Download or read book Chromogenic Phenomena in Polymers written by Samson A. Jenekhe and published by . This book was released on 2005 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chromogenic Phenomena in Polymers: Tunable Optical Properties describes diverse physicochemical methods of tuning the optical properties of polymeric materials in real time. This book also summarizes recent advances in the design, properties and applications of electrochromic, photochromic, electroluminescent, selective reflective, and photonic band-gap polymers.
Download or read book Thermochromic Phenomena in Polymers written by Arno Seeboth and published by Smithers Rapra Technology. This book was released on 2008 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first title in the new Smithers Rapra Updates series focuses on the thermochromic phenomena in polymers. The content is structured according to the thermochromic material type. Chapter 1 will give an overview about polymers exhibiting thermochromic properties themselves. Thermochromic polymer systems obtained by doping the polymer matrix with thermochromic additives are reported in Chapter 2 and Chapter 3 reviews on polymer systems in which the interaction between the polymer matrix and an incorporated additive is the origin of thermochromism. Finally, in the fourth chapter polymer system.
Download or read book Chromic Phenomena written by Peter Bamfield and published by Royal Society of Chemistry. This book was released on 2018-08-22 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chromic or colour related phenomena are produced in response to a chemical or physical stimulus. This new edition will update the information on all those areas where chemicals or materials interact with light to produce colour, a colour change, or luminescence especially in the imaging, analysis, lighting and display areas. The book has been restructured to show greater emphasis on applications where 'coloured' compounds are used to transfer energy or manipulate light in some way therefore reducing the details on classical dyes and pigments. In the past eight years, since the previous edition, there has been a remarkable increase in the number of papers and reviews being produced reflecting the growth of interest in this area. This ongoing research interest is matched by a large number of new technological applications gaining commercial value covering e.g. biomedical areas, energy, data storage, physical colour, bio-inspired materials and photonics. This book appeals to industrial chemists, professionals, postgraduates and as high level recommended reading for colour technology courses.
Download or read book Thermochromic and Thermotropic Materials written by Arno Seeboth and published by CRC Press. This book was released on 2013-12-23 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chromogenic materials change their optical properties in response to an external stimulus. Due to their potential applications as light valve (e.g., in sun protecting glazing) or as temperature sensor, thermotropic, and thermochromic materials have come more and more into the focus of research and development. Commercialization of such high-tech pr
Download or read book Processing and Finishing of Polymeric Materials 2 Volume Set written by Wiley and published by John Wiley & Sons. This book was released on 2012-12-03 with total page 1477 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the processing and finishing of polymeric materials for scientists and practitioners Owing to their versatility and wide range of applications, polymeric materials are of great commercial importance. Manufacturing processes of commercial products are designed to meet the requirements of the final product and are influenced by the physical and chemical properties of the polymeric material used. Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, Processing and Finishing of Polymeric Materials provides comprehensive, up-to-date details on the latest manufacturing technologies, including blending, compounding, extrusion,molding, and coating. Written by prominent scholars from industry, academia, and research institutions from around the globe, this reference features more than forty selected reprints from the Encyclopedia as well as new contributions, providing unparalleled coverage of such topics as: Additives Antistatic agents Bleaching Blowing agents Calendaring Casting Coloring processes Dielectric heating Electrospinning Embedding Processing and Finishing of Polymeric Materials is an ideal resource for polymer and materials scientists, chemists, chemical engineers, materials scientists, process engineers, and consultants, and serves as a valuable addition to libraries of chemistry, chemical engineering, and materials science in industry, academia, and government.
Download or read book Carraher s Polymer Chemistry written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2017-10-12 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carraher's Polymer Chemistry, Tenth Edition integrates the core areas of polymer science. Along with updating of each chapter, newly added content reflects the growing applications in Biochemistry, Biomaterials, and Sustainable Industries. Providing a user-friendly approach to the world of polymeric materials, the book allows students to integrate their chemical knowledge and establish a connection between fundamental and applied chemical information. It contains all of the elements of an introductory text with synthesis, property, application, and characterization. Special sections in each chapter contain definitions, learning objectives, questions, case studies and additional reading.
Download or read book Carraher s Polymer Chemistry Ninth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2016-04-19 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the advancements in communication, computers, medicine, and air and water purity are linked to macromolecules and a fundamental understanding of the principles that govern their behavior. These fundamentals are explored in Carraher's Polymer Chemistry, Ninth Edition. Continuing the tradition of previous volumes, the latest edition provides a well-rounded presentation of the principles and applications of polymers. With an emphasis on the environment and green chemistry and materials, this edition offers detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, biomacromolecules, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Using simple fundamentals, this book demonstrates how the basic principles of one polymer group can be applied to all of the other groups. It covers reactivities, synthesis and polymerization reactions, techniques for characterization and analysis, energy absorption and thermal conductivity, physical and optical properties, and practical applications. This edition includes updated techniques, new sections on a number of copolymers, expanded emphasis on nanotechnology and nanomaterials, and increased coverage of topics including carbon nanotubes, tapes and glues, photochemistry, and more. With topics presented so students can understand polymer science even if certain parts of the text are skipped, this book is suitable as an undergraduate as well as an introductory graduate-level text. The author begins most chapters with theory followed by application, and generally addresses the most critical topics first. He provides all of the elements of an introductory text, covering synthesis, properties, applications, and characterization. This user-friendly book also contains definitions, learning objectives, questions, and additional reading in each chapter.
Download or read book Carraher s Polymer Chemistry Eighth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2010-10-13 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect a growing focus on green chemistry in the scientific community and in compliance with the American Chemical Society’s Committee on Professional Training guidelines, Carraher’s Polymer Chemistry, Eighth Edition integrates the core areas that contribute to the growth of polymer science. It supplies the basic understanding of polymers essential to the training of science, biomedical, and engineering students. New in the Eighth Edition: Updating of analytical, physical, and special characterization techniques Increased emphasis on carbon nanotubes, tapes and glues, butyl rubber, polystyrene, polypropylene, polyethylene, poly(ethylene glycols), shear-thickening fluids, photo-chemistry and photophysics, dental materials, and aramids New sections on copolymers, including fluoroelastomers, nitrile rubbers, acrylonitrile-butadiene-styrene terpolymers, and EPDM rubber New units on spliceosomes, asphalt, and fly ash and aluminosilicates Larger focus on the molecular behavior of materials, including nano-scale behavior, nanotechnology, and nanomaterials Continuing to provide a user-friendly approach to the world of polymeric materials, the book allows students to integrate their chemical knowledge and establish a connection between fundamental and applied chemical information. It contains all of the elements of an introductory text with synthesis, property, application, and characterization. Special sections in each chapter contain definitions, learning objectives, questions, and additional reading, with case studies woven into the text fabric. Symbols, trade names, websites, and other useful ancillaries appear in the appendices to supplement the text.
Download or read book Handbook of Stimuli Responsive Materials written by Marek W. Urban and published by John Wiley & Sons. This book was released on 2011-02-25 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a broad approach, this volume provides the scientific community with a much-needed overview of developments and scientific findings in stimuli-responsive materials. Its primary focus is on the designing, synthesizing, formulating, and processing of materials that lead to an understanding of the scientific principles governing response driven functions leading to future technologies. The highly experienced and internationally renowned editor has assembled a team of leading scientists from the interdisciplinary areas of: * polymers * biopolymers * biochemistry * biophysics * biomaterials * bioengineering * materials engineering * biotechnology * chemistry * physics * ceramics * metals * and materials science. A combination that guarantees a unique and high-quality handbook.
Download or read book Introduction to Organic Electronic and Optoelectronic Materials and Devices written by Sam-Shajing Sun and published by CRC Press. This book was released on 2016-10-03 with total page 1394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the combined subjects of organic electronic and optoelectronic materials/devices. It is designed for classroom instruction at the senior college level. Highlighting emerging organic and polymeric optoelectronic materials and devices, it presents the fundamentals, principle mechanisms, representative examples, and key data.
Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.
Download or read book Frontiers of Advanced Materials and Engineering Technology written by Ran Chen and published by Trans Tech Publications Ltd. This book was released on 2012-01-03 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2012 International Conference on Frontiers of Advanced Materials and Engineering Technology (FAMET 2012), January 4-5, Xiamen, China
Download or read book Self assembling Biomaterials written by Helena S. Azevedo and published by Woodhead Publishing. This book was released on 2018-04-17 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-assembling biomaterials: molecular design, characterization and application in biology and medicine provides a comprehensive coverage on an emerging area of biomaterials science, spanning from conceptual designs to advanced characterization tools and applications of self-assembling biomaterials, and compiling the recent developments in the field. Molecular self-assembly, the autonomous organization of molecules, is ubiquitous in living organisms and intrinsic to biological structures and function. Not surprisingly, the exciting field of engineering artificial self-assembling biomaterials often finds inspiration in Biology. More important, materials that self-assemble speak the language of life and can be designed to seamlessly integrate with the biological environment, offering unique engineering opportunities in bionanotechnology. The book is divided in five parts, comprising design of molecular building blocks for self-assembly; exclusive features of self-assembling biomaterials; specific methods and techniques to predict, investigate and characterize self-assembly and formed assemblies; different approaches for controlling self-assembly across multiple length scales and the nano/micro/macroscopic properties of biomaterials; diverse range of applications in biomedicine, including drug delivery, theranostics, cell culture and tissue regeneration. Written by researchers working in self-assembling biomaterials, it addresses a specific need within the Biomaterials scientific community. - Explores both theoretical and practical aspects of self-assembly in biomaterials - Includes a dedicated section on characterization techniques, specific for self-assembling biomaterials - Examines the use of dynamic self-assembling biomaterials
Download or read book Handbook of Organic Materials for Electronic and Photonic Devices written by Oksana Ostroverkhova and published by Woodhead Publishing. This book was released on 2018-11-30 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Organic Materials for Electronic and Photonic Devices, Second Edition, provides an overview of the materials, mechanisms, characterization techniques, structure-property relationships, and most promising applications of organic materials. This new release includes new content on emerging organic materials, expanded content on the basic physics behind electronic properties, and new chapters on organic photonics. As advances in organic materials design, fabrication, and processing that enabled charge unprecedented carrier mobilities and power conversion efficiencies have made dramatic advances since the first edition, this latest release presents a necessary understanding of the underlying physics that enabled novel material design and improved organic device design. - Provides a comprehensive overview of the materials, mechanisms, characterization techniques, and structure property relationships of organic electronic and photonic materials - Reviews key applications, including organic solar cells, light-emitting diodes electrochemical cells, sensors, transistors, bioelectronics, and memory devices - New content to reflect latest advances in our understanding of underlying physics to enable material design and device fabrication
Download or read book Materials that Change Color written by Marinella Ferrara and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a design-driven investigation into smart materials developed by chemists, physicists, materials and chemical engineers, and applied by designers to consumer products. Introducing a class of smart materials, that change colors, the book presents their characteristics, advantages, potentialities and difficulties of applications of this to help understanding what they are, how they work, how they are applied. The books also present a number of case studies: products, projects, concepts and experiments using smart materials, thus mapping out new design territories for these innovative materials. These case studies involve different fields of design, including product, interior, fashion and communication design. Within the context of rising sustainable and human-centered design agendas, the series will demonstrate the role and influence of these new materials and technologies on design, and discuss how they can implement and redefine our objects and spaces to encourage more resilient environments.
Download or read book Seymour Carraher s Polymer Chemistry Seventh Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2008 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect a growing focus on green chemistry in the scientific community and in compliance with the American Chemical Societye(tm)s Committee on Professional Training guidelines, Carrahere(tm)s Polymer Chemistry, Eighth Edition integrates the core areas that contribute to the growth of polymer science. It supplies the basic understanding of polymers essential to the training of science, biomedical, and engineering students. New in the Eighth Edition: Updating of analytical, physical, and special characterization techniques Increased emphasis on carbon nanotubes, tapes and glues, butyl rubber, polystyrene, polypropylene, polyethylene, poly(ethylene glycols), shear-thickening fluids, photo-chemistry and photophysics, dental materials, and aramids New sections on copolymers, including fluoroelastomers, nitrile rubbers, acrylonitrile-butadiene-styrene terpolymers, and EPDM rubber New units on spliceosomes, asphalt, and fly ash and aluminosilicates Larger focus on the molecular behavior of materials, including nano-scale behavior, nanotechnology, and nanomaterials Continuing to provide a user-friendly approach to the world of polymeric materials, the book allows students to integrate their chemical knowledge and establish a connection between fundamental and applied chemical information. It contains all of the elements of an introductory text with synthesis, property, application, and characterization. Special sections in each chapter contain definitions, learning objectives, questions, and additional reading, with case studies woven into the text fabric. Symbols, trade names, websites, and other useful ancillaries appear in the appendices to supplement the text.
Download or read book Functionalized Polymers written by Narendra Pal Singh Chauhan and published by CRC Press. This book was released on 2021-05-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized polymers are macromolecules to which chemically bound functional groups are attached which can be used as catalysts, reagents, protective groups, etc. Functionalized polymers have low cost, ease of processing and attractive features for functional organic molecules. Chemical reactions for the introduction of functional groups in polymers and the conversion of functional groups in polymers depend on different properties. Such properties are of great importance for functionalization reactions for possible applications of reactive polymers. This book deals with the synthesis and design of various functional polymers, the modification of preformed polymer backbones and their various applications.
