Download or read book Circuits and Systems Advances in Near Threshold Computing written by Sanghamitra Roy and published by MDPI. This book was released on 2021-05-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing.

Download or read book Circuits and Systems Advances in Near Threshold Computing written by Sanghamitra Roy and published by . This book was released on 2021 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing.

Download or read book Near Threshold Computing written by Michael Hübner and published by Springer. This book was released on 2015-11-14 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores near-threshold computing (NTC), a design-space using techniques to run digital chips (processors) near the lowest possible voltage. Readers will be enabled with specific techniques to design chips that are extremely robust; tolerating variability and resilient against errors. Variability-aware voltage and frequency allocation schemes will be presented that will provide performance guarantees, when moving toward near-threshold manycore chips. · Provides an introduction to near-threshold computing, enabling reader with a variety of tools to face the challenges of the power/utilization wall; · Demonstrates how to design efficient voltage regulation, so that each region of the chip can operate at the most efficient voltage and frequency point; · Investigates how performance guarantees can be ensured when moving towards NTC manycores through variability-aware voltage and frequency allocation schemes.

Download or read book Special Issue on Advances in Design of Ultra low Power Circuits and Systems in Emerging Technologies written by Aida Todri-Sanial and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Memristor Based Nanoelectronic Computing Circuits and Architectures written by Ioannis Vourkas and published by Springer. This book was released on 2015-08-26 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the design and development of nanoelectronic computing circuits, systems and architectures focusing particularly on memristors, which represent one of today’s latest technology breakthroughs in nanoelectronics. The book studies, explores, and addresses the related challenges and proposes solutions for the smooth transition from conventional circuit technologies to emerging computing memristive nanotechnologies. Its content spans from fundamental device modeling to emerging storage system architectures and novel circuit design methodologies, targeting advanced non-conventional analog/digital massively parallel computational structures. Several new results on memristor modeling, memristive interconnections, logic circuit design, memory circuit architectures, computer arithmetic systems, simulation software tools, and applications of memristors in computing are presented. High-density memristive data storage combined with memristive circuit-design paradigms and computational tools applied to solve NP-hard artificial intelligence problems, as well as memristive arithmetic-logic units, certainly pave the way for a very promising memristive era in future electronic systems. Furthermore, these graph-based NP-hard problems are solved on memristive networks, and coupled with Cellular Automata (CA)-inspired computational schemes that enable computation within memory. All chapters are written in an accessible manner and are lavishly illustrated. The book constitutes an informative cornerstone for young scientists and a comprehensive reference to the experienced reader, hoping to stimulate further research on memristive devices, circuits, and systems.

Download or read book Adaptive Digital Circuits for Power Performance Range beyond Wide Voltage Scaling written by Saurabh Jain and published by Springer Nature. This book was released on 2020-02-27 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive coverage of digital design techniques to expand the power-performance tradeoff well beyond that allowed by conventional wide voltage scaling. Compared to conventional fixed designs, the approach described in this book makes digital circuits more versatile and adaptive, allowing simultaneous optimization at both ends of the power-performance spectrum. Drop-in solutions for fully automated and low-effort design based on commercial CAD tools are discussed extensively for processors, accelerators and on-chip memories, and are applicable to prominent applications (e.g., IoT, AI, wearables, biomedical). Through the higher power-performance versatility techniques described in this book, readers are enabled to reduce the design effort through reuse of the same digital design instance, across a wide range of applications. All concepts the authors discuss are demonstrated by dedicated testchip designs and experimental results. To make the results immediately usable by the reader, all the scripts necessary to create automated design flows based on commercial tools are provided and explained.

Download or read book A Survey of Architectural Techniques for Near Threshold Computing written by and published by . This book was released on 2015 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy efficiency has now become the primary obstacle in scaling the performance of all classes of computing systems. In low-voltage computing and specifically, near-threshold voltage computing (NTC), which involves operating the transistor very close to and yet above its threshold voltage, holds the promise of providing many-fold improvement in energy efficiency. However, use of NTC also presents several challenges such as increased parametric variation, failure rate and performance loss etc. Our paper surveys several re- cent techniques which aim to offset these challenges for fully leveraging the potential of NTC. By classifying these techniques along several dimensions, we also highlight their similarities and differences. Ultimately, we hope that this paper will provide insights into state-of-art NTC techniques to researchers and system-designers and inspire further research in this field.

Download or read book Advanced Computing and Communication Technologies written by Ramesh K Choudhary and published by Springer. This book was released on 2016-06-09 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a collection of high-quality peer-reviewed research papers presented at the Ninth International Conference on Advanced Computing & Communication Technologies (ICACCT-2015) held at Asia Pacific Institute of Information Technology, Panipat, India during 27–29 November 2015. The book discusses a wide variety of industrial, engineering and scientific applications of the emerging techniques. Researchers from academia and industry present their original work and exchange ideas, information, techniques and applications in the field of Advanced Computing and Communication Technology.

Download or read book Emerging Computing From Devices to Systems written by Mohamed M. Sabry Aly and published by Springer Nature. This book was released on 2022-07-11 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers a range of topics dealing with emerging computing technologies which are being developed in response to challenges faced due to scaling CMOS technologies. It provides a sneak peek into the capabilities unleashed by these technologies across the complete system stack, with contributions by experts discussing device technology, circuit, architecture and design automation flows. Presenting a gradual progression of the individual sub-domains and the open research and adoption challenges, this book will be of interest to industry and academic researchers, technocrats and policymakers. Chapters "Innovative Memory Architectures Using Functionality Enhanced Devices" and "Intelligent Edge Biomedical Sensors in the Internet of Things (IoT) Era" are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Advances in Computing Communication Automation and Biomedical Technology written by M. G. Sumithra and published by IJAICT India Publications . This book was released on 2020-12-30 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Computing, Communication, Automation and Biomedical Technology aims to bring together leading academic, scientists, researchers, industry representatives, postdoctoral fellows and research scholars around the world to share their knowledge and research expertise, to advances in the areas of Computing, Communication, Electrical, Civil, Mechanical and Biomedical Systems as well as to create a prospective collaboration and networking on various areas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered, and solutions adopted in the fields of innovation.

Download or read book Progress in VLSI Design and Test written by Hafizur Rahaman and published by Springer. This book was released on 2012-06-26 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International Symposium on VSLI Design and Test, VDAT 2012, held in Shibpur, India, in July 2012. The 30 revised regular papers presented together with 10 short papers and 13 poster sessions were carefully selected from 135 submissions. The papers are organized in topical sections on VLSI design, design and modeling of digital circuits and systems, testing and verification, design for testability, testing memories and regular logic arrays, embedded systems: hardware/software co-design and verification, emerging technology: nanoscale computing and nanotechnology.

Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Cristina Silvano and published by Springer Nature. This book was released on 2023-12-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 22st International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2021, which took place in July 2022 in Samos, Greece. The 11 full papers and 7 short papers presented in this volume were carefully reviewed and selected from 45 submissions. The conference covers a wide range of embedded systems design aspects, including machine learning accelerators, and power management and programmable dataflow systems.

Download or read book Soft Computing in Materials Development and its Sustainability in the Manufacturing Sector written by Amar Patnaik and published by CRC Press. This book was released on 2022-08-19 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the application of soft computing in materials and manufacturing sectors with the objective to offer an intelligent approach to improve the manufacturing process, material selection and characterization techniques for developing advanced new materials. It unveils different models and soft computing techniques applicable in the field of advanced materials and solves the problems to help the industry and scientists to develop sustainable materials for all purposes. The book focuses on the overall well-being of the environment for better sustenance and livelihood. Firstly, the authors discuss the implementation of soft computing in the various areas of engineering materials. They also review the latest intelligent technologies and algorithms related to the state-of-the-art methodologies of monitoring and effective implementation of sustainable engineering practices. Finally the authors examine the future generation of sustainable and intelligent monitoring techniques beneficial for manufacturing, and cover novel soft computing techniques for the purpose of effective manufacturing processes at par with the standards laid down by the International Standards of Organization (ISO). This book is intended for academics and researchers from all the fields of engineering interested in joining interdisciplinary initiatives on soft computing techniques for advanced materials and manufacturing.

Download or read book An Event Driven Parallel Processing Subsystem for Energy Efficient Mobile Medical Instrumentation written by Florian Stefan Glaser and published by BoD – Books on Demand. This book was released on 2022-12-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aging population and the thereby ever-rising cost of health services call for novel and innovative solutions for providing medical care and services. So far, medical care is primarily provided in the form of time-consuming in-person appointments with trained personnel and expensive, stationary instrumentation equipment. As for many current and past challenges, the advances in microelectronics are a crucial enabler and offer a plethora of opportunities. With key building blocks such as sensing, processing, and communication systems and circuits getting smaller, cheaper, and more energy-efficient, personal and wearable or even implantable point-of-care devices with medicalgrade instrumentation capabilities become feasible. Device size and battery lifetime are paramount for the realization of such devices. Besides integrating the required functionality into as few individual microelectronic components as possible, the energy efficiency of such is crucial to reduce battery size, usually being the dominant contributor to overall device size. In this thesis, we present two major contributions to achieve the discussed goals in the context of miniaturized medical instrumentation: First, we present a synchronization solution for embedded, parallel near-threshold computing (NTC), a promising concept for enabling the required processing capabilities with an energy efficiency that is suitable for highly mobile devices with very limited battery capacity. Our proposed solution aims at increasing energy efficiency and performance for parallel NTC clusters by maximizing the effective utilization of the available cores under parallel workloads. We describe a hardware unit that enables fine-grain parallelization by greatly optimizing and accelerating core-to-core synchronization and communication and analyze the impact of those mechanisms on the overall performance and energy efficiency of an eight-core cluster. With a range of digital signal processing (DSP) applications typical for the targeted systems, the proposed hardware unit improves performance by up to 92% and 23% on average and energy efficiency by up to 98% and 39% on average. In the second part, we present a MCU processing and control subsystem (MPCS) for the integration into VivoSoC, a highly versatile single-chip solution for mobile medical instrumentation. In addition to the MPCS, it includes a multitude of analog front-ends (AFEs) and a multi-channel power management IC (PMIC) for voltage conversion. ...

Download or read book Enabling the Internet of Things written by Massimo Alioto and published by Springer. This book was released on 2017-01-23 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first comprehensive view on integrated circuit and system design for the Internet of Things (IoT), and in particular for the tiny nodes at its edge. The authors provide a fresh perspective on how the IoT will evolve based on recent and foreseeable trends in the semiconductor industry, highlighting the key challenges, as well as the opportunities for circuit and system innovation to address them. This book describes what the IoT really means from the design point of view, and how the constraints imposed by applications translate into integrated circuit requirements and design guidelines. Chapter contributions equally come from industry and academia. After providing a system perspective on IoT nodes, this book focuses on state-of-the-art design techniques for IoT applications, encompassing the fundamental sub-systems encountered in Systems on Chip for IoT: ultra-low power digital architectures and circuits low- and zero-leakage memories (including emerging technologies) circuits for hardware security and authentication System on Chip design methodologies on-chip power management and energy harvesting ultra-low power analog interfaces and analog-digital conversion short-range radios miniaturized battery technologies packaging and assembly of IoT integrated systems (on silicon and non-silicon substrates). As a common thread, all chapters conclude with a prospective view on the foreseeable evolution of the related technologies for IoT. The concepts developed throughout the book are exemplified by two IoT node system demonstrations from industry. The unique balance between breadth and depth of this book: enables expert readers quickly to develop an understanding of the specific challenges and state-of-the-art solutions for IoT, as well as their evolution in the foreseeable future provides non-experts with a comprehensive introduction to integrated circuit design for IoT, and serves as an excellent starting point for further learning, thanks to the broad coverage of topics and selected references makes it very well suited for practicing engineers and scientists working in the hardware and chip design for IoT, and as textbook for senior undergraduate, graduate and postgraduate students ( familiar with analog and digital circuits).

Download or read book Selected Topics in Intelligent Chips with Emerging Devices Circuits and Systems written by Alex James and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Memristors have provided a new direction of thinking for circuit designers to overcome the limits of scalability and for thinking of building systems beyond Moore0́9s law. Over the last decade, there has been a significant number of innovations in using memristors for building neural networks through analog computing, in-memory computing, and stochastic computing approaches. The emergence of intelligent integrated circuits is inevitable for the future of integrated circuit applications. This book provides a collection of talks conducted as part of the IEEE Seasonal School on Circuits and System, having a focus on Intelligence in Chip: Tomorrow of Integrated Circuits. Technical topics discussed in the book include: 0́Ø Edge of Chaos Theory Explains Complex Phenomena in Memristor Circuits 0́Ø Analog Memristive Computing 0́Ø Designing energy efficient neo-cortex system with on-device learning 0́Ø Integrated sensors 0́Ø Challenges and recent advances in NVM based Neuromorphic Computing ICs 0́Ø In-memory Computing (for deep learning) 0́Ø Deep learning with Spiking Neural Networks 0́Ø Computational Intelligence for Designing Integrated Circuits and Systems 0́Ø Neurochip Design, Modeling, and Applications.

Download or read book Low Power Designs in Nanodevices and Circuits for Emerging Applications written by Shilpi Birla and published by CRC Press. This book was released on 2023-11-14 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference textbook discusses low power designs for emerging applications. This book focuses on the research challenges associated with theory, design, and applications towards emerging Microelectronics and VLSI device design and developments, about low power consumptions. The advancements in large-scale integration technologies are principally responsible for the growth of the electronics industry. This book is focused on senior undergraduates, graduate students, and professionals in the field of electrical and electronics engineering, nanotechnology. This book: Discusses various low power techniques and applications for designing efficient circuits Covers advance nanodevices such as FinFETs, TFETs, CNTFETs Covers various emerging areas like Quantum-Dot Cellular Automata Circuits and FPGAs and sensors Discusses applications like memory design for low power applications using nanodevices The number of options for ICs in control applications, telecommunications, high-performance computing, and consumer electronics continues to grow with the emergence of VLSI designs. Nanodevices have revolutionized the electronics market and human life; it has impacted individual life to make it more convenient. They are ruling every sector such as electronics, energy, biomedicine, food, environment, and communication. This book discusses various emerging low power applications using CMOS and other emerging nanodevices.