Download or read book Chemical Bonding at Surfaces and Interfaces written by Anders Nilsson and published by Elsevier. This book was released on 2011-08-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. - Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts - This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component - Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing - Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces

Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Download or read book Advanced Chemistry of Monolayers at Interfaces written by Toyoko Imae and published by Elsevier. This book was released on 2007-04-20 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Chemistry of Monolayers at Interfaces describes the advanced chemistry of monolayers at interfaces. Focusing on the recent trends of methodology and technology, which are indispensable in monolayer science. They are applied to monolayers of surfactants, amphiphiles, polymers, dendrimers, enzymes, and proteins, which serve many uses. Introduces the methodologies of scanning probe microscopy, surface force instrumentation, surface spectroscopy, surface plasmon optics, reflectometry, and near-field scanning optical microscopy. Modern interface reaction method, lithographic technology and different types of monolayers like adsorption, Langmuir and Langmuir-Blodgett monolayers at air/liquid, liquid/liquid, liquid/solid and air/solid interfaces, are all covered. Introducing novel methodologies and technologies Covering the different types of monolayers Discusses all currently available instrumental techniques for studying all types of monolayer

Download or read book Chemistry of Functional Materials Surfaces and Interfaces written by Andrei Honciuc and published by Elsevier. This book was released on 2021-03-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Functional Materials Surfaces and Interfaces: Fundamentals and Applications gives a descriptive account of interfacial phenomena step-by-step, from simple to complex, to provide readers with a strong foundation of knowledge in interfacial materials chemistry. Many case studies are provided to give real-world examples of problems and their solutions, allowing readers to make the connection between fundamental understanding and applications. Emerging applications in nanomaterials and nanotechnology are also discussed. Throughout the book, the author explains the common interface and surface equations, models, methods, and applications in the creation of functional materials. The goal of Chemistry of Functional Materials Surfaces and Interfaces is to provide readers with the basic understanding of the common tools of surface and interface chemistry for application in materials science and nanotechnology. This book is suitable for researchers and practitioners in the disciplines of materials science and engineering and surface and interface chemistry. Includes numerous real-world examples and case studies throughout Addresses emerging applications of interfacial materials chemistry in nanomaterials and nanotechnology Provides the foundational concepts of surface and interfacial science with models, equation, and methods

Download or read book Physics and Chemistry of III V Compound Semiconductor Interfaces written by Carl Wilmsen and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of the 111-V compound semiconductors to device fabrica tion has grown considerably in the last few years. This process has been stimulated, in part, by the advancement in the understanding of the interface physics and chemistry of the III-V's. The literature on this subject is spread over the last 15 years and appears in many journals and conference proceedings. Understanding this literature requires consider able effort by the seasoned researcher, and even more for those starting out in the field or by engineers and scientists who wish to apply this knowledge to the fabrication of devices. The purpose of this book is to bring together much of the fundamental and practical knowledge on the physics and chemistry of the 111-V compounds with metals and dielectrics. The authors of this book have endeavored to provide concise overviews of these areas with many tahles ancI grarhs whic. h c. omr>are and summarize the literature. In this way, the book serves as both an insightful treatise on III-V interfaces and a handy reference to the literature. The selection of authors was mandated by the desire to include both fundamental and practical approaches, covering device and material aspects of the interfaces. All of the authors are recognized experts on III-V interfaces and each has worked for many years in his subject area. This experience is projected in the breadth of understanding in each chapter.

Download or read book Electrified Interfaces in Physics Chemistry and Biology written by R Guidelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrified interfaces span from metaVsemiconductor and metaVelectrolyte interfaces to disperse systems and biological membranes, and are notably important in so many physical, chemical and biological systems that their study has been tackled by researchers with different scientific backgrounds using different methodological approaches. The various electrified interfaces have several common features. The equilibrium distribution of positive and negative ions in an electrolytic solution is governed by the same Poisson-Boltzmann equation independent of whether the solution comes into contact with a metal, a colloidal particle or a biomembrane, and the same is true for the equilibrium distribution of free electrons and holes of a semiconductor in contact with a different conducting phase. Evaluation of electric potential differences across biomembranes is based on the same identity of electrochemical potentials which holds for a glass electrode and which yields the Nernst equation when applied to a metal/solution interface. The theory of thermally activated electron tunneling, which was developed by Marcus, Levich, Dogonadze and others to account for electron transfer across metaVelectrolyte interfaces, is also applied to light induced charge separation and proton translocation reactions across intercellular membranes. From an experimental viewpoint, the same electrochemical and in situ spectroscopic techniques can equally well be employed for the study of apparently quite different electrified interfaces.

Download or read book Chemistry of the Cell Interface Part B written by Harry Brown and published by Elsevier. This book was released on 2012-12-02 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of the Cell Interface, Part B deals with the relationship of structure to biochemical reactions. This book is divided into three chapters. Chapter VI focuses on the water's contribution to the reaction systems, emphasizing the nature of the cell's aqueous phases. The matrix-supported enzymes, technology of the model, and properties of enzymes bound to polymeric matrices that have been contrasted with solution and membrane particle systems are elaborated in Chapter VII. The last chapter focuses on the aspects of protein chemistry pertinent to the design of interface experimental systems. Other topics include the structure of water near interfaces, functional role of water in biological systems, and adsorbed and ionically bonded enzymes. The enzymes insolubilized by the use of bridging compounds and changes in protein conformation associated with chemical modification are likewise covered in this text. This publication is a good source for morphologists, chemists, and specialists of disciplines related to the chemistry of cell interface.

Download or read book Biomolecular Interfaces written by Ariel Fernández Stigliano and published by Springer. This book was released on 2015-04-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the aqueous interface of biomolecules, a vital yet overlooked area of biophysical research. Most biological phenomena cannot be fully understood at the molecular level without considering interfacial behavior. The author presents conceptual advances in molecular biophysics that herald the advent of a new discipline, epistructural biology, centered on the interactions of water and bio molecular structures across the interface. The author introduces powerful theoretical and computational resources in order to address fundamental topics such as protein folding, the physico-chemical basis of enzyme catalysis and protein associations. On the basis of this information, a multi-disciplinary approach is used to engineer therapeutic drugs and to allow substantive advances in targeted molecular medicine. This book will be of interest to scientists, students and practitioners in the fields of chemistry, biophysics and biomedical engineering.

Download or read book Diamond Films written by Koji Kobashi and published by Elsevier. This book was released on 2010-07-07 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Discusses the most advanced techniques for diamond growth - Assists diamond researchers in deciding on the most suitable process conditions - Inspires readers to devise new CVD (chemical vapor deposition Ever since the early 1980s, and the discovery of the vapour growth methods of diamond film, heteroexpitaxial growth has become one of the most important and heavily discussed topics amongst the diamond research community. Kobashi has documented such discussions with a strong focus on how diamond films can be best utilised as an industrial material, working from the premise that crystal diamond films can be made by chemical vapour disposition. Kobashi provides information on the process and characterization technologies of oriented and heteroepitaxial growth of diamond films.

Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.

Download or read book Metal Ceramic Interfaces written by M. Rühle and published by Elsevier. This book was released on 2013-10-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomistics of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.

Download or read book Chemical Structure of Pelagic Redox Interfaces written by Evgeniy V. Yakushev and published by Springer. This book was released on 2012-09-14 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades many studies have focused on the oxygen depletion of coastal and oceanic waters. An understanding of the processes involved is fundamental to assess the effects of global and climatic changes and to support an ecosystem approach to adaptive environmental management for coastal seas and ocean basins. This timely book presents the state-of-the-art of our knowledge of the nature and chemical structure of redox interfaces in a marine water column, oxygen depletion and connected processes. The structures of the redox layers, including the distribution of certain parameters and microbiological features, are described in detail. The volume also covers studies devoted to the interannual variability of some oxygen-depleted systems, modeling and new developments in observation techniques. In addition, it identifies remaining gaps in our knowledge of the cycling of chemical elements in changing redox conditions. The chapters are based on extensive observational data, collected by the authors during sea and shore expeditions, on archive data, and on a broad range of scientific literature.

Download or read book Conjugated Polymer And Molecular Interfaces written by William R. Salaneck and published by CRC Press. This book was released on 2001-10-18 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defines the state-of-the-art in interface science for electronic applications of organic materials. Updates understanding of the foundaiton of interfacial properties. Describes novel electronic devices created from conjugated polymers and organic molecular solids.

Download or read book Liquid Surfaces and Interfaces written by Peter S. Pershan and published by Cambridge University Press. This book was released on 2012-08-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for graduate students and researchers on all aspects of x-ray scattering experiments on liquid surfaces and interfaces.

Download or read book The Physics and Chemistry of SiO2 and the Si SiO2 Interface 3 1996 written by Hisham Z. Massoud and published by . This book was released on 1996 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Colloid and Interface Chemistry for Nanotechnology written by Peter Kralchevsky and published by CRC Press. This book was released on 2016-04-19 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and interface science dealt with nanoscale objects for nearly a century before the term nanotechnology was coined. An interdisciplinary field, it bridges the macroscopic world and the small world of atoms and molecules. Colloid and Interface Chemistry for Nanotechnology is a collection of manuscripts reflecting the activities of research te

Download or read book The Physics and Chemistry of SiO2 and the Si SiO2 Interface 2 written by B.E. Deal and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international symposium on the subject "The Physics and Chemistry of Si02 and the Si-Si02 Interface," organized in association with the Electrochemical Society, Inc. , was held in Atlanta, Georgia on May 15- 20, 1988. This symposium contained sixty papers and was so successful that the sponsoring divisions decided to schedule it on a regular basis every four years. Thus, the second symposium on "The Physics and Chemistry of Si02 and the Si02 Interface was held May 18-21, 1992 in St. Louis, Missouri, again sponsored by the Electronics and Dielectrics Science and Technology Divisions of The Electrochemical Society. This volume contains manuscripts of most of the fifty nine papers presented at the 1992 symposium, and is divided into eight chapters - approximating the organization of the symposium. Each chapter is preceded with an introduction by the session organizers. It is appropriate to provide a general assessment of the current status and understanding of the physics and chemistry of Si02 and the Si02 interface before proceeding with a brief overview of the individual chapters. Semiconductor devices have continued to scale down in both horizontal and vertical dimensions. This has resulted in thinner gate and field oxides as well as much closer spacing of individual device features. As a result, surface condition, native oxide composition, and cleaning and impurity effects now provide a much more significant contribution to the properties of oxides and their interfaces.