Download or read book Top Down Design of High Performance Sigma Delta Modulators written by Fernando Medeiro and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest for :I:~ modulation-based NO converters has significantly increased in the last years. The reason for that is twofold. On the one hand, unlike other converters that need accurate building blocks to obtain high res olution, :I:~ converters show low sensitivity to the imperfections of their building blocks. This is achieved through extensive use of digital signal pro cessing - a desirable feature regarding the implementation of NO interfaces in mainstream CMOS technologies which are better suited for implementing fast, dense, digital circuits than accurate analog circuits. On the other hand, the number of applications with industrial interest has also grown. In fact, starting from the earliest in the audio band, today we can find :I:~ converters in a large variety of NO interfaces, ranging from instrumentation to commu nications. These advances have been supported by a number of research works that have lead to a considerably large amount of published papers and books cov ering different sub-topics: from purely theoretical aspects to architecture and circuit optimization. However, so much material is often difficultly digested by those unexperienced designers who have been committed to developing a :I:~ converter, mainly because there is a lack of methodology. In our view, a clear methodology is necessary in :I:~ modulator design because all related tasks are rather hard.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 23 (thesis year 1978) a total of 10,148 theses titles from 27 Canadian and 220 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 23 reports these submitted in 1978, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Look Ahead Based Sigma Delta Modulation written by Erwin Janssen and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to expand and improve upon the existing knowledge on discrete-time 1-bit look-ahead sigma-delta modulation in general, and to come to a solution for the above mentioned specific issues arising from 1-bit sigma-delta modulation for SA-CD. In order to achieve this objective an analysis is made of the possibilities for improving the performance of digital noise-shaping look-ahead solutions. On the basis of the insights obtained from the analysis, several novel generic 1-bit look-ahead solutions that improve upon the state-of-the-art will be derived and their performance will be evaluated and compared. Finally, all the insights are combined with the knowledge of the SA-CD lossless data compression algorithm to come to a specifically for SA-CD optimized look-ahead design.
Download or read book The Design of Low Voltage Low Power Sigma Delta Modulators written by Shahriar Rabii and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oversampling techniques based on sigma-delta modulation are widely used to implement the analog/digital interfaces in CMOS VLSI technologies. This approach is relatively insensitive to imperfections in the manufacturing process and offers numerous advantages for the realization of high-resolution analog-to-digital (A/D) converters in the low-voltage environment that is increasingly demanded by advanced VLSI technologies and by portable electronic systems. In The Design of Low-Voltage, Low-Power Sigma-Delta Modulators, an analysis of power dissipation in sigma-delta modulators is presented, and a low-voltage implementation of a digital-audio performance A/D converter based on the results of this analysis is described. Although significant power savings can typically be achieved in digital circuits by reducing the power supply voltage, the power dissipation in analog circuits actually tends to increase with decreasing supply voltages. Oversampling architectures are a potentially power-efficient means of implementing high-resolution A/D converters because they reduce the number and complexity of the analog circuits in comparison with Nyquist-rate converters. In fact, it is shown that the power dissipation of a sigma-delta modulator can approach that of a single integrator with the resolution and bandwidth required for a given application. In this research the influence of various parameters on the power dissipation of the modulator has been evaluated and strategies for the design of a power-efficient implementation have been identified. The Design of Low-Voltage, Low-Power Sigma-Delta Modulators begins with an overview of A/D conversion, emphasizing sigma-delta modulators. It includes a detailed analysis of noise in sigma-delta modulators, analyzes power dissipation in integrator circuits, and addresses practical issues in the circuit design and testing of a high-resolution modulator. The Design of Low-Voltage, Low-Power Sigma-Delta Modulators will be of interest to practicing engineers and researchers in the areas of mixed-signal and analog integrated circuit design.
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Bandpass Sigma Delta Modulators written by Jurgen van Engelen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sigma delta modulation has become a very useful and widely applied technique for high performance Analog-to-Digital (A/D) conversion of narrow band signals. Through the use of oversampling and negative feedback, the quantization errors of a coarse quantizer are suppressed in a narrow signal band in the output of the modulator. Bandpass sigma delta modulation is well suited for A/D conversion of narrow band signals modulated on a carrier, as occurs in communication systems such as AM/FM receivers and mobile phones. Due to the nonlinearity of the quantizer in the feedback loop, a sigma delta modulator may exhibit input signal dependent stability properties. The same combination of the nonlinearity and the feedback loop complicates the stability analysis. In Bandpass Sigma Delta Modulators, the describing function method is used to analyze the stability of the sigma delta modulator. The linear gain model commonly used for the quantizer fails to predict small signal stability properties and idle patterns accurately. In Bandpass Sigma Delta Modulators an improved model for the quantizer is introduced, extending the linear gain model with a phase shift. Analysis shows that the phase shift of a sampled quantizer is in fact a phase uncertainty. Stability analysis of sigma delta modulators using the extended model allows accurate prediction of idle patterns and calculation of small-signal stability boundaries for loop filter parameters. A simplified rule of thumb is derived and applied to bandpass sigma delta modulators. The stability properties have a considerable impact on the design of single-loop, one-bit, high-order continuous-time bandpass sigma delta modulators. The continuous-time bandpass loop filter structure should have sufficient degrees of freedom to implement the desired (small-signal stable) sigma delta modulator behavior. Bandpass Sigma Delta Modulators will be of interest to practicing engineers and researchers in the areas of mixed-signal and analog integrated circuit design.
Download or read book Oversampling Delta Sigma Data Converters written by James C. Candy and published by University of Texas Press. This book was released on 1992 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This now famous anthology brings together various aspects of oversampling methods and compares and evaluates design approaches. It describes the theoretical analysis of converter performances, the actual design of converters and their simulation, circuit implementations, and applications.
Download or read book Circuits and Systems Based on Delta Modulation written by Djuro G. Zrilic and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for students and professionals who are interested in the field of digital signal processing of delta-sigma modulated sequences. The overall focus is on the development of algorithms and circuits for linear, non-linear, and mixed mode processing of delta-sigma modulated pulse streams. The material presented here is directly relevant to applications in digital communication, DSP, instrumentation, and control.
Download or read book Digital Communications Fundamentals Applications 2 E written by Sklar and published by Pearson Education India. This book was released on 2009-09 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book STAR written by and published by . This book was released on 1973 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Telecommunications Engineer s Reference Book written by Fraidoon Mazda and published by Butterworth-Heinemann. This book was released on 2014-06-28 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Telecommunications Engineer's Reference Book maintains a balance between developments and established technology in telecommunications. This book consists of four parts. Part 1 introduces mathematical techniques that are required for the analysis of telecommunication systems. The physical environment of telecommunications and basic principles such as the teletraffic theory, electromagnetic waves, optics and vision, ionosphere and troposphere, and signals and noise are described in Part 2. Part 3 covers the political and regulatory environment of the telecommunications industry, telecommunication standards, open system interconnect reference model, multiple access techniques, and network management. The last part deliberates telecommunication applications that includes synchronous digital hierarchy, asynchronous transfer mode, integrated services digital network, switching systems, centrex, and call management. This publication is intended for practicing engineers, and as a supplementary text for undergraduate courses in telecommunications.
Download or read book Continuous Time Sigma Delta Modulation for A D Conversion in Radio Receivers written by Lucien Breems and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the design and theory of continuous-time sigma-delta modulators for analogue-to-digital conversion in radio receivers. The book's main focus is on dynamic range, linearity and power efficiency aspects of sigma-delta modulators, which are very important requirements for use in battery operated receivers.
Download or read book Official Gazette written by Philippines and published by . This book was released on 1995 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Programs written by and published by . This book was released on 1976 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many interesting design trends are shown by the six papers on operational amplifiers (Op Amps). Firstly. there is the line of stand-alone Op Amps using a bipolar IC technology which combines high-frequency and high voltage. This line is represented in papers by Bill Gross and Derek Bowers. Bill Gross shows an improved high-frequency compensation technique of a high quality three stage Op Amp. Derek Bowers improves the gain and frequency behaviour of the stages of a two-stage Op Amp. Both papers also present trends in current-mode feedback Op Amps. Low-voltage bipolar Op Amp design is presented by leroen Fonderie. He shows how multipath nested Miller compensation can be applied to turn rail-to-rail input and output stages into high quality low-voltage Op Amps. Two papers on CMOS Op Amps by Michael Steyaert and Klaas Bult show how high speed and high gain VLSI building blocks can be realised. Without departing from a single-stage OT A structure with a folded cascode output, a thorough high frequency design technique and a gain-boosting technique contributed to the high-speed and the high-gain achieved with these Op Amps. . Finally. Rinaldo Castello shows us how to provide output power with CMOS buffer amplifiers. The combination of class A and AB stages in a multipath nested Miller structure provides the required linearity and bandwidth.
