Download or read book Classic AmigaOS Programming written by Edwin van den Oosterkamp and published by . This book was released on 2019-11-20 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Commodore Amiga is known for the great capabilities it introduced at the time of its launch. These capabilities were down to the hardware as well as it's graphical pre-emptive multitasking operating system, now usually referred to as the classic AmigaOS. This book provides an introduction into the programming of the classic AmigaOS using C as well as assembly language. It is aimed at programmers who have not programmed for the Amiga before as well as programmers who did this years ago and would like a refresher before diving back in. A general knowledge of computer programming is therefore assumed. The beauty of the classic AmigaOS is that it provides most of the things one would expect of a modern graphical pre-emptive multitasking operating system, but at the same time the OS is lean enough for the programmer to understand what is going on under the hood. The first chapters provide information on setting up programming software on a classic Amiga. The chapter about the 68000 processor will provide an overview of the processor's inner workings and instructions. The chapters about Exec, Intuition, GadTools, ASL, Graphics and Diskfont will explain the usage of these libraries and the functionality they provide. The use of files, directories as well as low-level disk access is detailed in the DOS and Trackdisk chapters.
Download or read book The Art of UNIX Programming written by Eric S. Raymond and published by Addison-Wesley Professional. This book was released on 2003-09-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of UNIX Programming poses the belief that understanding the unwritten UNIX engineering tradition and mastering its design patterns will help programmers of all stripes to become better programmers. This book attempts to capture the engineering wisdom and design philosophy of the UNIX, Linux, and Open Source software development community as it has evolved over the past three decades, and as it is applied today by the most experienced programmers. Eric Raymond offers the next generation of "hackers" the unique opportunity to learn the connection between UNIX philosophy and practice through careful case studies of the very best UNIX/Linux programs.
Download or read book Classic Videogame Hardware Genius Guide written by Imagine Publishing and published by Imagine Publishing. This book was released on with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mastering Amiga Programming Secrets written by Peter Overaa and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spectrum Machine Language for the Absolute Beginner written by William Tang and published by Andrews UK Limited. This book was released on 2022-03-31 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1982, William Tang’s Spectrum Machine Language for the Absolute Beginner is generally considered to be the best introduction to 8-bit machine code programming ever written. With many great game writers crediting this as the book that got them started, there still is no better way to learn the language at the heart of the ZX Spectrum. * * * As the original publisher Melbourne House wrote: If you are frustrated by the limitations of BASIC and want to write faster, more powerful, space-saving programs or subroutines, Spectrum Machine Language for the Absolute Beginner is the book for you. Even with no previous experience of computer languages, you will be able to discover the ease and power of the Spectrum's own language. Each chapter includes specific examples of machine language applications which can be demonstrated and used on your Spectrum as well as a self-test questionnaire. At the end of the book, all this is brought together in an entire machine language program - from design right through to the complete listing of an exciting, original arcade game. * * * Acorn Books is proud to present its Retro Reproduction Series, a collection of classic computing works from the 1980s and 90s, lovingly reproduced in the 21st century. From standards of programming reference no self-respecting microcomputer programmer would be without, to obscure works not found in print anywhere else, these modern reprints are perfect for any connoisseur of retro computing.
Download or read book Amiga Software written by Source Wikipedia and published by University-Press.org. This book was released on 2013-09 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. Pages: 58. Chapters: WordPerfect, Tracker, Video Toaster, AmigaOS 4, Amiga support and maintenance software, Amiga productivity software, ScummVM, Amiga Internet and communications software, Scala, Inc, Amiga programming languages, Deluxe Paint, Magic User Interface, Avid Elastic Reality, Amiga music software, Superbase database, OctaMED, Ultimate Soundtracker, Scalos, AMosaic, Skypix, YAM, Directory Opus, Ixemul.library, Smart File System, TUME, Protracker, VistaPro, Amiexpress, Ambient, WordPerfect 4.1, Brilliance, Professional File System, Trip-a-Tron, CygnusEd, Deluxe Music Construction Set, NComm, TurboPrint, Photogenics, CrossDOS, NoiseTracker, Assampler, BOOPSI, SimpleMail, It's a skull, MainActor, ALynx, XAD, Photon Paint, Excellence, PageStream, Glowicons, TransADF. Excerpt: WordPerfect is a word processing application, now owned by Corel. Bruce Bastian, a Brigham Young University (BYU) graduate student, and BYU computer science professor Dr. Alan Ashton joined forces to design a word processing system for the city of Orem's Data General Corp. minicomputer system in 1979. Bastian and Ashton kept the rights to the WordPerfect software they designed for Orem, deciding to market it through their own company. Ashton and Bastian started Satellite Systems International (SSI) to sell WordPerfect in 1980. WordPerfect 1.0 represented a significant departure from the previous Wang standard for word processing. At the height of its popularity in the early to mid 1980s, it was a dominant player in the word processor market, but has long since been eclipsed in number of users by Microsoft Word. While available in DOS and Microsoft Windows versions, its popularity was based in part on the fact that it was available for a wide variety of computers and operating systems, including Mac OS, Linux, the Apple IIe, a separate version for the...
Download or read book Amiga User Interface Style Guide written by Commodore-Amiga, Inc and published by Addison Wesley Publishing Company. This book was released on 1991 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amiga Assembly Language Programming written by Jake Commander and published by . This book was released on 1987 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the basic concepts of assembly language and how to apply it for use on the Amiga, and includes programming examples and discussions of the Amiga's software and hardware
Download or read book Working Effectively with Legacy Code written by Michael Feathers and published by Prentice Hall Professional. This book was released on 2004-09-22 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get more out of your legacy systems: more performance, functionality, reliability, and manageability Is your code easy to change? Can you get nearly instantaneous feedback when you do change it? Do you understand it? If the answer to any of these questions is no, you have legacy code, and it is draining time and money away from your development efforts. In this book, Michael Feathers offers start-to-finish strategies for working more effectively with large, untested legacy code bases. This book draws on material Michael created for his renowned Object Mentor seminars: techniques Michael has used in mentoring to help hundreds of developers, technical managers, and testers bring their legacy systems under control. The topics covered include Understanding the mechanics of software change: adding features, fixing bugs, improving design, optimizing performance Getting legacy code into a test harness Writing tests that protect you against introducing new problems Techniques that can be used with any language or platform—with examples in Java, C++, C, and C# Accurately identifying where code changes need to be made Coping with legacy systems that aren't object-oriented Handling applications that don't seem to have any structure This book also includes a catalog of twenty-four dependency-breaking techniques that help you work with program elements in isolation and make safer changes.
Download or read book Encyclopedia of Graphics File Formats written by James D. Murray and published by O'Reilly Media. This book was released on 1994 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computing Methodologies -- Computer Graphics.
Download or read book Vintage Commodore 128 Personal Computer Handbook 2019 Survival Edition written by Margaret Gorts Morabito and published by Independently Published. This book was released on 2019-03-12 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Vintage Commodore 128 Personal Computer Handbook is written in easy to understand, non-technical language, to help answer your questions about the C-128. Aimed specifically at present day users, this book will teach you how to use and equip your vintage C-128, even if you don't have the original peripherals and software disks. Practical hands-on information is included, such as how to set up the computer, how to access and use the three operating systems, how to set up and use certain modern peripherals such as the SD2IEC, how to go online through Ethernet or by wireless or with a traditional modem. Also included are technical specifications, an introduction to BASIC 7.0, how to use CP/M, maintenance, troubleshooting, repair services, where to get modern day peripherals, where to look for sources of information on hardware, software, support, and communication with other Commodore computer users, among other topics of interest and need. This will be one of your main C-128 reference books, one that you will come back to again and again
Download or read book Amiga ROM Kernel Reference Manual written by Commodore-Amiga, Inc and published by Addison Wesley Publishing Company. This book was released on 1992 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books in this series cover the newest Amiga computer, the Amiga 3000, as well as the most recent version of the system software, Release 2. In Release 2, the system libraries have doubled. This comprehensive tutorial provides detailed examples of how to use the Amiga system libraries, including hundreds of new functions.
Download or read book Rexx Programmer s Reference written by Howard Fosdick and published by John Wiley & Sons. This book was released on 2005-03-11 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;Whether you're new to Rexx or are an experienced Rexx programmer, this comprehensive reference offers you what you need to know in order to work with this easy yet powerful scripting language on any level. After a quick overview of the basics of Rexx, you'll move on to more advanced scripting topics such as portable code and optimal coding style.". "This book is for programmers on any platform who are either looking to learn Rexx or already use it and want to expand their knowledge of Rexx. A basic knowledge of programming is assumed."--BOOK JACKET.
Download or read book Blitz BASIC for the Amiga written by Neil Wright and published by Sigma Press. This book was released on 1995-10 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to 68000 Assembly Language written by R. A. Penfold and published by Bernard Babani Publishing. This book was released on 1986 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: A vast increase in running speed can be obtained when using programs written in assembly language, which in essence entails direct programming of the computer without using a high level built-in language such as BASIC. However, this can only be undertaken by someone who has a reasonable understanding of the microprocessor and some of the other hardware used in the computer, but it is not as difficult as one might think and this book tells the story
Download or read book Total Amiga Assembler written by Paul Andreas Overaa and published by . This book was released on 1995 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amiga Hardware Reference Manual written by Commodore-Amiga, Inc and published by Addison Wesley Publishing Company. This book was released on 1989 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: