EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Chemically Bonded Phosphate Ceramics for Radioactive and Mixed Waste Solidification and Stabilization

Download or read book Chemically Bonded Phosphate Ceramics for Radioactive and Mixed Waste Solidification and Stabilization written by and published by . This book was released on 1993 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results of an initial investigation of low temperature setting chemically bonded magnesium ammonium phosphate (MAP) ceramics as waste form materials, for solidification and stabilization of radioactive and mixed waste, are reported. The suitability of MAP for solidifying and encapsulating waste materials was tested by encapsulating zeolites at loadings up to [approximately]50 wt%. The resulting composites exhibited very good compressive strength characteristics. Microstructure studies show that zeolite grains remain unreacted in the matrix. Potential uses for solidifying and stab wastes are discussed.

Book Chemically Bonded Phosphate Ceramics

Download or read book Chemically Bonded Phosphate Ceramics written by Arun S. Wagh and published by Elsevier. This book was released on 2016-05-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically Bonded Phosphate Ceramics brings together the latest developments in chemically bonded phosphate ceramics (CBPCs), including several novel ceramics, from US Federal Laboratories such as Argonne, Oak Ridge, and Brookhaven National Laboratories, as well as Russian and Ukrainian nuclear institutes. Coupled with further advances in their use as biomaterials, these materials have found uses in diverse fields in recent years. Applications range from advanced structural materials to corrosion and fire protection coatings, oil-well cements, stabilization and encapsulation of hazardous and radioactive waste, nuclear radiation shielding materials, and products designed for safe storage of nuclear materials. Such developments call for a single source to cover their science and applications. This book is a unique and comprehensive source to fulfil that need. In the second edition, the author covers the latest developments in nuclear waste containment and introduces new products and applications in areas such as biomedical implants, cements and coatings used in oil-well and other petrochemical applications, and flame-retardant anti-corrosion coatings. - Explores the key applications of CBPCs including nuclear waste storage, oil-well cements, anticorrosion coatings and biomedical implants - Demystifies the chemistry, processes and production methods of CBPCs - Draws on 40 years of developments and applications in the field, including the latest developments from USA, Europe, Ukraine, Russia, China and India

Book Rosella Paletti

Download or read book Rosella Paletti written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Stabilization and Solidification of Hazardous  Radioactive  and Mixed Wastes

Download or read book Stabilization and Solidification of Hazardous Radioactive and Mixed Wastes written by Roger D. Spence and published by CRC Press. This book was released on 2004-12-28 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of stabilization and solidification techniques in the field of waste treatment reflects the efforts to better protect human health and the environment with modern advances in materials and technology. Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes provides comprehensive information including case studie

Book Iron phosphate based Chemically Bonded Phosphate Ceramics for Mixed Waste Stabilization

Download or read book Iron phosphate based Chemically Bonded Phosphate Ceramics for Mixed Waste Stabilization written by and published by . This book was released on 1997 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an effort to develop chemically bonded phosphate ceramics for mixed waste stabilization, a collaborative project to develop iron-phosphate based ceramics has been initiated between Argonne National Laboratory and the V.G. Khlopin Radium Institute in St. Petersburg, Russia. The starter powders are oxides of iron that are generated as inexpensive byproduct materials in the iron and steel industry. They contain iron oxides as a mixture of magnetite (Fe3O4) and haematite (Fe2O3). In this initial phase of this project, both of these compounds were investigated independently. Each was reacted with phosphoric acid solution to form iron phosphate ceramics. In the case of magnetite, the reaction was rapid. Adding ash as the waste component containing hazardous contaminants resulted in a dense and hard ceramic rich in glassy phase. On the other hand, the reaction of phosphoric acid solution with a mixture of haematite and ash waste contaminated with cesium and americium was too slow. Samples had to be molded under pressure. They were cured for 2-3 weeks and then hardened by heating at 350°C for 3 h. The resulting ceramics in both cases were subjected to physical tests for measurement of density, open porosity, compression strength, phase analyses using X-ray diffraction and differential thermal analysis, and leaching tests using toxicity characteristic leaching procedure (TCLP) and ANS 16.1 with 7 days of leaching. Using the preliminary information obtained from these tests, we evaluated these materials for stabilization of Department of Energy's mixed waste streams.

Book Modified Phosphate Ceramics for Stabilization and Solidification of Salt Mixed Wastes

Download or read book Modified Phosphate Ceramics for Stabilization and Solidification of Salt Mixed Wastes written by and published by . This book was released on 1998 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel chemically bonded phosphate ceramics have been investigated for stabilization and solidification of chloride and nitrate salt wastes. Using low-temperature processing, we stabilized and solidified chloride and nitrate surrogate salts (with hazardous metals) in magnesium potassium phosphate ceramics up to waste loadings of 70-80 wt.%. A variety of characterizations, including strength, microstructure, and leaching, were then conducted on the waste forms. Leaching tests show that all heavy metals in the leachant are well below the EPAs universal treatment standard limits. Long-term leaching tests, per ANS 16. 1 procedure, yields leachability index for nitrate ions> 12. Chloride ions are expected to have an even higher (i.e., better) leachability index. Structural performance of these final waste forms, as indicated by compression strength and durability in aqueous environments, satisfies the regulatory criteria. Thus, based on the results of this study, it seems that phosphate ceramics are viable option for containment of salt wastes.

Book Ceramicrete Stabilization of Low level Mixed Wastes   a Complete Story

Download or read book Ceramicrete Stabilization of Low level Mixed Wastes a Complete Story written by and published by . This book was released on 1997 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last three years, Ceramicrete (chemically bonded phosphate ceramics) have been investigated at Argonne-East for low-temperature stabilization and solidification of U.S. Department of Energy (DOE's) mixed wastes, for which conventional high-temperature treatments cannot be used because of volatiles and pyrophorics present in these wastes. This paper summarizes the development of Ceramicrete and provides the current technology status. We discuss our early investigations with surrogates that are typical of DOE mixed wastes, subsequent testing with actual waste streams, and scale-up of the process to an operational level. Current efforts include testing the process at an operational level for an ash waste stream from the Idaho National Engineering Laboratory and obtaining sufficient information to prepare a technology performance report.

Book Development of Chemically Bonded Phosphate Ceramics for Stabilizing Low level Mixed Wastes

Download or read book Development of Chemically Bonded Phosphate Ceramics for Stabilizing Low level Mixed Wastes written by Seung-Young Jeong and published by . This book was released on 1997 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book A Unified System for Evaluation and Selection of Heat Stress Candidates

Download or read book A Unified System for Evaluation and Selection of Heat Stress Candidates written by Joseph Gold and published by . This book was released on 1961 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Phosphate Bonded Ceramics as Candidate Final waste form Materials

Download or read book Phosphate Bonded Ceramics as Candidate Final waste form Materials written by and published by . This book was released on 1994 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Room-temperature setting phosphate-bonded ceramics were studied as candidate materials for stabilization of DOE low-level problem mixed wastes which cannot be treated by other established stabilization techniques. Phosphates of Mg, Mg-Na, Al and Zr were studied to stabilize ash surrogate waste containing RCRA metals as nitrates and RCRA organics. We show that for a typical loading of 35 wt.% of the ash waste, the phosphate ceramics pass the TCLP test. The waste forms have high compression strength exceeding ASTM recommendations for final waste forms. Detailed X-ray diffraction studies and differential thermal analyses of the waste forms show evidence of chemical reaction of the waste with phosphoric acid and the host matrix. The SEM studies show evidence of physical bonding. The excellent performance in the leaching tests is attributed to a chemical solidification and physical as well as chemical bonding of ash wastes in these phosphate ceramics.

Book Engineered Ceramics

Download or read book Engineered Ceramics written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2016-02-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book project, all the American Ceramic Society's Engineering Ceramics Division Mueller and Bridge Building Award Winners, the ICACC Plenary Speakers and the past Engineering Ceramics Division Chairs have been invited to write book chapters on a topic that is compatible with their technical interests and consistent with the scope of the book, which is to focus on the current status and future prospects of various technical topics related to engineering ceramics, advanced ceramics and composite materials. Topics include: Mechanical Behavior and Performance of Ceramics & Composites Non-Destructive Evaluation and Mechanical Testing of Engineering Ceramics Brittle and Composite Material Design Modern Fracture Mechanics of Ceramics Thermal/Environmental Barrier Coatings Advanced Ceramic Coatings for Functional Applications Advanced Ceramic Joining Technologies Ceramics for Machining, Friction, Wear, and Other Tribological Applications Ceramic Composites for High-Temperature Aerospace Structures and Propulsion Systems Thermal Protection Materials: From Retrospect to Foresight Carbon/Carbon Composites Ceramic-Matrix Composites for Lightweight Construction Ultra High-Temperature Ceramics (UHTC) Nanolaminated Ternary Carbides and Nitrides (MAX Phases) Ceramics for Heat Engine and Other Energy Related Applications Solid Oxide Fuel Cells (SOFC) Armor Ceramics Next Generation Bioceramics Ceramics for Innovative Energy and Storage Systems Designing Ceramics for Electrochemical Energy Storage Devices Nanostructured Materials and Nanotechnology Advanced Ceramic Processing and Manufacturing Technologies Engineering Porous Ceramics Thermal Management Materials and Technologies Geopolymers Advanced Ceramic Sensor Technology Advanced Ceramics and Composites for Nuclear and Fusion Applications Advanced Ceramic Technologies for Rechargeable Batteries

Book Method of Waste Stabilization Via Chemically Bonded Phosphate Ceramics

Download or read book Method of Waste Stabilization Via Chemically Bonded Phosphate Ceramics written by and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A method for regulating the reaction temperature of a ceramic formulation process is provided comprising supplying a solution containing a monovalent alkali metal; mixing said solution with an oxide powder to create a binder; contacting said binder with bulk material to form a slurry; and allowing the slurry to cure. A highly crystalline waste form is also provided consisting of a binder containing potassium and waste substrate encapsulated by the binder.