Download or read book Ultrahigh Vacuum Metalorganic Chemical Vapor Deposition and in Situ Characterization of Nanoscale Titanium Dioxide Films written by Polly Wanda Chu and published by . This book was released on 1994 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin titanium dioxide films were produced by metalorganic chemical vapor deposition on sapphire(0001) in an ultrahigh vacuum (UHV) chamber. A method was developed for producing controlled submonolayer depositions from titanium isopropoxide precursor. Film thickness ranged from 0.1 to 2.7 nm. In situ X-ray photoelectron spectroscopy (XPS) was used to determine film stoichiometry with increasing thickness. The effect of isothermal annealing on desorption was evaluated. Photoelectron peak shapes and positions from the initial monolayers were analyzed for evidence of interface reaction. Deposition from titanium isopropoxide is divided into two regimes: depositions below and above the pyrolysis temperature. This temperature was determined to be 300 deg C. Controlled submonolayers of titanium oxide were produced by cycles of dosing with titanium isopropoxide vapor below and annealing above 300 deg C. Precursor adsorption below the pyrolysis temperature was observed to saturate after 15 minutes of dosing. The quantity absorbed was shown to have an upper limit of one monolayer. The stoichiometry of thin films grown by the cycling method were determined to be TiO2. Titanium dioxide film stoichiometry was unaffected by isothermal annealing at 700 deg C. Annealing produced a decrease in film thickness. This was explained as due to desorption. Desorption ceased at approximately 2.5 to 3 monolayers, suggesting bonding of the initial monolayers of film to sapphire is stronger than to itself. Evidence of sapphire reduction at the interface by the depositions was not observed. The XPS O is peak shifted with increased film thickness. The shifts were consistent with oxygen in sapphire and titanium dioxide having different O is photoelectron peak positions. Simulations showed the total shifts for thin films ranging in thickness of 0.1 to 2.7 nm to be -0.99 to -1.23 eV. Thick films were produced for comparison.
Download or read book Principles of Chemical Vapor Deposition written by Daniel Dobkin and published by Springer Science & Business Media. This book was released on 2003-04-30 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Chemical Vapor Deposition provides a simple introduction to heat and mass transfer, surface and gas phase chemistry, and plasma discharge characteristics. In addition, the book includes discussions of practical films and reactors to help in the development of better processes and equipment. This book will assist workers new to chemical vapor deposition (CVD) to understand CVD reactors and processes and to comprehend and exploit the literature in the field. The book reviews several disparate fields with which many researchers may have only a passing acquaintance, such as heat and mass transfer, discharge physics, and surface chemistry, focusing on key issues relevant to CVD. The book also examines examples of realistic industrial reactors and processes with simplified analysis to demonstrate how to apply the principles to practical situations. The book does not attempt to exhaustively survey the literature or to intimidate the reader with irrelevant mathematical apparatus. This book is as simple as possible while still retaining the essential physics and chemistry. The book is generously illustrated to assist the reader in forming the mental images which are the basis of understanding.
Download or read book Chemical Vapor Deposition and Characterization of Titanium Dioxide Thin Films written by David Christopher Gilmer and published by . This book was released on 1998 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Solution Deposition of Functional Oxide Thin Films written by Theodor Schneller and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.
Download or read book Chemical Vapor Deposition written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 1997 with total page 1686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CVD XV written by Mark Donald Allendorf and published by The Electrochemical Society. This book was released on 2000 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Photocatalysis written by Jiaguo Yu and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Vapour Deposition CVD written by Kwang-Leong Choy and published by CRC Press. This book was released on 2019-06-07 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely and complete overview on chemical vapour deposition (CVD) and its variants for the processing of nanoparticles, nanowires, nanotubes, nanocomposite coatings, thin and thick films, and composites. Chapters discuss key aspects, from processing, material structure and properties to practical use, cost considerations, versatility, and sustainability. The author presents a comprehensive overview of CVD and its potential in producing high performance, cost-effective nanomaterials and thin and thick films. Features Provides an up-to-date introduction to CVD technology for the fabrication of nanomaterials, nanostructured films, and composite coatings Discusses processing, structure, functionalization, properties, and use in clean energy, engineering, and biomedical grand challenges Covers thin and thick films and composites Compares CVD with other processing techniques in terms of structure/properties, cost, versatility, and sustainability Kwang-Leong Choy is the Director of the UCL Centre for Materials Discovery and Professor of Materials Discovery in the Institute for Materials Discovery at the University College London. She earned her D.Phil. from the University of Oxford, and is the recipient of numerous honors including the Hetherington Prize, Oxford Metallurgical Society Award, and Grunfeld Medal and Prize from the Institute of Materials (UK). She is an elected fellow of the Institute of Materials, Minerals and Mining, and the Royal Society of Chemistry.
Download or read book Nanoparticles and Nanostructured Films written by Janos H. Fendler and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this concise handbook leading experts give a broad overview of the latest developments in this emerging and fascinating field of nano-sized materials. Coverage includes new techniques for the synthesis of nanoparticles as well as an in-depth treatment of their characterization and chemical and physical properties. The future applications of these advanced materials are also discussed. The wealth of information included makes this an invaluable guide for graduate students as well as scientists in materials science, chemistry or physics - looking for a comprehensive treatment of the topic.
Download or read book Chromium Doped TiO2 Sputtered Thin Films written by Anouar Hajjaji and published by Springer. This book was released on 2014-12-24 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents co-sputtered processes ways to produce chrome doped TiO2 thin films onto various substrates such as quartz, silicon and porous silicon. Emphasis is given on the link between the experimental preparation and physical characterization in terms of Cr content. Moreover, the structural, optical and optoelectronic investigations are emphasized throughout. The book explores the potencial applications of devices based on Cr doped TiO2 thin films as gas sensors and in photocatalysis and in the photovoltaic industry. Also, this book provides extensive leads into research literature, and each chapter contains details which aim to develop awareness of the subject and the methods used. The content presented here will be useful for graduate students as well as researchers in materials science, physics, chemistry and engineering.
Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter
Download or read book EUROCVD 15 written by Anjana Devi and published by The Electrochemical Society. This book was released on 2005 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Handbook of Thin Film Deposition written by Krishna Seshan and published by William Andrew. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Thin Film Deposition is a comprehensive reference focusing on thin film technologies and applications used in the semiconductor industry and the closely related areas of thin film deposition, thin film micro properties, photovoltaic solar energy applications, new materials for memory applications and methods for thin film optical processes. In a major restructuring, this edition of the handbook lays the foundations with an up-to-date treatment of lithography, contamination and yield management, and reliability of thin films. The established physical and chemical deposition processes and technologies are then covered, the last section of the book being devoted to more recent technological developments such as microelectromechanical systems, photovoltaic applications, digital cameras, CCD arrays, and optical thin films. - A practical survey of thin film technologies aimed at engineers and managers involved in all stages of the process: design, fabrication, quality assurance and applications - Covers core processes and applications in the semiconductor industry and new developments in the photovoltaic and optical thin film industries - The new edition takes covers the transition taking place in the semiconductor world from Al/SiO2 to copper interconnects with low-k dielectrics - Written by acknowledged industry experts from key companies in the semiconductor industry including Intel and IBM - Foreword by Gordon E. Moore, co-founder of Intel and formulator of the renowned 'Moore's Law' relating to the technology development cycle in the semiconductor industry
Download or read book Resistive Switching in TiO2 Thin Films written by Lin Yang and published by Forschungszentrum Jülich. This book was released on 2011 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Processing of Nanomaterials written by R. Mohan Sankaran and published by CRC Press. This book was released on 2017-12-19 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are at a critical evolutionary juncture in the research and development of low-temperature plasmas, which have become essential to synthesizing and processing vital nanoscale materials. More and more industries are increasingly dependent on plasma technology to develop integrated small-scale devices, but physical limits to growth, and other challenges, threaten progress. Plasma Processing of Nanomaterials is an in-depth guide to the art and science of plasma-based chemical processes used to synthesize, process, and modify various classes of nanoscale materials such as nanoparticles, carbon nanotubes, and semiconductor nanowires. Plasma technology enables a wide range of academic and industrial applications in fields including electronics, textiles, automotives, aerospace, and biomedical. A prime example is the semiconductor industry, in which engineers revolutionized microelectronics by using plasmas to deposit and etch thin films and fabricate integrated circuits. An overview of progress and future potential in plasma processing, this reference illustrates key experimental and theoretical aspects by presenting practical examples of: Nanoscale etching/deposition of thin films Catalytic growth of carbon nanotubes and semiconductor nanowires Silicon nanoparticle synthesis Functionalization of carbon nanotubes Self-organized nanostructures Significant advances are expected in nanoelectronics, photovoltaics, and other emerging fields as plasma technology is further optimized to improve the implementation of nanomaterials with well-defined size, shape, and composition. Moving away from the usual focus on wet techniques embraced in chemistry and physics, the author sheds light on pivotal breakthroughs being made by the smaller plasma community. Written for a diverse audience working in fields ranging from nanoelectronics and energy sensors to catalysis and nanomedicine, this resource will help readers improve development and application of nanomaterials in their own work. About the Author: R. Mohan Sankaran received the American Vacuum Society’s 2011 Peter Mark Memorial Award for his outstanding contributions to tandem plasma synthesis.
Download or read book Handbook of Thin Film Deposition written by Dominic Schepis and published by Elsevier. This book was released on 2024-10-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thin Film Deposition, Fifth Edition, is a comprehensive reference focusing on thin film technologies and applications used in the semiconductor industry. When pursuing patents, there is a phase called 'reduction to practice' where the idea for a technology transitions from a concept to actual use. The section 'Thin Film Reduction to Practice' includes chapters that review the most relevant methods to fabricate thin films towards practical applications. Then, the latest applications of thin film deposition technologies are discussed. Handbook of Thin Film Deposition, 5th Edition is suitable for materials scientists and engineers in academia and working in semiconductor R&D. - Offers a practical survey of thin film technologies including design, fabrication, and reliability - Covers core processes and applications in the semiconductor industry and discusses latest advances in new thin film development - Features new chapters that review methods on front-end and back-end thin films
