Download or read book Circuit Architectures for High Speed CMOS Clock and Data Recovery Circuits written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analog Circuit Design written by Michiel Steyaert and published by Springer Science & Business Media. This book was released on 2008-09-19 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design contains the contribution of 18 tutorials of the 17th workshop on Advances in Analog Circuit Design. Each part discusses a specific to-date topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 17 in this successful series of Analog Circuit Design.
Download or read book High Speed CMOS Circuits for Optical Receivers written by Jafar Savoj and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exponential growth of the number of Internet nodes, the volume of the data transported on the backbone has increased with the same trend. The load of the global Internet backbone will soon increase to tens of terabits per second. This indicates that the backbone bandwidth requirements will increase by a factor of 50 to 100 every seven years. Transportation of such high volumes of data requires suitable media with low loss and high bandwidth. Among the available transmission media, optical fibers achieve the best performance in terms of loss and bandwidth. High-speed data can be transported over hundreds of kilometers of single-mode fiber without significant loss in signal integrity. These fibers progressively benefit from reduction of cost and improvement of perf- mance. Meanwhile, the electronic interfaces used in an optical network are not capable of exploiting the ultimate bandwidth of the fiber, limiting the throughput of the network. Different solutions at both the system and the circuit levels have been proposed to increase the data rate of the backbone. System-level solutions are based on the utilization of wave-division multiplexing (WDM), using different colors of light to transmit s- eral sequences simultaneously. In parallel with that, a great deal of effort has been put into increasing the operating rate of the electronic transceivers using highly-developed fabrication processes and novel c- cuit techniques.
Download or read book Monolithic Phase Locked Loops and Clock Recovery Circuits written by Behzad Razavi and published by John Wiley & Sons. This book was released on 1996-04-18 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring an extensive 40 page tutorial introduction, this carefully compiled anthology of 65 of the most important papers on phase-locked loops and clock recovery circuits brings you comprehensive coverage of the field-all in one self-contained volume. You'll gain an understanding of the analysis, design, simulation, and implementation of phase-locked loops and clock recovery circuits in CMOS and bipolar technologies along with valuable insights into the issues and trade-offs associated with phase locked systems for high speed, low power, and low noise.
Download or read book Design of High Speed CMOS Clock and Data Recovery Circuits for Broadband Receivers written by Xinyu Chen and published by . This book was released on 2003 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of CMOS Phase Locked Loops written by Behzad Razavi and published by Cambridge University Press. This book was released on 2020-01-30 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a modern, pedagogical approach, this textbook gives students and engineers a comprehensive and rigorous knowledge of CMOS phase-locked loop (PLL) design for a wide range of applications. It features intuitive presentation of theoretical concepts, built up gradually from their simplest form to more practical systems; broad coverage of key topics, including oscillators, phase noise, analog PLLs, digital PLLs, RF synthesizers, delay-locked loops, clock and data recovery circuits, and frequency dividers; tutorial chapters on high-performance oscillator design, covering fundamentals to advanced topologies; and extensive use of circuit simulations to teach design mentality, highlight design flaws, and connect theory with practice. Including over 200 thought-provoking examples highlighting best practices and common pitfalls, 250 end-of-chapter homework problems to test and enhance the readers' understanding, and solutions and lecture slides for instructors, this is the perfect text for senior undergraduate and graduate-level students and professional engineers who want an in-depth understanding of PLL design.
Download or read book High speed Clock and Data Recovery Circuits in CMOS Technology microform written by Afshin Rezayee and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 2003 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS Current Mode Circuits for Data Communications written by Fei Yuan and published by Springer Science & Business Media. This book was released on 2007-04-26 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis and design of CMOS current-mode circuits for data communications. CMOS current-mode sampled-data networks, i.e. switched-current circuits, are excluded. Major subjects covered in the book include: a critical comparison of voltage-mode and current-mode circuits; the building blocks of current-mode circuits: design techniques; modeling of wire channels, electrical signaling for Gbps data communications; ESD protection for current-mode circuits and more. This book will appeal to IC design engineers, hardware system engineers and others.
Download or read book DRAM Circuit Design written by Brent Keeth and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern, comprehensive introduction to DRAM for students and practicing chip designers Dynamic Random Access Memory (DRAM) technology has been one of the greatestdriving forces in the advancement of solid-state technology. With its ability to produce high product volumes and low pricing, it forces solid-state memory manufacturers to work aggressively to cut costs while maintaining, if not increasing, their market share. As a result, the state of the art continues to advance owing to the tremendous pressure to get more memory chips from each silicon wafer, primarily through process scaling and clever design. From a team of engineers working in memory circuit design, DRAM Circuit Design gives students and practicing chip designers an easy-to-follow, yet thorough, introductory treatment of the subject. Focusing on the chip designer rather than the end user, this volume offers expanded, up-to-date coverage of DRAM circuit design by presenting both standard and high-speed implementations. Additionally, it explores a range of topics: the DRAM array, peripheral circuitry, global circuitry and considerations, voltage converters, synchronization in DRAMs, data path design, and power delivery. Additionally, this up-to-date and comprehensive book features topics in high-speed design and architecture and the ever-increasing speed requirements of memory circuits. The only book that covers the breadth and scope of the subject under one cover, DRAM Circuit Design is an invaluable introduction for students in courses on memory circuit design or advanced digital courses in VLSI or CMOS circuit design. It also serves as an essential, one-stop resource for academics, researchers, and practicing engineers.
Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O.
Download or read book High Speed CMOS Design Styles written by Kerry Bernstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Speed CMOS Design Styles is written for the graduate-level student or practicing engineer who is primarily interested in circuit design. It is intended to provide practical reference, or `horse-sense', to mechanisms typically described with a more academic slant. This book is organized so that it can be used as a textbook or as a reference book. High Speed CMOS Design Styles provides a survey of design styles in use in industry, specifically in the high speed microprocessor design community. Logic circuit structures, I/O and interface, clocking, and timing schemes are reviewed and described. Characteristics, sensitivities and idiosyncrasies of each are highlighted. High Speed CMOS Design Styles also pulls together and explains contributors to performance variability that are associated with process, applications conditions and design. Rules of thumb and practical references are offered. Each of the general circuit families is then analyzed for its sensitivity and response to this variability. High Speed CMOS Design Styles is an excellent source of ideas and a compilation of observations that highlight how different approaches trade off critical parameters in design and process space.
Download or read book Ultra High Speed CMOS Circuits written by Sam Gharavi and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the CMOS-based millimeter wave circuits and devices and presents methods and design techniques to use CMOS technology for circuits operating beyond 100 GHz. Coverage includes a detailed description of both active and passive devices, including modeling techniques and performance optimization. Various mm-wave circuit blocks are discussed, emphasizing their design distinctions from low-frequency design methodologies. This book also covers a device-oriented circuit design technique that is essential for ultra high speed circuits and gives some examples of device/circuit co-design that can be used for mm-wave technology.
Download or read book Phase Locking in High Performance Systems written by Behzad Razavi and published by Wiley-IEEE Press. This book was released on 2003-02-27 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of recent developments in phase-locked loop technology The rapid growth of high-speed semiconductor and communication technologies has helped make phase-locked loops (PLLs) an essential part of memories, microprocessors, radio-frequency (RF) transceivers, broadband data communication systems, and other burgeoning fields. Complementing his 1996 Monolithic Phase-Locked Loops and Clock Recovery Circuits (Wiley-IEEE Press), Behzad Razavi now has collected the most important recent writing on PLL into a comprehensive, self-contained look at PLL devices, circuits, and architectures. Phase-Locking in High-Performance Systems: From Devices to Architectures' five original tutorials and eighty-three key papers provide an eminently readable foundation in phase-locked systems. Analog and digital circuit designers will glean a wide range of practical information from the book's . . . * Tutorials dealing with devices, delay-locked loops (DLLs), fractional-N synthesizers, bang-bang PLLs, and simulation of phase noise and jitter * In-depth discussions of passive devices such as inductors, transformers, and varactors * Papers on the analysis of phase noise and jitter in various types of oscillators * Concentrated examinations of building blocks, including the design of oscillators, frequency dividers, and phase/frequency detectors * Articles addressing the problem of clock generation by phase-locking for timing and digital applications, RF synthesis, and the application of phase-locking to clock and data recovery circuits In tandem with its companion volume, Phase-Locking in High-Performance Systems: From Devices to Architectures is a superb reference for anyone working on, or seeking to better understand, this rapidly-developing and increasingly central technology.
Download or read book Phase Locked Frequency Generation and Clocking written by Woogeun Rhee and published by Institution of Engineering and Technology. This book was released on 2020-06-09 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase-Locked Frequency Generation and Clocking covers essential topics and issues in current Phase-Locked Loop design, from a light touch of fundamentals to practical design aspects. Both wireless and wireline systems are considered in the design of low noise frequency generation and clocking systems. Topics covered include architecture and design, digital-intensive Phase-Locked Loops, low noise frequency generation and modulation, clock-and-data recovery, and advanced clocking and clock generation systems. The book not only discusses fundamental architectures, system design considerations, and key building blocks but also covers advanced design techniques and architectures in frequency generation and clocking systems. Readers can expect to gain insights into phase-locked clocking as well as system perspectives and circuit design aspects in modern Phase-Locked Loop design.
Download or read book CMOS Time Mode Circuits and Systems written by Fei Yuan and published by CRC Press. This book was released on 2018-09-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-mode circuits, where information is represented by time difference between digital events, offer a viable and technology-friendly means to realize mixed-mode circuits and systems in nanometer complementary metal-oxide semiconductor (CMOS) technologies. Various architectures of time-based signal processing and design techniques of CMOS time-mode circuits have emerged; however, an in-depth examination of the principles of time-based signal processing and design techniques of time-mode circuits has not been available—until now. CMOS Time-Mode Circuits and Systems: Fundamentals and Applications is the first book to deliver a comprehensive treatment of CMOS time-mode circuits and systems. Featuring contributions from leading experts, this authoritative text contains a rich collection of literature on time-mode circuits and systems. The book begins by presenting a critical comparison of voltage-mode, current-mode, and time-mode signaling for mixed-mode signal processing and then: Covers the fundamentals of time-mode signal processing, such as voltage-to-time converters, all-digital phase-locked loops, and frequency synthesizers Investigates the performance characteristics, architecture, design techniques, and implementation of time-to-digital converters Discusses time-mode delta-sigma-based analog-to-digital converters, placing a great emphasis on time-mode quantizers Includes a detailed study of ultra-low-power integrated time-mode temperature measurement systems CMOS Time-Mode Circuits and Systems: Fundamentals and Applications provides a valuable reference for circuit design engineers, hardware system engineers, graduate students, and others seeking to master this fast-evolving field.
Download or read book High Speed Clock Network Design written by Qing K. Zhu and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Speed Clock Network Design is a collection of design concepts, techniques and research works from the author for clock distribution in microprocessors and high-performance chips. It is organized in 11 chapters.
Download or read book Semidigital Clock data Recovery System and Bandwidth Extension for Esd protected High speed Io Circuits written by and published by Ankit Srivastava. This book was released on with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
