Download or read book Coagulation and Flocculation in Water and Wastewater Treatment written by John Bratby and published by IWA Publishing. This book was released on 2006-10-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.
Download or read book Economic Evaluation of the Proposed Interim Primary Drinking Water Regulations written by Energy Resources Co and published by . This book was released on 1975 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemicals Used for Treatment of Water Intended for Human Consumption written by British Standards Institution and published by . This book was released on 1999 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.
Download or read book Chemicals Used for Treatment of Water Intended for Human Consumption Hexafluorosilicic Acid written by British Standards Institution and published by . This book was released on 2022 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kirk Othmer Concise Encyclopedia of Chemical Technology 2 Volume Set written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-07-16 with total page 2762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easily-accessible two-volume encyclopedia summarizing all the articles in the main volumes Kirk-Othmer Encyclopedia of Chemical Technology, Fifth Edition organized alphabetically. Written by prominent scholars from industry, academia, and research institutions, the Encyclopedia presents a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field.
Download or read book Chemistry of Water Treatment Second Edition written by Samuel D. Faust and published by CRC Press. This book was released on 1998-07-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition demonstrates how chemistry influences the design of water treatment plants and how it should influence the design. Historically, water treatment plants have been designed from hydraulic considerations with little regard to chemical aspects. The many chemical reactions used for removal of pollutants from water simply cannot be forced to occur within current designs. This book re-examines this traditional approach in light of today's water quality and treatment. Will current water treatment processes be sufficient to meet future demands or will new processes have to be devised? Chemistry of Water Treatment assesses the chemical and physical efficacies of current processes to meet the demands of the Safe Drinking water Act, providing expert information to persons responsible for the production of potable water into the next century.
Download or read book Chemicals Used for Treatment of Water Intended for Human Consumption Iron III Sulfate Liquid written by British Standards Institute Staff and published by . This book was released on 2004-12 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water treatment, Potable water, Ferric inorganic compounds, Sulfates, Liquids, Chemical properties, Physical properties of materials, Impurities, Safety measures, Delivery, Quality, Marking, Chemical analysis and testing
Download or read book Federal Register written by and published by . This book was released on 1980-01-14 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Treatment Manuals written by and published by . This book was released on 2002 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Products and Services Catalogue written by and published by . This book was released on 2000 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Chemistry written by Muhammad A. Hanif and published by John Wiley & Sons. This book was released on 2020-11-03 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive and up-to-date volume on environmental chemistry available today, this is the standard reference for any chemical or environmental engineer. This book is a very comprehensive project designed to provide complete information about environmental chemistry, including air, water, soil and all life forms on earth. The complete chemical composition and all the essential components of the atmosphere, hydrosphere, geosphere, lithosphere and biosphere are discussed in detail. Numerous forms of pollutants and their toxic effects along with sustainable solutions are provided. Not just covering the basics of environmental chemistry, the authors discuss many specific areas and issues, and they provide practical solutions. The problems of non-renewable energy processes and the merits of renewable energy processes along with future fuels are discussed in detail, making this volume a comprehensive collaboration of many other relevant fields which tries to fill the knowledge gap of all previously available books on the market. It also thoroughly covers all environment-related issues, internationally recognized standard values, and the socioeconomic impacts on society for the short and long term. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.
Download or read book In Situ Chemical Oxidation for Groundwater Remediation written by Robert L. Siegrist and published by Springer Science & Business Media. This book was released on 2011-02-25 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides comprehensive up-to-date descriptions of the principles and practices of in situ chemical oxidation (ISCO) for groundwater remediation based on a decade of intensive research, development, and demonstrations, and lessons learned from commercial field applications.
Download or read book Technologies for Upgrading Existing Or Designing New Drinking Water Treatment Facilities written by and published by . This book was released on 1990 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual of Small Public Water Supply Systems written by United States. Environmental Protection Agency and published by . This book was released on 1991 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Safety of Drinking water written by Terrence Thompson and published by WHO. This book was released on 2007 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination of drinking-water is a significant concern for public health throughout the world. Microbial hazards make the largest contribution to waterborne disease in developed and developing countries. Nevertheless, chemicals in water supplies can cause serious health problems--whether the chemicals are naturally occurring or derive from sources of pollution. At a global scale, fluoride and arsenic are the most significant chemicals, each affecting perhaps millions of people. However, many other chemicals can be important contaminants of drinking-water under specific local conditions. Often, identification and assessment of risks to health from drinking-water relies excessively on analysis of water samples. The limitations of this approach are well recognized, and contributed to the delay in recognizing arsenic in drinking-water as a significant health concern in Bangladesh and elsewhere. To overcome such limitations, the latest edition of the World Health Organization (WHO) Guidelines for Drinking-water Quality (WHO, 2004; WHO,2006) emphasizes effective preventive management through a 'framework for drinking-water safety' that incorporates 'water safety plans.' Effective preventive management of chemicals in drinking-water requires simple tools for distinguishing the few chemicals of potential local or national concern from the unmanageably long list of chemicals of possible significance. The aim is to identify and prioritize the chemicals of concern, to overcome the limitations of direct analysis of water quality, and ensure that limited resources are allocated towards the monitoring, assessment and control of the chemicals that pose the greatest health risks. Identifying and prioritizing chemical risks presents a challenge, especially in developing countries, because information on the presence of chemicals in water supplies is often lacking. This document provides guidance to help readers to meet that challenge. It shows how information on aspects such as geology and industrial and agricultural development, which is often readily available, can be used to identify potential chemical contaminants (and potential sources of chemicals), from catchment to consumer, and thus prioritize risks. As a supporting document to the Guidelines for Drinking-water Quality (WHO, 2004; WHO, 2006), this publication is aimed at policy-makers, regulators, managers and public health practitioners at national and local level. It is divided into three parts: Part A provides general guidance on using limited information in prioritizing chemicals in drinking-water for risk management. The need for such guidance is outlined in Chapter 1,which also describes the administrative and policy context. Chapter 2 describes the principles applied in prioritizing chemicals, provides information on some factors that affect chemical concentrations along pathways, and highlights several specific chemicals that are frequently considered priorities because of their widespread occurrence or significant health effects. Chapter 3 discusses the role of drinking-water standards and guidelines, and provides an overview of contemporary water quality management procedures. Part B provides practical guidance on identifying specific chemicals that are likely to be of concern in individual water supply systems. It groups chemical contaminants into five categories on the basis of their potential sources: naturally occurring, from agriculture activities, from human settlements, from industrial activities, and from water treatment and distribution processes themselves. Part C comprises the appendices. It includes guidance on the most likely sources of potential contaminants and on identifying chemicals that could be of concern in particular circumstances. The appendices address potential sources of chemicals considered in the WHO drinking-water guidelines (WHO, 2004; WHO, 2006), chemicals potentially discharged in effluents from industrial sources, and the association of pesticides with crops and crop types. This information is presented in an accessible format that will help users to determine the chemical hazards that can arise in the catchment, in treatment and in distribution, in large, medium and small water supplies. Many experts worldwide contributed to this work over a period of several years, beginning with the 1st Meeting of Experts on Monitoring Chemicals in Drinking Water, held in Bangkok, Thailand, in January 2001. This was followed by the 2nd Meeting of Experts on Monitoring Chemicals in Drinking Water, also held in Bangkok, in December 2001. Both meetings were sponsored by WHO and hosted by the Department of Health, Ministry of Public Health, Thailand. The draft guidance document was subsequently tested in a series of field trials in 2002-2003 in Indonesia, Fiji, Nepal, Mongolia, the Philippines and Thailand. Lessons learnt through the field trials provided feedback that was valuable in revising and finalizing the document. Readers should note that while this publication has been developed as a supporting document for, and with reference to, the Guidelines for Drinking-water Quality, the guidelines themselves are frequently updated and the latest information should always be sought by reference to relevant World Health Organization publications and web site. (http://www.who.int/water_sanitation_health/dwq/guidelines/en/index.html).
