Download or read book Clay Minerals in Nature written by Marta Valaskova and published by BoD – Books on Demand. This book was released on 2012-09-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay is an abundant raw material which has a variety of uses and properties depending on their structure and composition. Clay minerals are inexpensive and environmentally friendly naturally occurring nanomaterials, thanks to their 1 nm thick silicate layers, in all types of sediments and sedimentary rocks. The book chapters have been classified according to their characteristics in topics and applications. Therefore, in the first section five chapters is dedicated to the characterization and utilization of clay minerals in deposits. The second section includes four chapters about the significance of clay minerals in soils. Third section is devoted to different aspects of clay minerals research, especially to the characterization of structure and modifications for their application.
Download or read book Clay Minerals in Nature Their Characterization Modification and Application written by Gražyna Simha Martynkova and published by . This book was released on 2012 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay is an abundant raw material which has a variety of uses and properties depending on their structure and composition. Clay minerals are inexpensive and environmentally friendly naturally occurring nanomaterials, thanks to their 1 nm thick silicate layers, in all types of sediments and sedimentary rocks. The book chapters have been classified according to their characteristics in topics and applications. Therefore, in the first section five chapters is dedicated to the characterization and utilization of clay minerals in deposits. The second section includes four chapters about the significance of clay minerals in soils. Third section is devoted to different aspects of clay minerals research, especially to the characterization of structure and modifications for their application.
Download or read book Clay Materials for Environmental Remediation written by Suryadi Ismadji and published by Springer. This book was released on 2015-03-24 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of environmental remediation is presented with an emphasis on the role of clay minerals in water purification. In the first chapter, important aspects of environmental problems and possible solutions are discussed. In the second chapter, the application of natural clay minerals as environmental cleaning agents are explained. The discussion is focused on the role of different types of clay materials in hazardous substance removal from air, aqueous solutions, wastewater, aquaculture, ground water, etc. In the next chapter, the modification of clay materials is explored including the preparation of clay composite materials for environmental remediation. Various aspects of clay material modifications and the effects of clay surface chemistry on the removal of hazardous material is also discussed. Next, the equilibrium and kinetics of hazardous substance adsorption is presented. This chapter summarizes recent studies on the removal of hazardous substances from aqueous solutions and the environment using various types of clay minerals. The brief also includes various models used in adsorption studies and touches on the characterization of clay minerals.
Download or read book Current Topics in the Utilization of Clay in Industrial and Medical Applications written by Mansoor Zoveidavianpoor and published by Intechopen. This book was released on 2018 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay and clay minerals have always been used since the ancient times for making ceramic materials and also as a building material. Over the past decades, there has been a growing trend in their applicability in different areas such as industries, environmental remediation and water treatment sectors. The growing trend is mainly associated with the fact that they are chemically and mechanically stable, have higher specific surface area and cation exchange capacity. Furthermore, clays can be modified to improve their functionalities in different sectors. In this chapter, we present a review of the structural, mineralogical and chemical properties of clay and the effect of surface modification in their structures. We further looked at their applicability in arsenic and fluoride removal in their raw and also in their modified form. Although the literature showed that modified clay minerals yields higher adsorption capacity as compared to raw clays little nothing has been reported yet in relation to the cost of modifying clays with chemical species. As such new studies should also elaborate on the cost effectiveness of modifying clay minerals with chemical species.
Download or read book Clays in the Minerals Processing Value Chain written by Markus Gräfe and published by . This book was released on 2017 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clays are increasingly becoming a major problem in the mining, extraction and value-adding processes for a wide range of commodity raw materials. Clays can impact negatively on virtually every unit process within the mining and minerals processing sector, having long-term environmental implications that go well beyond the lifetime of the mining operation. This book is the first to compile, explain and evaluate the effects of clays in the mineral processing value chain, from mining to minerals processing, and finally, tailings disposal. Focusing on topics from the chemistry and rheology of clays to their detection and dissolution behaviour, this book provides comprehensive coverage of the effects on processes such as settling, preg-robing, flotation and comminution. It is an excellent reference for professional mineralogists and geologists, industrial engineers, and researchers interested in clays and clay minerals.
Download or read book Modified Clay and Zeolite Nanocomposite Materials written by Mariano Mercurio and published by Elsevier. This book was released on 2018-11-29 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modified Clay and Zeolite Nanocomposite Materials: Environmental and Pharmaceutical Applications retraces the most important knowledge gaps that the scientific community is facing, including a drawback of real-world applications. This valuable resource explores the novel applications of this group of nanomaterials that can be suitably surface-modified to obtain properties that can be applied in environmental and pharmaceutical fields. For example, modification with surfactants has given new motivation to the study of these materials by producing an inversion in the ion exchange behavior from cationic to anionic. This strategy has paved the way for new uses highlighted in this timely resource. - Explores the combination of both minerals (clay and zeolite) together, with their application in two broad areas of emerging research - Explains better utilization and applications for modified clay and zeolite through detailed comparative studies - Consolidates information on the modification and tuning of clay and zeolite materials for novelty applications - Helps users in the selection of materials, surface features, and other functionalization for diverse applications
Download or read book The Science of Clays written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a comprehensive and coherent description of three widely separated aspects of clays: the science of clays; the industrial uses of clays; and the role of clays in the environment. Most of the existing literature lacks such an integrated study and this work endeavours to fill that gap. An exhaustive account of the science of clays is presented in Part I of the book, which includes the classification, origin and evolution, composition and internal structure, chemical and physical properties of clays; soil mechanics; and analytical techniques for determining clay constituents. Part II provides a comprehensive description of the applications of clays and their derivatives in various industries, while Part III describes the role of clays in the environment; the pollution caused by clay minerals; and the application of clays in order to prevent environmental hazards. A principal feature of the book is its explanation of how the structure and composition of particular clay types facilitate their specific industrial or environmental applications, thus describing the interrelationship between three widely varying aspects of clay. A number of thought-provoking questions are raised at the end of the work in order to leave readers with a better insight in this regard.
Download or read book Natural Microporous Materials in Environmental Technology written by P. Misaelides and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop on the Application of Natural Microporous Materials for Environmental Technology, Smolenice Castle, Slovakia, 26-30 October 1998
Download or read book The Origin of Clay Minerals in Soils and Weathered Rocks written by Bruce B. Velde and published by Springer Science & Business Media. This book was released on 2008-07-18 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of huge relevance in a number of fields, this is a survey of the different processes of soil clay mineral formation and the consequences of these processes concerning the soil ecosystem, especially plant and mineral. Two independent systems form soil materials. The first is the interaction of rocks and water, unstable minerals adjusting to surface conditions. The second is the interaction of the biosphere with clays in the upper parts of alteration profiles.
Download or read book Clay Mineralogy Spectroscopic and Chemical Determinative Methods written by M.H. Repacholi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: A knowledge of clay is important in many spheres of scientific endeav our, particularly in natural sciences such as geology, mineralogy and soil science, but also in more applied areas like environmental and mater ials science. Over the last two decades research into clay mineralogy has been strongly influenced by the development and application of a num ber of spectroscopic techniques which are now able to yield information about clay materials at a level of detail that previously would have seemed inconceivable. This information relates not only to the precise characterization of the individual clay components themselves, but also to the ways in which these components interact with a whole range of absorbate molecules. At present, however, the fruits of this research are to be found principally in a somewhat widely dispersed form in the scientific journals, and it was thus considered to be an appropriate time to bring together a compilation of these spectroscopic techniques in a way which would make them more accessible to the non-specialist. This is the primary aim of this book. The authors of the various chapters first describe the principles and instrumentation of the individual spectro scopic techniques, assuming a minimum of prior knowledge, and then go on to show how these methods have been usefully applied to clay mineralogy in its broadest context.
Download or read book Interstratified Clay Minerals written by Saverio Fiore and published by . This book was released on 2010 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clays Clay Minerals and Ceramic Materials Based on Clay Minerals written by Gustavo Morari Do Nascimento and published by BoD – Books on Demand. This book was released on 2016-03-09 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art results of characterization of clays, clay minerals and ceramic materials based on clay minerals. The main goal of this work is to contribute to the rationalization of some important results obtained in the open area of clays and clay materials characterization. Moreover, this book also provides a comprehensive account on polymer and biopolymer-clay nanocomposites, use of clay as adsorption materials for industrial pollutants, ceramic materials in cultural heritage and physical-chemistry aspects of clay and clay minerals aqueous dispersions. This book will be beneficial for students, teachers and researchers of many areas who are interested to expand their knowledge about clays and its derivates in the fields of Nanotechnology, Biotechnology, Environmental Science, Industrial Remediation, Cultural Heritage, etc.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
Download or read book Radionuclide Behaviour in the Natural Environment written by Christophe Poinssot and published by Elsevier. This book was released on 2012-09-20 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding radionuclide behaviour in the natural environment is essential to the sustainable development of the nuclear industry and key to assessing potential environmental risks reliably. Minimising those risks is essential to enhancing public confidence in nuclear technology. Scientific knowledge in this field has developed greatly over the last decade.Radionuclide behaviour in the natural environment provides a comprehensive overview of the key processes and parameters affecting radionuclide mobility and migration.After an introductory chapter, part one explores radionuclide chemistry in the natural environment, including aquatic chemistry and the impact of natural organic matter and microorganisms. Part two discusses the migration and radioecological behavior of radionuclides. Topics include hydrogeology, sorption and colloidal reactions as well as in-situ investigations. Principles of modelling coupled geochemical, transport and radioecological properties are also discussed. Part three covers application issues: assessment of radionuclide behaviour in contaminated sites, taking Chernobyl as an example, estimation of radiological exposure to the population, performance assessment considerations related to deep geological repositories, and remediation concepts for contaminated sites.With its distinguished editors and international team of expert contributors, Radionuclide behaviour in the natural environment is an essential tool for all those interested or involved in nuclear energy, from researchers, designers and industrial operators to environmental scientists. It also provides a comprehensive guide for academics of all levels in this field. - Provides a comprehensive overview of the key processes and parameters affecting radionuclide mobility and migration - Explores radionuclide chemistry in the natural environment - Discusses the migration and radioecological behaviour of radionuclides
Download or read book Characterization and Applications of Clay as a Novel Material written by Neeraj Kumari and published by Cambridge Scholars Publishing. This book was released on 2023-09-07 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay is an abundant naturally occurring raw material with different unique characteristics such as high surface area, chemical and mechanical stability, cation exchange ability, and more. This book is a comprehensive overview of clay science, covering the characterization and application of clay minerals. Applications such as stratigraphic correlation, environmental deposition indication, pharmaceutical uses, wastewater treatment, construction, and agriculture are explored. This book will provide an important reference for researchers, scientists and engineers who have a keen interest in clay as a sustainable material, solid acid adsorbent, and catalyst.
Download or read book Health and Environmental Safety of Nanomaterials written by James Njuguna and published by Elsevier. This book was released on 2014-02-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health and Environmental Safety of Nanomaterials addresses concerns about the impact of nanomaterials on the environment and human health, and examines the safety of specific nanomaterials. Understanding the unique chemical and physical properties of nanostructures has led to many developments in the applications of nanocomposite materials. While these materials have applications in a huge range of areas, their potential for toxicity must be thoroughly understood. Part one introduces the properties of nanomaterials, nanofillers, and nanocomposites, and questions whether they are more toxic than their bulk counterparts. Part two looks at the release and exposure of nanomaterials. The text covers sampling techniques and data analysis methods used to assess nanoparticle exposure, as well as protocols for testing the safety of polymer nanocomposites. It explains characterization techniques of airborne nanoparticles and life cycle assessment of engineered nanomaterials. Part three focuses on the safety of certain nanomaterials, including nanolayered silicates, carbon nanotubes, and metal oxides. In particular, it explores the potential ecotoxicological hazards associated with the different structures of carbon nanotubes and the safe recycling of inorganic and carbon nanoparticles. The final two chapters address the risks of nanomaterials in fire conditions: their thermal degradation, flammability, and toxicity in different fire scenarios. This is a scientific guide with technical background for professionals using nanomaterials in industry, scientists, academicians, research scholars, and polymer engineers. It also offers a deep understanding of the subject for undergraduate and postgraduate students. - Introduces the properties of nanomaterials, nanofillers, and nanocomposites, and questions whether they are more toxic than their bulk counterparts - Covers sampling techniques and data analysis methods used to assess nanoparticle exposure, as well as protocols for testing the safety of polymer nanocomposites - Explores the potential ecotoxicological hazards associated with the different structures of carbon nanotubes and the safe recycling of inorganic and carbon nanoparticles
Download or read book Nanomaterials from Clay Minerals written by Aiqin Wang and published by Elsevier. This book was released on 2019-08-15 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials from Clay Minerals: A New Approach to Green Functional Materials details the structure, properties and modification of natural nanoscale clay minerals and their application as the green constituent of functional materials. Natural nanomaterials from clay minerals have diverse morphologies, from 1D to 3D, including nanorods, nanofibers, nanotubes, nanosheets and nanopores. These structures show excellent adsorption, reinforcing, supporter, electronic, catalytic and biocompatible properties and are great as sustainable alternatives for toxic or expensive artificial materials. This book provides systematic coverage of clay nanomaterials as eco-friendly resources, emphasizing the importance of such materials in a range of industries, including biomedicine, energy and electronics. This book will provide an important reference for materials scientists and engineers who have an interest in sustainable material development. - Presents systematic coverage of a broad range of nanomaterials from clay minerals, including Kaolinite, Smectite and Halloysite - Depicts use cases for each mineral in a variety of applications, such as drug delivery, agriculture, and in the reinforcement of polymer materials - Provides an overview on the advantages and limitations of nanomaterials from clay minerals, as well as chapters on the future potential of such materials
