Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.

Download or read book Ground Water Recharge Using Waters of Impaired Quality written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: As demand for water increases, water managers and planners will need to look widely for ways to improve water management and augment water supplies. This book concludes that artificial recharge can be one option in an integrated strategy to optimize total water resource management and that in some cases impaired-quality water can be used effectively as a source for artificial recharge of ground water aquifers. Source water quality characteristics, pretreatment and recharge technologies, transformations during transport through the soil and aquifer, public health issues, economic feasibility, and legal and institutional considerations are addressed. The book evaluates three main types of impaired quality water sourcesâ€"treated municipal wastewater, stormwater runoff, and irrigation return flowâ€"and describes which is the most consistent in terms of quality and quantity. Also included are descriptions of seven recharge projects.

Download or read book Chemicals used for treatment of water intended for human consumption ozone written by and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ozone in Water Treatment written by Am Water Works Res F and published by CRC Press. This book was released on 1991-02-13 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of the Safe Drinking Water Act Amendments of 1986, many water utilities are reexamining their water treatment practices. Upcoming new regulations on disinfection and on disinfection by-products, in particular, are the primary driving forces for the big interest in ozone. It appears that ozone, with its strong disinfection capabilities, and apparently lower levels of disinfection by-products (compared to other disinfectants), may be the oxidant/disinfectant of choice. Many utilities currently using chlorine for oxidation may need to switch due to chlorine by-product concerns. Utilities using chloramines may need to use ozone to meet CT requirements. This book, prepared by 35 international experts, includes current technology on the design, operation, and control of the ozone process within a drinking water plant. It combines almost 100 years of European ozone design and operating experience with North American design/operations experience and the North American regulatory and utility operational environment. Topics covered include ozone chemistry, toxicology, design consideration, engineering aspects, design of retrofit systems, and the operation and economics of ozone technology. The book contains a "how to" section on ozone treatability studies, which explains what information can be learned using treatability studies, at what scale (bench, pilot, or demonstration plant), and how this information can be used to design full-scale systems. It also includes valuable tips regarding important operating practices, as well as guidance on retrofits and the unique issues involved with retrofitting the ozone process. With ozone being one of the hottest areas of interest in drinking water, this book will prove essential to all water utilities, design engineers, regulators, and plant managers and supervisors.

Download or read book Ozone in Drinking Water Treatment written by Kerwin L. Rakness and published by American Water Works Association. This book was released on 2011-01-12 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry of Ozone in Water and Wastewater Treatment written by Clemens von Sonntag and published by IWA Publishing. This book was released on 2012-08-31 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even though ozone has been applied for a long time for disinfection and oxidation in water treatment, there is lack of critical information related to transformation of organic compounds. This has become more important in recent years, because there is considerable concern about the formation of potentially harmful degradation products as well as oxidation products from the reaction with the matrix components. In recent years, a wealth of information on the products that are formed has accumulated, and substantial progress in understanding mechanistic details of ozone reactions in aqueous solution has been made. Based on the latter, this may allow us to predict the products of as yet not studied systems and assist in evaluating toxic potentials in case certain classes are known to show such effects. Keeping this in mind, Chemistry of Ozone in Water and Wastewater Treatment: From Basic Principles to Applications discusses mechanistic details of ozone reactions as much as they are known to date and applies them to the large body of studies on micropollutant degradation (such as pharmaceuticals and endocrine disruptors) that is already available. Extensively quoting the literature and updating the available compilation of ozone rate constants gives the reader a text at hand on which his research can be based. Moreover, those that are responsible for planning or operation of ozonation steps in drinking water and wastewater treatment plants will find salient information in a compact form that otherwise is quite disperse. A critical compilation of rate constants for the various classes of compounds is given in each chapter, including all the recent publications. This is a very useful source of information for researchers and practitioners who need kinetic information on emerging contaminants. Furthermore, each chapter contains a large selection of examples of reaction mechanisms for the transformation of micropollutants such as pharmaceuticals, pesticides, fuel additives, solvents, taste and odor compounds, cyanotoxins. Authors: Prof. Dr. Clemens von Sonntag, Max-Planck-Institut für Bioanorganische Chemie, Mülheim an der Ruhr, and Instrumentelle Analytische Chemie, Universität Duisburg-Essen, Essen, Germany and Prof. Dr. Urs von Gunten, Eawag, Swiss Federal Institute of Aquatic Science and Technology, Dübendorf, and Ecole Polytechnique Federal de Lausanne, Lausanne, Switzerland.

Download or read book Management of Legionella in Water Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-02-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.

Download or read book An Assessment of Ozone and Chlorine Dioxide Technologies for Treatment of Municipal Water Supplies written by G. Wade Miller and published by . This book was released on 1978 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Safety of Drinking water written by Terrence Thompson and published by WHO. This book was released on 2007 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination of drinking-water is a significant concern for public health throughout the world. Microbial hazards make the largest contribution to waterborne disease in developed and developing countries. Nevertheless, chemicals in water supplies can cause serious health problems--whether the chemicals are naturally occurring or derive from sources of pollution. At a global scale, fluoride and arsenic are the most significant chemicals, each affecting perhaps millions of people. However, many other chemicals can be important contaminants of drinking-water under specific local conditions. Often, identification and assessment of risks to health from drinking-water relies excessively on analysis of water samples. The limitations of this approach are well recognized, and contributed to the delay in recognizing arsenic in drinking-water as a significant health concern in Bangladesh and elsewhere. To overcome such limitations, the latest edition of the World Health Organization (WHO) Guidelines for Drinking-water Quality (WHO, 2004; WHO,2006) emphasizes effective preventive management through a 'framework for drinking-water safety' that incorporates 'water safety plans.' Effective preventive management of chemicals in drinking-water requires simple tools for distinguishing the few chemicals of potential local or national concern from the unmanageably long list of chemicals of possible significance. The aim is to identify and prioritize the chemicals of concern, to overcome the limitations of direct analysis of water quality, and ensure that limited resources are allocated towards the monitoring, assessment and control of the chemicals that pose the greatest health risks. Identifying and prioritizing chemical risks presents a challenge, especially in developing countries, because information on the presence of chemicals in water supplies is often lacking. This document provides guidance to help readers to meet that challenge. It shows how information on aspects such as geology and industrial and agricultural development, which is often readily available, can be used to identify potential chemical contaminants (and potential sources of chemicals), from catchment to consumer, and thus prioritize risks. As a supporting document to the Guidelines for Drinking-water Quality (WHO, 2004; WHO, 2006), this publication is aimed at policy-makers, regulators, managers and public health practitioners at national and local level. It is divided into three parts: Part A provides general guidance on using limited information in prioritizing chemicals in drinking-water for risk management. The need for such guidance is outlined in Chapter 1,which also describes the administrative and policy context. Chapter 2 describes the principles applied in prioritizing chemicals, provides information on some factors that affect chemical concentrations along pathways, and highlights several specific chemicals that are frequently considered priorities because of their widespread occurrence or significant health effects. Chapter 3 discusses the role of drinking-water standards and guidelines, and provides an overview of contemporary water quality management procedures. Part B provides practical guidance on identifying specific chemicals that are likely to be of concern in individual water supply systems. It groups chemical contaminants into five categories on the basis of their potential sources: naturally occurring, from agriculture activities, from human settlements, from industrial activities, and from water treatment and distribution processes themselves. Part C comprises the appendices. It includes guidance on the most likely sources of potential contaminants and on identifying chemicals that could be of concern in particular circumstances. The appendices address potential sources of chemicals considered in the WHO drinking-water guidelines (WHO, 2004; WHO, 2006), chemicals potentially discharged in effluents from industrial sources, and the association of pesticides with crops and crop types. This information is presented in an accessible format that will help users to determine the chemical hazards that can arise in the catchment, in treatment and in distribution, in large, medium and small water supplies. Many experts worldwide contributed to this work over a period of several years, beginning with the 1st Meeting of Experts on Monitoring Chemicals in Drinking Water, held in Bangkok, Thailand, in January 2001. This was followed by the 2nd Meeting of Experts on Monitoring Chemicals in Drinking Water, also held in Bangkok, in December 2001. Both meetings were sponsored by WHO and hosted by the Department of Health, Ministry of Public Health, Thailand. The draft guidance document was subsequently tested in a series of field trials in 2002-2003 in Indonesia, Fiji, Nepal, Mongolia, the Philippines and Thailand. Lessons learnt through the field trials provided feedback that was valuable in revising and finalizing the document. Readers should note that while this publication has been developed as a supporting document for, and with reference to, the Guidelines for Drinking-water Quality, the guidelines themselves are frequently updated and the latest information should always be sought by reference to relevant World Health Organization publications and web site. (http://www.who.int/water_sanitation_health/dwq/guidelines/en/index.html).

Download or read book EPA 600 9 written by and published by . This book was released on 1975-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water Reuse written by National Research Council and published by National Academies Press. This book was released on 2012-07-17 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding water reuse-the use of treated wastewater for beneficial purposes including irrigation, industrial uses, and drinking water augmentation-could significantly increase the nation's total available water resources. Water Reuse presents a portfolio of treatment options available to mitigate water quality issues in reclaimed water along with new analysis suggesting that the risk of exposure to certain microbial and chemical contaminants from drinking reclaimed water does not appear to be any higher than the risk experienced in at least some current drinking water treatment systems, and may be orders of magnitude lower. This report recommends adjustments to the federal regulatory framework that could enhance public health protection for both planned and unplanned (or de facto) reuse and increase public confidence in water reuse.

Download or read book Ozonation of Water and Waste Water written by Christiane Gottschalk and published by John Wiley & Sons. This book was released on 2009-12-09 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The leading resource on ozone technology, this book contains everything from chemical basics to technical and economic concerns. The text has been updated to include the latest developments in water treatment and industrial processes. Following an introduction, the first part looks at toxicology, reaction mechanisms and full-scale applications, while Part B covers experimental design, equipment and analytical methods, mass transfer, reaction kinetics and the application of ozone in combined processes.

Download or read book Guidance Manual for Compliance with the Filtration and Disinfection Requirements for Public Water Systems Using Surface Water Sources written by David J. Hiltebrand and published by . This book was released on 1991 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual suggests design operating and performance criteria for specific surface water quality conditions to provide the optimum protection from microbiological contaminants.

Download or read book Comprehensive Water Quality and Purification written by and published by Elsevier. This book was released on 2013-09-24 with total page 1537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Water Quality and Purification, Four Volume Set provides a rich source of methods for analyzing water to assure its safety from natural and deliberate contaminants, including those that are added because of carelessness of human endeavors. Human development has great impact on water quality, and new contaminants are emerging every day. The issues of sampling for water analysis, regulatory considerations, and forensics in water quality and purity investigations are covered in detail. Microbial as well as chemical contaminations from inorganic compounds, radionuclides, volatile and semivolatile compounds, disinfectants, herbicides, and pharmaceuticals, including endocrine disruptors, are treated extensively. Researchers must be aware of all sources of contamination and know how to prescribe techniques for removing them from our water supply. Unlike other works published to date that concentrate on issues of water supply, water resource management, hydrology, and water use by industry, this work is more tightly focused on the monitoring and improvement of the quality of existing water supplies and the recovery of wastewater via new and standard separation techniques Using analytical chemistry methods, offers remediation advice on pollutants and contaminants in addition to providing the critical identification perspective The players in the global boom of water purification are numerous and varied. Having worked extensively in academia and industry, the Editor-in-Chief has been careful about constructing a work for a shared audience and cause

Download or read book Identifying Future Drinking Water Contaminants written by National Research Council and published by National Academies Press. This book was released on 1999-09-30 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an increasing population, use of new and diverse chemicals that can enter the water supply, and emergence of new microbial pathogens, the U.S. federal government is faced with a regulatory dilemma: Where should it focus its attention and limited resources to ensure safe drinking water supplies for the future? Identifying Future Drinking Water Contaminants is based on a 1998 workshop on emerging drinking water contaminants. It includes a dozen papers that were presented on new and emerging microbiological and chemical drinking water contaminants, associated analytical and water treatment methods for their detection and removal, and existing and proposed environmental databases to assist in their proactive identification and regulation. The papers are preceded by a conceptual approach and related recommendations to EPA for the periodic creation of future Drinking Water Contaminant Candidate Lists (CCLsâ€"produced every five yearsâ€"include currently unregulated chemical and microbiological substances that are known or anticipated to occur in public water systems and that may pose health risks).

Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.

Download or read book Gases in Agro food Processes written by Remy Cachon and published by Academic Press. This book was released on 2019-09-12 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gases in Agro-food Processes is the ultimate reference covering all applications of gases in agro-Food processes, from farm to fork. Divided into 11 sections, the book covers chemical and physical gas properties, gas monitoring, regulation, heat and mass transfers. Sections are dedicated to agriculture and food processing, wastewater treatment, safety applications and market trends. Users will find this to be a valuable resource for industrial scientists and researchers in technical centers who are developing agro-food products. In addition, the book is ideal for graduate students in agro-food science, chemistry and the biosciences. - Explores quality, safety, regulatory aspects and market conditions, along with an industry outlook on gases used in agro-food processes - Presents the application areas of gases in industries and explores the basic principles for each application - Provides a single-volume reference on the wide range of potential uses for gases, facilitating use-case comparison and selection considerations - Includes sections dedicated to agriculture and food processing, wastewater treatment, safety applications and market trends