Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Chemistry and Technology of Lubricants" describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. "Chemistry and Technology of Lubricants" is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.
Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has preceded an understanding ofthe scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding oflubricants.
Download or read book Synthetics Mineral Oils and Bio Based Lubricants written by Leslie R. Rudnick and published by CRC Press. This book was released on 2005-12-22 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of tribology has evolved, the lubrication industry is also progressing at an extraordinary rate. Updating the author's bestselling publication, Synthetic Lubricants and High-Performance Functional Fluids, this book features the contributions of over 60 specialists, ten new chapters, and a new title to reflect the evolving nature of the
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2017-07-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: “Contains something for everyone involved in lubricant technology” — Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Process Chemistry of Lubricant Base Stocks written by Thomas R. Lynch and published by CRC Press. This book was released on 2007-09-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in processing methods are not only improving the quality and yield of lubricant base stocks, they are also reducing the dependence on more expensive crude oil starting materials. Process Chemistry of Lubricant Base Stocks provides a comprehensive understanding of the chemistry behind the processes involved in petroleum base stock p
Download or read book A Comprehensive Review of Lubricant Chemistry Technology Selection and Design written by Syed Q. A. Rizvi and published by . This book was released on 2009 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry and Technology Lubricants written by 3Island Press and published by . This book was released on 1992-11-01 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricants written by Marika Torbacke and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2003-01-29 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text details the design of cost-effective, environmentally friendly lubricant additive technologies and components for the automotive, industrial, manufacturing, food, and aerospace industries. Presenting methods to improve the performance and stability of lubricants, protect metal surfaces against wear, and to control deposits and contaminant
Download or read book A Comprehensive Review of Lubricant Chemistry Technology Selection and Design written by Syed Q. A. Rizvi and published by . This book was released on 2009 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics and Chemistry in Lubrication written by A. Dorinson and published by Elsevier. This book was released on 1985-08-01 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although it is widely recognized that friction, wear and lubrication are linked together in a single interdisciplinary complex of scientific learning and technological practice, fragmented and specialized approaches still predominate. In this book, the authors examine lubrication from an interdisciplinary viewpoint. They demonstrate that once the treatment of lubrication is released from the confines of the fluid film concept, this interdisciplinary approach comes into full play. Tribological behavior in relation to lubrication is then examined from two major points of view: one is mechanical, not only with respect to the properties and behavior of the lubricant but also of the surfaces being lubricated. The other is chemical and encompasses the chemistry of the lubricant, the surfaces and the ambient surroundings. It is in the emphasis on the interaction of the basic mechanical and chemical processes in lubrication that this book differs from conventional treatments.
Download or read book Lubricant Blending and Quality Assurance written by R. David Whitby and published by CRC Press. This book was released on 2018-10-24 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people, including those involved in the manufacturing, marketing and selling of lubricants, believe that blending lubricants is simply a matter of putting one or more base oils and several additives into a tank of some kind and stirring them around to mix them. Blending lubricants that meet customers’ demands requires much more than this. The correct ingredients of the right quality need to be used in precisely controlled quantities. The ingredients need to be tested prior to blending and the finished products need to be tested following blending. The ingredients need to be stored and mixed under carefully controlled conditions. The finished lubricants need to be stored and packaged carefully and then delivered to customers correctly. This book discusses all of these issues, describes the different types of equipment used to blend lubricants, provides guidance on how best to use this equipment, and offers tips and techniques to help to avoid problems. It focuses on liquid lubricants. Greases are not discussed, as their manufacture involves very different manufacturing procedures compared with those concerned with liquid lubricants. The book starts with descriptions and discussion of the properties and characteristics of the main types of mineral and synthetic base oils, as well as the properties and characteristics of the main types of additives that are used in lubricant formulations. Criteria and methodologies used to design both new and upgraded blending plants are covered next. The types and operation of the equipment used in lubricant blending plants are described and discussed, together with a chapter on how to avoid problems before, during, and after blending. Testing and analysis of base oils, additives, and blended lubricants are covered in two separate chapters. Procedures for quality control and quality management in lubricant blending plants are also discussed in two separate chapters. Types of packages for lubricants are reviewed, together with methods for filling packages and methods for transporting lubricants in bulk. The storage of lubricants and supply chain management is also covered in depth.
Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2009-04-20 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost, environmental, and performance issues coupled with legislative changes, new engine oil requirements, and technology development for exploration of space and the oceans are changing the lubrication additive market. Reflecting how the need for new applications drives the development of new lubricant additives, Lubricant Additives: Chemistry and Applications, Second Edition presents methods to: Improve the performance, efficiency, and stability of lubricants Protect metal surfaces from wear Select lubricant additives for the food processing industry Select the most appropriate ashless additives Avoid microbial degradation of lubricants Lower toxicity And describes: Standard lubricant testing methods and product specifications Mechanisms and benefits of specific types of lubricant additives Recent industry trends Up-to-Date Coverage of Lubricant Additive Chemistry and Technology Addressing new trends in various industrial sectors and improvements in technology, this second edition provides detailed reviews of additives used in lubricant formulations, their chemistry, mechanisms of action, and trends for major areas of application. It explores the design of cost-effective, environmentally friendly lubricant technologies and lubricants for automotive, industrial, manufacturing, aerospace, and food-processing applications. An extensive list of online industry resources is available for download at crcpress.com.
Download or read book Lubricants and Lubrication written by Mang and published by John Wiley & Sons. This book was released on 2017-02-10 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: “Contains something for everyone involved in lubricant technology” — Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Thin Films in Tribology written by G. Dalmaz and published by Elsevier. This book was released on 1993-09-06 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tribological properties of relatively moving surfaces are greatly influenced by thin surface films which are of considerable importance in the design of machine components. From Victorian days when working lubricant films were calculated in tens of micrometres, to today when molecular dynamics simulations and even experiments are beginning to look at nanometre, single molecule thick films, the study of surfaces which is the tribologists' challenge has moved to finer and finer scales. The 66 papers in this volume provide reviews across the tribological field with thin films as their theme, giving a comprehensive and concise description on topics ranging from coatings and surface modification to bio-tribology. The articles provide the reader with an outline of their most effective application and potential uses in new technologies. The volume will be of interest not only to research workers and design engineers in the fields of new machine developments and lubrication, but also to engineers and students specialising in tribology.
