Download or read book Finite Element Methods in Civil and Mechanical Engineering written by Arzhang Angoshtari and published by CRC Press. This book was released on 2020-12-09 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method is widely employed for numerical simulations in engineering and science due to its accuracy and efficiency. This concise introduction to the mathematical theory of the finite element method presents a selection of applications in civil and mechanical engineering including beams, elastic membranes, the wave equation, heat transfer, seepage in embankment, soil consolidation, incompressible fluids, and linear elasticity. Jupyter notebooks containing all Python programs of each chapter can be downloaded from the book's companion website. Arzhang Angoshtari is an assistant professor and Ali Gerami Matin is a graduate student, both in the department of Civil and Environmental Engineering at the George Washington University, USA. Their research interests cover theoretical and computational mechanics and finite element methods.
Download or read book Engineering Mechanics of Solids written by Louis L. Bucciarelli and published by . This book was released on 1994 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Groundwater and Seepage written by Milton E. Harr and published by Courier Corporation. This book was released on 2012-12-04 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The movement of groundwater is a basic part of soil mechanics. It is an important part of almost every area of civil engineering, agronomy, geology, irrigation, and reclamation. Moreover, the logical structure of its theory appeals to engineering scientists and applied mathematicians. This book aims primarily at providing the engineer with an organized and analytical approach to the solutions of seepage problems and an understanding of the design and analysis of earth structures that impound water. It can be used for advanced courses in civil, hydraulic, agricultural, and foundation engineering, and will prove useful to consulting engineers — or any public or private agency responsible for building or maintaining water storage or control systems. Among the special features of this book are its coverage of previously unavailable Russian work in the field, an extensive appendix of concepts in advanced engineering mathematics needed to deal with physical flow systems, and numerous completely worked-out and solved examples coupled with over 200 problems of varying difficulty.
Download or read book Basic civil and mechanical engineering written by G. Shanmugam and published by . This book was released on 2000 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Chemical Reaction Engineering written by Mark E. Davis and published by Courier Corporation. This book was released on 2013-05-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Appropriate for a one-semester undergraduate or first-year graduate course, this text introduces the quantitative treatment of chemical reaction engineering. It covers both homogeneous and heterogeneous reacting systems and examines chemical reaction engineering as well as chemical reactor engineering. Each chapter contains numerous worked-out problems and real-world vignettes involving commercial applications, a feature widely praised by reviewers and teachers. 2003 edition.
Download or read book Introduction to Continuum Mechanics for Engineers written by Ray M. Bowen and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained graduate-level text introduces classical continuum models within a modern framework. Its numerous exercises illustrate the governing principles, linearizations, and other approximations that constitute classical continuum models. Starting with an overview of one-dimensional continuum mechanics, the text advances to examinations of the kinematics of motion, the governing equations of balance, and the entropy inequality for a continuum. The main portion of the book involves models of material behavior and presents complete formulations of various general continuum models. The final chapter contains an introductory discussion of materials with internal state variables. Two substantial appendixes cover all of the mathematical background necessary to understand the text as well as results of representation theorems. Suitable for independent study, this volume features 280 exercises and 170 references.
Download or read book Engineering Magnetohydrodynamics written by George W. Sutton and published by Courier Dover Publications. This book was released on 2006-07-07 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for advanced undergraduates and graduate students in engineering, this text introduces the concepts of plasma physics and magnetohydrodynamics from a physical viewpoint. The first section of the three-part treatment deals mainly with the properties of ionized gases in magnetic and electric fields, essentially following the microscopic viewpoint. An introduction surveys the concepts of ionized gases and plasmas, together with a variety of magnetohydrodynamic regimes. A review of electromagnetic field theory follows, including motion of an individual charged particle and derivations of drift motions and adiabatic invariants. Additional topics include kinetic theory, derivation of electrical conductivity, development of statistical mechanics, radiation from plasma, and plasma wave motion. Part II addresses the macroscopic motion of electrically conducting compressible fluids: magnetohydrodynamic approximations; description of macroscopic fluid motions; magnetohydrodynamic channel flow; methods of estimating channel-flow behavior; and treatment of magnetohydrodynamic boundary layers. Part III draws upon the material developed in previous sections to explore applications of magnetohydrodynamics. The text concludes with a series of problems that reinforce the teachings of all three parts.
Download or read book Stability Theory and Its Applications to Structural Mechanics written by Clive L. Dym and published by Courier Dover Publications. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integration of modern work in structural stability theory, this volume focuses on the Koiter postbuckling analyses, with mathematical notions of stability of motion. In relation to discrete and continuous systems, it bases the minimum energy principles for static stability upon the dynamic concepts of stability of motion. It further develops the asymptotic buckling and postbuckling analyses from potential energy considerations, with applications to columns, plates, and arches.
Download or read book Analytical Fracture Mechanics written by David J. Unger and published by Courier Corporation. This book was released on 2012-06-08 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Analytical Fracture Mechanics should prove to be a valuable resource to both the new student and the experienced researcher in fracture mechanics. It is recommended." — Applied Mechanics Review One of the central concerns of engineering is the failure of materials. Addressing this concern, fracture mechanics — an interdisciplinary subject spanning mechanical, civil, and materials engineering, applied mathematics, and physics — predicts the conditions under which such failure will occur due to crack growth. This valuable self-contained text by an expert in the field supplements standard fracture mechanics texts by focusing on analytical methods for determining crack-tip stress and strain fields. Following a comprehensive 120-page introduction — which provides all the background necessary for understanding the remaining chapters — the book is organized around a series of elastoplastic and hydrogen-assisted crack-tip problems and their solutions. The first chapter presents the only proven solution technique for the second order nonlinear partial differential equation governing a mode I elastoplastic crack problem. Other chapters deal with plastic zone transitions, environmental cracking, and small-scale yielding versus exact linear elastic solutions. One of the excellent features of this book is the clarity with which groups of problems are presented and related to each other. Another is the careful attention it gives to the various modes of fracture (I, II, and III) and to showing the circumstances under which information from a solution for one mode may be used to infer information in another mode. For this edition, the author has added a new appendix, "Stress Across an Elastoplastic Boundary of a Mode I Crack: Parabolic to Hyperbolic Plasticity Transition."
Download or read book Advanced Strength of Materials written by J. P. Den Hartog and published by Courier Corporation. This book was released on 2014-07-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Four decades ago, J.P. Den Hartog, then Professor of Mechanical Engineering at Massachusetts Institute of Technology, wrote Strength of Materials, an elementary text that still enjoys great popularity in engineering schools throughout the world. Widely used as a classroom resource, it has also become a favorite reference and refresher on the subject among engineers everywhere. This is the first paperback edition of an equally successful text by this highly respected engineer and author. Advanced Strength of Materials takes this important subject into areas of greater difficulty, masterfully bridging its elementary aspects and its most formidable advanced reaches. The book reflects Den Hartog's impressive talent for making lively, discursive and often witty presentations of his subject, and his unique ability to combine the scholarly insight of a distinguished scientist with the practical, problem-solving orientation of an experienced industrial engineer. The concepts here explored in depth include torsion, rotating disks, membrane stresses in shells, bending of flat plates, beams on elastic foundation, the two-dimensional theory of elasticity, the energy method and buckling. The presentation is aimed at the student who has a one-semester course in elementary strength of materials. The book includes an especially thorough and valuable section of problems and answers which give both students and professionals practice in techniques and clear illustrations of applications.
Download or read book A History and Philosophy of Fluid Mechanics written by G. A. Tokaty and published by Courier Corporation. This book was released on 2013-02-20 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through the centuries, the intricacies of fluid mechanics — the study of the laws of motion and fluids in motion — have occupied many of history's greatest minds. In this pioneering account, a distinguished aeronautical scientist presents a history of fluid mechanics focusing on the achievements of the pioneering scientists and thinkers whose inspirations and experiments lay behind the evolution of such disparate devices as irrigation lifts, ocean liners, windmills, fireworks and spacecraft. The author first presents the basics of fluid mechanics, then explores the advances made through the work of such gifted thinkers as Plato, Aristotle, da Vinci, Galileo, Pascal, Newton, Bernoulli, Euler, Lagrange, Ernst Mach and other scientists of the 20th century. Especially important for its illuminating comparison of the development of fluid mechanics in the former Soviet Union with that in the West, the book concludes with studies of transsonic compressibility and aerodynamics, supersonic fluid mechanics, hypersonic gas dynamics and the universal matter-energy continuity. Professor G. A. Tokaty has headed the prestigious Aeronautical Research Laboratory at the Zhukovsky Academy of Aeronautics in Moscow, and has taught at the University of California, Los Angeles. He is Emeritus Professor of Aeronautics and Space Technology, The City University, London.
Download or read book Mechanical Vibrations written by J. P. Den Hartog and published by Courier Corporation. This book was released on 2013-02-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text combines the scholarly insights of its distinguished author with the practical, problem-solving orientation of an experienced industrial engineer. Abundant examples and figures, plus 233 problems and answers. 1956 edition.
Download or read book Dynamics written by Lawrence E. Goodman and published by Courier Corporation. This book was released on 2013-02-13 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning text presents complete theoretical treatment of mechanical model systems and deals with technological applications. Topics include introduction to calculus of vectors, particle motion, dynamics of particle systems and plane rigid bodies, technical applications in plane motions, theory of mechanical vibrations, and more. Exercises and answers appear in each chapter.
Download or read book Introduction to Differential Geometry for Engineers written by Brian F. Doolin and published by Courier Corporation. This book was released on 2013-05-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outstanding guide supplies important mathematical tools for diverse engineering applications, offering engineers the basic concepts and terminology of modern global differential geometry. Suitable for independent study as well as a supplementary text for advanced undergraduate and graduate courses, this volume also constitutes a valuable reference for control, systems, aeronautical, electrical, and mechanical engineers.The treatment's ideas are applied mainly as an introduction to the Lie theory of differential equations and to examine the role of Grassmannians in control systems analysis. Additional topics include the fundamental notions of manifolds, tangent spaces, vector fields, exterior algebra, and Lie algebras. An appendix reviews concepts related to vector calculus, including open and closed sets, compactness, continuity, and derivative.
Download or read book Random Vibration and Statistical Linearization written by John Brian Roberts and published by Courier Corporation. This book was released on 2003-12-09 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained volume explains the general method of statistical linearization and its use in solving random vibration problems. Numerous examples show advanced undergraduate and graduate students many practical applications. 1990 edition.
Download or read book Plant Project Engineering Guidebook for Mechanical and Civil Engineers written by Morley H. Selver and published by . This book was released on 2004-12 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the definitive guide to Plant Project Engineering.It is for engineers, technologists, and others responsible for managing the design and construction of projects; and others new to the field of project engineering. This book will help you get an understanding of what is involved in managing design and construction projects. This understanding will save you time, money, and effort in organizing and managing your projects.This easy-to-follow guide, written by a professional engineer, will improve you understanding of all the aspects invloved in how projects are developed, managed, constructed, commissioned, and started-up. This understanding will help you develop and manage your projects with confidence.
Download or read book Basic of Civil and Mechanical Engineering written by Navy Feroz and published by Independently Published. This book was released on 2019-08-31 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: $$$ Get the Kindle version free along with the paperback version$$$ This book cover the syllabus for the Engineering part of the Basic Civil and Mechanical Engineering course. It will helpful for the Engineering student to gain the basic knowledge in all aspects. This book is presented in a simple and comprehensive manner. Diagrams are also included in the chapters to explain the concepts. This textbook has been designed to provide students with a strong foundation in both subjects. This book has been written in a simple and comprehensive manner to enable students to derive maximum understanding. Throughout the text an attempt has been made to present the subject matter in a simple and precious manner. Also, the question bank has been included at the end of the book.
