synthesis and wireless transmitter design Learn the techniques for designing and implementing an all-digital RF frequency synthesizer. In contrast to traditional RF techniques, this innovative book sets forth digitally intensive design techniques that lead the way to the development of low-cost, low-power, and highly integrated circuits for RF functions in deep submicron CMOS processes. Furthermore, the authors demonstrate how the architecture enables readers to integrate an RF front-end with the digital back-end onto a single silicon die using standard ASIC design flow. Taking a bottom-up approach that progressively builds skills and knowledge, the book begins with an introduction to basic concepts of frequency synthesis and then guides the reader through an all-digital RF frequency synthesizer design: Chapter 2 presents a digitally controlled oscillator (DCO), which is the foundation of a novel architecture, and introduces a time-domain model used for analysis and VHDL simulation Chapter 3 adds a hierarchical layer of arithmetic abstraction to the DCO that makes it easier to operate algorithmically Chapter 4 builds a phase correction mechanism around the DCO such that the system's frequency drift or wander performance matches that of the stable external frequency reference Chapter 5 presents an application of the all-digital RF synthesizer Chapter 6 describes the behavioral modeling and simulation methodology used in design The final chapter presents the implementation of a full transmitter and experimental results. The novel ideas presented here have been implemented and proven in two high-volume, commercial single-chip radios developed at Texas Instruments: Bluetooth and GSM. While the focus of the book is on RF frequency synthesizer design, the techniques can be applied to the design of other digitally assisted analog circuits as well. This book is a must-read for students and engineers who want to learn a new paradigm for RF frequency synthesis and wireless transmitter design using digitally intensive design techniques.
Download or read book CMOS Capacitive Sensors for Lab on Chip Applications written by Ebrahim Ghafar-Zadeh and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1.1 Overview of Lab-on-Chip Laboratory-on-Chip (LoC) is a multidisciplinary approach used for the miniaturization, integration and automation of biological assays or procedures in analytical chemistry [1–3]. Biology and chemistry are experimental sciences that are continuing to evolve and develop new protocols. Each protocol offers step-by-step laboratory instructions, lists of the necessary equipments and required biological and/or chemical substances [4–7]. A biological or chemical laboratory contains various pieces of equipment used for performing such protocols and, as shown in Fig. 1.1, the engineering aspect of LoC design is aiming to embed all these components in a single chip for single-purpose applications. 1.1.1 Main Objectives of LoC Systems Several clear advantages of this technology over conventional approaches, including portability, full automation, ease of operation, low sample consumption and fast assays time, make LoC suitable for many applications including. 1.1.1.1 Highly Throughput Screening To conduct an experiment, a researcher fills a well with the required biological or chemical analytes and keeps the sample in an incubator for some time to allowing the sample to react properly. Afterwards, any changes can be observed using a microscope. In order to quickly conduct millions of biochemical or pharmacolo- cal tests, the researchers will require an automated highly throughput screening (HTS) [8], comprised of a large array of wells, liquid handling devices (e.g., mic- channel, micropump and microvalves [9–11]), a fully controllable incubator and an integrated sensor array, along with the appropriate readout system.
Download or read book CMOS Logic Circuit Design written by John P. Uyemura and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date treatment of the analysis and design of CMOS integrated digital logic circuits. The self-contained book covers all of the important digital circuit design styles found in modern CMOS chips, emphasizing solving design problems using the various logic styles available in CMOS.
Download or read book Design of CMOS RF Integrated Circuits and Systems written by Kiat Seng Yeo and published by World Scientific. This book was released on 2010 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most comprehensive and in-depth coverage of the latest circuit design developments in RF CMOS technology. It is a practical and cutting-edge guide, packed with proven circuit techniques and innovative design methodologies for solving challenging problems associated with RF integrated circuits and systems. This invaluable resource features a collection of the finest design practices that may soon drive the system-on-chip revolution. Using this book's state-of-the-art design techniques, one can apply existing technologies in novel ways and to create new circuit designs for the future.
Download or read book Low Power Digital CMOS Design written by Anantha P. Chandrakasan and published by Springer Science & Business Media. This book was released on 1995-06-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power consumption has become a major design consideration for battery-operated, portable systems as well as high-performance, desktop systems. Strict limitations on power dissipation must be met by the designer while still meeting ever higher computational requirements. A comprehensive approach is thus required at all levels of system design, ranging from algorithms and architectures to the logic styles and the underlying technology. Potentially one of the most important techniques involves combining architecture optimization with voltage scaling, allowing a trade-off between silicon area and low-power operation. Architectural optimization enables supply voltages of the order of 1 V using standard CMOS technology. Several techniques can also be used to minimize the switched capacitance, including representation, optimizing signal correlations, minimizing spurious transitions, optimizing sequencing of operations, activity-driven power down, etc. The high- efficiency of DC-DC converter circuitry required for efficient, low-voltage and low-current level operation is described by Stratakos, Sullivan and Sanders. The application of various low-power techniques to a chip set for multimedia applications shows that orders-of-magnitude reduction in power consumption is possible. The book also features an analysis by Professor Meindl of the fundamental limits of power consumption achievable at all levels of the design hierarchy. Svensson, of ISI, describes emerging adiabatic switching techniques that can break the CV2f barrier and reduce the energy per computation at a fixed voltage. Srivastava, of AT&T, presents the application of aggressive shut-down techniques to microprocessor applications.
Download or read book Advanced Gate Stack Source Drain and Channel Engineering for Si Based CMOS 5 New Materials Processes and Equipment written by V. Narayanan and published by The Electrochemical Society. This book was released on 2009-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ¿ECS Transactions¿ describes processing, materials and equipment for CMOS front-end integration including gate stack, source/drain and channel engineering. Topics include strained Si/SiGe and Si/SiGe on insulator; high-mobility channels including III-V¿s, etc.; nanowires and carbon nanotubes; high-k dielectrics, metal and FUSI gate electrodes; doping/annealing for ultra-shallow junctions; low-resistivity contacts; advanced deposition (e.g. ALD, CVD, MBE), RTP, UV, plasma and laser-assisted processes.
