Download or read book Chemistry And Technology Of Alternate Fuels written by James G Speight and published by World Scientific. This book was released on 2020-10-14 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium covers unconventional fuel sources, i.e., sources other than crude oil and natural gas with the aim of presenting these sources as future alternates to fossil fuels. The contents of this must-have volume are important aspects of the non-fossil fuel sources of availability of alternate sources of fuels. The properties of these fuels are well documented and compared to other fuels from non-petroleum sources (such as tar sand, coal, and oil shale). The environmental effects of non-petroleum fuels will also be compared to other fuels in terms of current environmental regulations.
Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.
Download or read book Handbook of Alternative Fuel Technologies written by Sunggyu Lee and published by CRC Press. This book was released on 2007-03-23 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to enabling a clean and energy efficient future, alternative fuel sources are fast becoming a necessity for meeting today's growing demands for low-cost and convenient energy. The Handbook of Alternative Fuel Technologies offers a thorough guide to the science and available technologies for developing alternatives to petroleum fuel sour
Download or read book Alternative Fuels written by E. M. Goodger and published by John Wiley & Sons. This book was released on 1980 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternative Fuels written by Sunggyu Lee and published by CRC Press. This book was released on 1996-09-01 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmentally acceptable alternative fuels are in demand. This book dicusses the energy resources that are directly tied to the alleviation of petroleum dependence, and the science and technology in the area of alternative fuels. Various process treatments leading to cleaner and better use of existing fuel resources are discussed. This comprehensive reference book is consistent and is helpful for students and researchers.
Download or read book Advanced Technology for the Conversion of Waste into Fuels and Chemicals written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-07-27 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Volume 1: Biological Processes presents advanced and combined techniques that can be used to convert waste to energy, including combustion, gasification, paralysis, anaerobic digestion and fermentation. The book focuses on solid waste conversion to fuel and energy and presents the latest advances in the design, manufacture, and application of conversion technologies. Contributors from the fields of physics, chemistry, metallurgy, engineering and manufacturing present a truly trans-disciplinary picture of the field. Chapters cover important aspects surrounding the conversion of solid waste into fuel and chemicals, describing how valuable energy can be recouped from various waste materials. As huge volumes of solid waste are produced globally while huge amounts of energy are produced from fossil fuels, the technologies described in this comprehensive book provide the information necessary to pursue clean, sustainable power from waste material. Presents the latest advances in waste to energy techniques for converting solid waste to valuable fuel and energy Brings together contributors from physics, chemistry, metallurgy, engineering and the manufacturing industry Includes advanced techniques such as combustion, gasification, paralysis, anaerobic digestion and fermentation Goes far beyond municipal waste, including discussions on recouping valuable energy from a variety of industrial waste materials Describes how waste to energy technologies present an enormous opportunity for clean, sustainable energy
Download or read book Alternative Fuels Guidebook written by Richard L Bechtold and published by SAE International. This book was released on 1997-10-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals needed to understand the physical and chemical properties of alternative fuels, and how they impact refueling system design and the modification of existing garages for safety. It covers a wide range of fuels including alcohols, gases, and vegetable oils. Chapters cover: Alternative Fuels and Their Origins Properties and Specifications Materials Compatibility Storage and Dispensing Refueling Facility Installation and Garage Facility Modifications and more
Download or read book Alternate Liquid Fuels Technology written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Development and Applications and published by . This book was released on 1979 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuels and Engines written by Jean-Claude Guibet and published by Editions Technips. This book was released on 1999 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in extensive detail the new technologies that are currently in use or under development, which are designed to provide high-quality fuels and ensure their optimal use in the engines used to power automobiles, trucks, aircraft, and ships. All types of fuels are covered: gasolines, diesel fuels, liquefied petroleum gas, natural gas, biofuels, jet fuels, heavy fuels, and fuels for special uses. The evaluation criteria include vehicle performance and driveability, reduction in fossil fuel consumption, and environmental protection. The specific situations encountered in each region of the world (including the United States, Europe, Japan and the developing countries) are analyzed and compared, with a focus on energy, economics and politics. This book is a scientific work, yet easy to read; it is objective, yet actively involved. It is thus an excellent reference work for those seeking pertinent, reliable and comprehensive information on the the subject of fuels and engines.Volume 1Contents: 1. Physical properties and chemical characteristics of fuels. 2. Refining technologies. 3. Gasoline. 4. Diesel fuelVolume 2Contents: 5. Fuels, fuel consumption and environmental protection. 6. Alternatice fuels. 7. Special Fuels. 8. The Fuels and engines of tomorrow.
Download or read book Advances in Feedstock Conversion Technologies for Alternative Fuels and Bioproducts written by Majid Hosseini and published by Academic Press. This book was released on 2019-02-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Feedstock Conversion Technologies for Alternative Fuels and Bioproducts: New Technologies, Challenges and Opportunities highlights the novel applications of, and new methodologies for, the advancement of biological, biochemical, thermochemical and chemical conversion systems that are required for biofuels production. The book addresses the environmental impact of value added bio-products and agricultural modernization, along with the risk assessment of industrial scaling. The book also stresses the urgency in finding creative, efficient and sustainable solutions for environmentally conscious biofuels, while underlining pertinent technical, environmental, economic, regulatory and social issues. Users will find a basis for technology assessments, current research capability, progress, and advances, as well as the challenges associated with biofuels at an industrial scale, with insights towards forthcoming developments in the industry. Presents a thorough overview of new discoveries in biofuels research and the inherent challenges associated with scale-up Highlights the novel applications and advancements for biological, biochemical, thermochemical and chemical conversion systems that are required for biofuels production Evaluates risk management concerns, addressing the environmental impact of value added bio-products and agricultural modernization, and the risk assessment of industrial scaling
Download or read book Fuels and Fuel Additives written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-01-16 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines all stages of fuel production, from feedstocks to finished products Exploring chemical structures and properties, this book sheds new light on the current science and technology of producing energy efficient and environmentally friendly fuels. Moreover, it explains the role of fuel-additives in the production cycle. This expertly written and organized guide to fuels and fuel-additives also presents requirements, rules and regulations, including US and EU standards governing automotive emissions, fuel quality and specifications, alternate fuels, biofuels, antioxidants, deposit control detergents/dispersants, stabilizers, corrosion inhibitors, and polymeric fuel-additives. Fuels and Fuel-Additives covers all stages and facets of the production of engine fuels as well as heating and fuel oils. The book begins with a quick portrait of the future of fuels and fuel production. Then, it sets forth the regulations controlling exhaust gas emissions and fuel quality from around the world. Next, the book covers: Processing of engine fuels derived from crude oil, including the production of blending components Production of alternative fuels Fuel-additives for automotive engines Blending of fuels Key properties of motor fuels and their effects on engines and the environment Aviation fuels The final chapter of the book deals with fuel oils and marine fuels. Each chapter is extensively referenced, providing a gateway to the primary and secondary literature in the field. At the end of the book, a convenient glossary defines all the key terms used in the book. Examining the full production cycle from feedstocks to final products, Fuels and Fuel-Additives is recommended for students, engineers, and scientists working in fuels and energy production.
Download or read book Transport Fuels Technology written by E. M. Goodger and published by . This book was released on 2000 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport is fundamental for today's lifestyles. Speed and reliability demand powered propulsion, which is why suitable fuels are so vital. This volume contains preliminary reviews of the basic sciences, followed by in-depth discussions of the sources, processing, properties, handling, combustion performance, and emissions of both conventional and alternative fuel types. It concludes with a reasoned assessment of transport prospects for the future. 8 Chapters Cover: **Hydrocarbon Chemistry**--outlines the configurations of the various groups of hydrocarbon molecules, illustrating the structural bonding involved and demonstrating the influence of these factors on fuel properties and reactions. **Engineering Thermodynamics**--details the construction of cyclic processes that can be followed by gases in order to accept heat and then convert a substantial proportion of it to mechanical work. **Combustion Principles**--examines the principles underpinning combustion processes and the concept of flammability. **Conventional Fuels**--discusses conventional fuels such as gasoline for spark-ignition piston engines; kerosine for gas turbine engines in large aircraft; gas oil for high-speed compression ignition piston engines; diesel fuel and residual fuel for low-speed compression-ignition engines in ships and for the generation of electrical power; and coal in regard to its use in power stations and its potential for conversion to liquids. **Combustion Performance**--draws together the main features of the first three basic chapters by illustrating the combustion performance of fuels burnt in heat engines. **Alternative Fuels**--examines the remaining lifetimes of the major hydrocarbon sources, such as petroleum, natural gas and coal. It also outlines the manufacture, properties, and performance of various alternative fuels. **Overview of Conventional Fuels**--provides a review of the conventional fuels used in various sectors of light vehicle transport, motor racing, aerospace, fleet operation and rail transport, and the marine world. **Global Issues Affecting Transport**--presents methods of energy prediction that reflect the dynamics of global supply and the influence of new technologies. Transport Fuels Technology: Mobility for the Millennium
Download or read book Ethanol As a Green Alternative Fuel written by Helen Treichel and published by . This book was released on 2019 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: In face of the increasingly obvious need to ensure the sustainability of the environment, alternative and renewable energy sources are no longer just the concern of environmentalists and have become commitments of governments virtually everywhere in the world. In this context, ethanol emerges as an excellent substitute for petroleum derivatives. This green alternative fuel is sustained by its own burning because when CO2 serves as a carbon source for the growth of plants, it will allow the carbohydrates to be fermented. In addition, currently different generations of this fuel are being proposed, considering the utilization of their own waste. However, challenges still need to be overcome to enable the second, third and fourth generations of ethanol. At the same time, other renewable fuel alternatives emerge to compete with it. The automobile industry, for example, has been developing new engines, hybrids or not, that can be powered by electricity or H2. In this regard, this book addresses, under different aspects, the main strategies to surpass the remaining obstacles, as well as the advantages and disadvantages of ethanol as a fuel of the future. In this context, the "Ethanol as a Green Alternative Fuel" book shows present and future scenarios about bioethanol and perspective in their chain, considering the economic and environmental impact mitigations approach.
Download or read book Prospects of Alternative Transportation Fuels written by Akhilendra P Singh and published by Springer. This book was released on 2017-11-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses different types of alternative fuels, including biodiesel, alcohol, synthetic fuels, compressed natural gas (CNG) and its blend with hydrogen, HCNG, and provides detailed information on the utilization of these alternative fuels in internal combustion (IC) engines. Further, it presents methods for production of these alternative fuels and explores advanced combustion techniques, such as low-temperature and dual-fuel combustion, using alternative fuels. It includes a chapter on the soot morphology of biodiesel, which focuses on the toxicity. There are also four chapters on hydrogen-fueled engines, which discuss use of hydrogen in IC engines and also provide important information on the methodologies. This book is a valuable resource for researchers and practicing engineers alike.
Download or read book Carbon Neutral Fuels and Energy Carriers written by Nazim Z. Muradov and published by CRC Press. This book was released on 2011-09-07 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concerns over an unstable energy supply and the adverse environmental impact of carbonaceous fuels have triggered considerable efforts worldwide to find carbon-free or low-carbon alternatives to conventional fossil fuels. Carbon-Neutral Fuels and Energy Carriers emphasizes the vital role of carbon-neutral energy sources, transportation fuels, and associated technologies for establishing a sustainable energy future. Each chapter draws on the insight of world-renowned experts in such diverse fields as photochemistry and electrochemistry, solar and nuclear energy, biofuels and synthetic fuels, carbon sequestration, and alternative fuel vehicles. After an introductory chapter on different energy options in a carbon-constrained world and proposed measures to stabilize atmospheric CO2, the book analyzes the advantages and challenges facing the introduction of hydrogen fuel to the marketplace. It then examines the role of nuclear power in the production of carbon-free energy and fuels as well as the efficient use and storage of renewable energy resources, emphasizing the production of solar fuels from water and CO2. The book also discusses different aspects of bioenergy and biofuels production and use and the potential role of bio-inspired energy systems and industrial processes. The final chapters present a thorough overview and analysis of state-of-the-art fossil fuel decarbonization technologies and clean transportation options. This authoritative work provides the information needed to make more informed choices regarding available clean energy and fuel alternatives. It helps readers to better understand the interconnection between energy and the environment as well as the potential impact of human activities on climate.
Download or read book The Chemistry and Technology of Petroleum written by James G. Speight and published by CRC Press. This book was released on 2006-10-31 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refineries must not only adapt to evolving environmental regulations for cleaner product specifications and processing, but also find ways to meet the increasing demand for petroleum products,particularly for liquid fuels and petrochemical feedstocks. The Chemistry and Technology of Petroleum, Fourth Edition offers a 21st century perspective
Download or read book Alternative Fuels written by Timothy J Maxwell and published by SAE International. This book was released on 1994-12-01 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written primarily for fleet management personnel with purchasing, maintenance, or operations responsibilities, Alternative Fuels: Emissions, Economics, and Performance provides essential information for those who are considering adding alternatively-fueled vehicles to their fleets. Readers will gain a solid understanding of the fundamentals of alternative fuels and the factors that need to be considered when evaluating their use. No prior knowledge of alternative fuels is necessary. Basic information on the various alternative fuels and objective data on the costs of converting, fueling, and operating alternatively-fueled vehicles is covered in this book. Fuel cost, performance, reliability, and availability are addressed. The book also discusses the 1990 amendments to the Clean Air Act and the 1992 Comprehensive National Energy Policy Act. A summary of Texas' state law, considered to be representative of state legislation on alternative fuels and a glossary of key terms, are also included. Eight chapters cover: Review of Engine Technology; Characteristics of Alternative Fuels; Conversion of Spark Ignition Engines; Conversion of Compression Ignition Engines; Refueling Facilities; Legislation and Policies; and Cost Considerations. The book is also an ideal introduction to the topic for legislators, administrators, educators, and anyone interested in learning more about alternate fuels.
