Download or read book Chemistry in the Utilization of Wood written by R. H. Farmer and published by Elsevier. This book was released on 2013-10-22 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry in the Utilization of Wood deals with the chemistry of wood and its technical and practical applications. It shows how the chemical nature of wood influences its properties and utilization, both as a constructional material and as the raw material for the manufacture of secondary products such as pulp and paper, cellulose derivatives, and board materials. Comprised of 12 chapters, this volume begins with an introduction to the chemical nature of wood, including a brief treatment of its anatomical structure. The discussion then turns to the chemistry of wood cell wall components such as cellulose, hemicellulose, and lignin; the principles of the methods employed in wood analysis, with emphasis on the determination of moisture content and extractives, cellulose, pentosan, and other polysaccharides; the influence of extractives on the properties and utilization of wood; and the use of timber in conjunction with chemicals. Other chapters deal with the conversion of wood into chemical products; corrosion of metals in association with wood; and the relationship between wood and water. The chemical aspects of wood attack by fungi and insects are also considered, along with destructive distillation of wood. This book is primarily intended for technical men in the wood-using industries who have an interest in wood and some knowledge of chemistry, and for students entering any field of wood technology.
Download or read book Chemical Utilization of Wood written by National Committee on Wood Utilization (U.S.) and published by . This book was released on 1932 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Chemistry written by Eero Sjostrom and published by Elsevier. This book was released on 2013-10-22 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood Chemistry, Fundamentals and Applications, Second Edition, examines the basic principles of wood chemistry and its potential applications to pulping and papermaking, wood and wood waste utilization, pulping by-products for production of chemicals and energy, and biomass conversion.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Chemical Utilization of Wood written by National Committee on Wood Utilization (U.S.) and published by . This book was released on 1932 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry of Cellulose and Wood written by Arlie William Schorger and published by . This book was released on 1926 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Utilization of Wood written by Alfred J. Stamm and published by . This book was released on 1946 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Chemistry and Wood Biotechnology written by Monica Ek and published by Walter de Gruyter. This book was released on 2009-12-15 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources. Volume 1 provides a survey of the biological and chemical structure of wood as well as an introduction to the chemical reactions used during pulp production processes. The work presents the different raw materials used for pulp production, the macroscopic and morphological construction of wood and related characterization methods, the chemical structure and arrangement of the wood polymers and extractives, biosynthesis of wood polymers, carbohydrate and lignin analysis, reactions of wood polymers in mechanical and chemical pulping and bleaching processes, biotechnical processes of relevance for the pulp and paper industry, different types of microorganisms and their modes of interaction with wood, the impact of chemical and microbiological processes on the hierarchical structure of wood and pulp.
Download or read book The Chemical Technology of Wood written by Harmann Wenzl and published by Elsevier. This book was released on 2012-12-02 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemical Technology of Wood is an eight-chapter introductory text on the developments in understanding the chemistry of wood and its chemical-technological utilization. The opening chapters of this book cover the productive aspects of forests, followed by a description of the anatomy and physical properties of wood. The subsequent chapter presents a summative wood analysis concerning its cellulose, hemicelluloses, lignin, and other extraneous components. This topic is followed by a presentation of several destructive processing of wood, including acid hydrolysis, pyrolysis, oxidation, and hydrogenolysis. The remaining chapters describe the pulp production through sulfite cooking and using alkaline reagents. This book will prove useful to chemists, engineers, biologists, foresters, and economists.
Download or read book Utilization of the Southern Pines written by Peter Koch and published by . This book was released on 1972 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Biology of Reaction Wood written by Barry Gardiner and published by Springer Science & Business Media. This book was released on 2014-01-08 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a fundamental reference source on reaction wood for wood scientists and technologists, plant biologists, silviculturists, forest ecologists, and anyone involved in the growing of trees and the processing of wood. It brings together our current understanding of all aspects of reaction wood, and is the first book to discuss both compression wood and tension wood. Trees produce reaction wood to maintain the vertical orientation of their stems and the optimum angle of each branch. They achieve this by laying down fibre cell walls in which differences in physical and chemical structure from those of normal fibres are expressed as differential stresses across the stem or branch. This process, while of obvious value for the survival of the tree, causes serious problems for the utilisation of timber. Timber derived from trees containing significant amounts of reaction wood is subject to dimensional instability on drying, causing twisting, bending and splitting. It is also difficult to work as timber, and for the pulp and paper industry the cost of removing the increased amount of lignin in compression wood is substantial. This has both practical and economic consequences for industry. Understanding the factors controlling reaction wood formation and its effect on wood structure is therefore fundamental to our understanding of the adaptation of trees to their environment and to the sustainable use of wood. The topics covered include: -Morphology, anatomy and ultrastructure of reaction wood -Cell-wall polymers in reaction wood and their biosynthesis -Changes in tree proteomes during reaction wood formation -The biomechanical action and biological functions of reaction wood - Physical and mechanical properties of reaction wood from the scale of cell walls to planks -The detection and characterisation of compression wood -Effects of reaction wood on the performance of wood and wood-based products - Commercial implications of reaction wood and the influence of forest management on its formation
Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book Forest Products and Wood Science written by Rubin Shmulsky and published by John Wiley & Sons. This book was released on 2019-03-11 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated seventh edition of the classic text on wood science and forestry The seventh edition of Forest Products and Wood Science: An Introduction offers a fully revised and updated review of the forest products industry. This classic text contains a comprehensive review of the subject and presents a thorough understanding of the anatomical and physical nature of wood. The authors emphasize its use as an industrial raw material. Forest Products and Wood Science provides thorough coverage of all aspects of wood science and industry, ranging from tree growth and wood anatomy to a variety of economically important wood products, along with their applications and performance. The text explores global raw materials, the increasing use of wood as a source of energy and chemicals and environmental implications of the use of wood. This edition features new material on structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals, and global raw materials. This seventh edition of the classic work: Contains new information on a variety of topics including: structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals and global raw materials Includes a fully revised text that meets the changing needs of the forestry, engineering, and wood science academics and professionals Presents material written by authors with broad experience in both the private and academic sectors Written for undergraduate students in forestry, natural resources, engineering, and wood science, as well as forest industry personnel, engineers, wood-based manufacturing and using professionals, the seventh edition of Forest Products and Wood Science updates the classic text that has become an indispensable resource.
Download or read book List of Publications on Chemistry of Wood and Derived Products written by Forest Products Laboratory (U.S.) and published by . This book was released on 1952 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Wood Chemistry and Wood Composites Second Edition written by Roger M. Rowell and published by CRC Press. This book was released on 2012-09-06 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood has played a major role throughout human history. Strong and versatile, the earliest humans used wood to make shelters, cook food, construct tools, build boats, and make weapons. Recently, scientists, politicians, and economists have renewed their interest in wood because of its unique properties, aesthetics, availability, abundance, and perhaps most important of all, its renewability. However, wood will not reach its highest use potential until we fully describe it, understand the mechanisms that control its performance properties, and, finally, are able to manipulate those properties to give us the desired performance we seek. The Handbook of Wood Chemistry and Wood Composites analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood. They emphasize the mechanisms of reaction involved and resulting changes in performance properties including modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating decades of teaching experience, the editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Chemistry for Biomass Utilization written by Raimo Alén and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-04 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much interest has been directed to the versatile possibilities of using lignocellulosic biomass resources (i.e., “renewable raw materials”) for the full-scale production of various chemicals and other bioproducts together with solid, liquid, and gaseous fuels. Introduces modern aspects and various technologies of lignocellulosic biomass conversion for producing chemicals, biofuels, and other products in a reader friendly way. Starting with fundamentals of biorefi nery, the author further describes chemical, biochemical, and thermal conversion approaches. In addition, the properties and biorefining principles of non-wood biomass feedstock
Download or read book Wood Processing and Utilization written by Glyn O. Phillips and published by . This book was released on 1989 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
