Download or read book Chemistry of Marine Water and Sediments written by Antonio Gianguzza and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most important processes on the Earth`s surface occur in the Ocean where materials and energy are primarily exchanged. In the case of marine chemistry different fields of chemistry from organic to inorganic as well as thermodynamics and biochemistry are involved. Analytical Chemistry is a very important tool for the quantification of biogeochemical processes by providing correct and even more sophisticated methodologies. These are often directly applied 'in situ', in order to detect trace and ultra-trace natural and anthropogenic substances. Kinetic and thermodynamic studies allow us to establish whether the process occurs. Once discovered it is then possible to build up general models for environmental systems. This book gathers many aspects with the aim of creating a general picture of the chemical processes occurring in the marine environment

Download or read book Chemical Processes in Marine Environments written by Antonio Gianguzza and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses recent developments in the study of chemical processes and equilibria in the marine environment and in the air/water and water/sediment interfaces. The chemical cycle of carbon as well as the effect of organic substances on the speciation and distribution of inorganic and organometallic substances are extensively discussed. Much of the recent progress in the area is the direct result of advanced analytical technologies and chemometric applications which are highlighted in the book.

Download or read book Acid Base Catalysis II written by H. Hattori and published by Elsevier. This book was released on 1994-11-01 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid acid catalysts are already being used in various processes in petroleum refining and are presently being studied intensively in both academic and applied fields for usage in a variety of reactions. Solid base catalysts are also gaining increasing recognition as potential catalysts. Both acidic and basic catalysts are promising not only with respect to acid and base-catalyzed reactions but also in materials sciences, such as the production of adsorbents, sensors, ceramics, etc.The present volume presents the text of 21 invited oral presentations and 58 poster presentations. The material covers a wide range of aspects on acid-base catalysis, from quantum chemistry to industrialized processes.

Download or read book Surface Chemistry in Biomedical and Environmental Science written by Jonathan P. Blitz and published by Springer Science & Business Media. This book was released on 2006-09-09 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume holds a special niche in describing the current state of the art in the fundamentals and applications of a variety of nanomaterials. A common theme throughout much of this volume involves adsorption and interfacial behavior of nanomaterials. The book provides a useful mixture of reviews and primary research from leading laboratories and offers a unique blend of East European and Western contributors.

Download or read book Homogeneous and Heterogeneous Catalysis written by and published by VSP. This book was released on 1986-06 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains plenary lectures and selected poster communications spanning the entire field of catalysis --- from catalysis by protons to catalysis by multinuclear clusters and ultra-disperse particles. It includes discussion of the recent results of fundamental research conducted at the juncture between homogeneous and heterogeneous catalysis. New ideas, based on modern physical and quantum-chemical methods, and concerning the mechanism of formation and functioning of active sites of catalysts are suggested. It is shown how the cyclic change of atomic distribution in the active site occurs during catalytic transformations. In addition, the Proceedings report new data on methods of ''assembling'' molecularly organized catalytic systems and on the mechanisms of their action. The various problems such as the effect of strong metal--support interaction, migration of atoms in active sites, and design of catalytic properties of substances are also widely discussed. Similarities and differences in mechanisms of action of homogeneous and heterogeneous catalysts are considered, using as examples CO hydrogenation, hydrogenolysis of saturated hydrocarbons, selective hydrogenation and oxidation of olefins, metathesis and polymerization of olefins, hydrosilylation and hydroformylation of olefins, etc.

Download or read book Classified Catalogue of the Carnegie Library of Pittsburgh 1907 1911 written by and published by . This book was released on 1913 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Classified Catalogue of the Carnegie Library of Pittsburgh 1907 1911 written by Carnegie Library of Pittsburgh and published by . This book was released on 1914 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Classified Catalogue of the Carnegie Library of Pittsburgh written by Pittsburgh, Pa. Carnegie Free Library of Alleghany and published by . This book was released on 1913 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Classified Catalogue written by Carnegie Library of Pittsburgh and published by . This book was released on 1914 with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Classified Catalogue of the Carnegie Library of Pittsburgh written by Carnegie Library of Pittsburgh and published by . This book was released on 1914 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book World Directory of Crystallographers written by Yves Epelboin and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 10th edition of the World Directory of Crystallographers and of Other Scientists Employing Crystallographic Methods is a revised and up-to-date edition of the World Directory and contains the current addresses, academic status and research interests of over 8000 scientists in 74 countries. It is produced directly from the regularly updated electronic World Directory database, which is accessible via the World-Wide Web. Full details of the database are given in an Annex to the printed edition.

Download or read book PROCEEDINGS 4th International Congress on Science and Technology for the Safeguard of Cultural Heritage in the Mediterranean Basin VOL II written by and published by Angelo Ferrari. This book was released on with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry of Tin written by P.J. Smith and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: In common with the editor of the first edition, my own personal involvement with tin chemistry began when I had the privilege of studying for a PhD degree under the supervision of Professor Alwyn G. Davies FRS at University College London (UCL) almost exactly 30 years ago. Then, following 21 years' service with the International Tin Research Institute, it was a great pleasure for me when the wheel turned full circle and, in 1994, Alwyn - now an Emeritus Professor - asked me to return to UCL as an Honorary Research Fellow in the Chemistry Department. One of my first tasks was when I received an invitation from Blackie A&P to edit the second edition of the Chemistry of Tin, which I was delighted to accept, since it enabled me to continued my life-long interest in tin chemistry and to maintain contact with my former friends and colleagues, many of whom have contributed to this book.

Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.

Download or read book Catalysis for Renewables written by Gabriele Centi and published by John Wiley & Sons. This book was released on 2008-01-08 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its focus on catalysis and addressing two very hot and timely topics with significant implications for our future lives, this will be a white book in the field. The authority behind this practical work is the IDECAT Network of Excellence, and the authors here outline how the use of catalysis will promote the more extensive use of renewable feedstocks in chemical and energy production. They present the latest applications, their applicability and results, making this a ready reference for researchers and engineers working in catalysis, chemistry, and industrial processes wishing to analyze options, outlooks and opportunities in the field.

Download or read book Physics and Chemistry of Metal Cluster Compounds written by L.J. de Jongh and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: On Friday, February 20, 1980, I had the pleasure to be present at the inaugural lecture of my colleague Jan Reedijk, who had just been named at the Chair of Inorganic Chemistry of Leiden University. According to tradition, the ceremony took place in the impressive Hall of the old University Academy Building. In the course of his lecture, Jan mentioned a number of recent developments in chemistry which had struck him as particularly important or interesting. Among those was the synthesis of large metal cluster compounds, and, to my luck, he showed a slide ofthe molecular structure of [PtI9(C)b]4-. (To my luck, since at traditional Leiden University it is quite unusual to show slides at such ceremonies.) This constituted my first acquaintance with this exciting new class of materials. I became immediately fascinated by this molecule, partly because of the esthetic beauty of its fivefold symmetry, partly because as a physicist it struck me that it could be visualized as an "embryonically small" metal particle, embedded in a shell of CO ligands.

Download or read book The Synergy Between Dynamics and Reactivity at Clusters and Surfaces written by L.J. Farrugia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analogy between the chemistry of molecular transition metal clusters and the processes of chemisorption and catalysis at metal surfaces (the Cluster Surface analogy) has for a number of years provided an interplay between experimental and theoretical inorganic and physical chemists. This collaborative approach has born fruit in the use of well defined modes of metal-ligand bonding in discrete molecular clusters, models for metal-ligand binding on surfaces. Some of the key topics discussed in The Synergy between Dynamics and Reactivity at Clusters and Surfaces are: (1) Mechanisms of the fluxional behaviour in clusters in the liquid phase and the connections with diffusion processes on extended surfaces. The role of metal-metal bond breaking in diffusion. (2) Analogies in the structure of chemisorbed species and related ligands on metallic clusters. (3) Analogies between benzene surface chemistry on extended metal surfaces and on metal surfaces in molecular cluster compounds with particular reference to structural distortions. (4) The role of mobile precursors for dissociation of chemisorption on extended metals and on clusters. Are there analogies in the ligand attachment during cluster compound synthesis? (5) The role of defect sites on metal surfaces in catalyzing chemical reactions and the connection to the special bonding properties of sites on metal clusters having lowest metal-metal coordination. (6) The size of metal clusters needed to mimic surface phenomena on bulk metal surfaces. Different sites needed for different phenomena.