Download or read book Toxicants in Food Packaging and Household Plastics written by Suzanne M. Snedeker and published by Springer. This book was released on 2014-08-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on toxicants that can be released from food packaging materials and household plastics. Chapters include sources and levels of chemical exposure, known and suspected health effects and the identification of data gaps with recommendations for further research. In addition, regulatory approaches and risk assessment challenges in the United States and Europe are discussed. Chapters cover both the more widely known chemicals that can migrate from food packaging (bisphenol A, perfluorinated chemicals), and household plastics (lead, phthalates, brominated flame retardants), as well as chemicals that are just entering use in food packaging (nanomaterials in polymer food packaging) and chemicals recently identified as migrating from food packaging to food stuffs (phthalates, benzophenones, antimony, methylnaphthalene and the alkylphenols nonylphenol and octylphenol). Chapters on phthalates and brominated flame retardants discuss challenges that arise with the use of replacement chemicals. The health effect sections of chapters have drawn on a wide variety of toxicological endpoints and recommend approaches to better assess toxicological risks in vulnerable human populations. Reflecting the global nature of our food supply and household consumer goods, contributions have been drawn from international experts. A wide range of scientists will find this book to be useful, including toxicologists, environmental health scientists, food scientists, and regulators.

Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2009-09-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. - Structured to make it easy for the reader to find solutions for specific property requirements - Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result - Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function

Download or read book Advanced High Strength Natural Fibre Composites in Construction written by Mizi Fan and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. - Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials - Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers - Covers both traditional and novel manufacturing technologies for high strength natural fiber composites - Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies - Presents contributions from leading international experts in the field

Download or read book Pressure Sensitive Adhesives and Applications written by Istvan Benedek and published by CRC Press. This book was released on 2004-02-03 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure-Sensitive Adhesives and Applications, Second Edition explains how pressure-sensitive adhesives (PSAs) work, why they are used, and the technology used to manufacture them. This second edition features the latest developments in the field. Dr. Benedek discusses the factors that affect the rheology and special flow characteristics responsible for the adhesivity of liquid and solid PSAs. His book explores the viscoelastic behavior of PSAs, and compares them to plastics, rubbers, and polymers properties and examines the parameters that influence the conversion process of PSAs from the coating of carrier materials to the properties of the final laminate. The author covers adhesion/cohesion balance, time-temperature dependence of pressure sensitivity, chemical composition, coating properties, and coating processes affect the adhesive properties of PSA and their end products and how application-specific performance indices are used to determine the formulation and manufacture of raw materials. In addition, up-to-date coating machines, converting technology, and environmental considerations in the manufacture of PSA final products as well as industry-specific methods of testing for quality assurance and control are discussed. Pressure-Sensitive Adhesives and Applications, Second Edition combines the theoretical basis of pressure sensitivity with the practical aspects of manufacturing, testing, and use of PSAs. Readers are offered an exhaustive as well as comparative look at the engineering of plastics, adhesives, and pressure-sensitives, resulting in an indispensable, up-to-date reference for adhesive and polymer chemists and technologists.

Download or read book Silane Coupling Agents written by Edwin P. Plueddemann and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: * It has been rumored that a bumble bee has such aerodynamic deficiencies that it should be incapable of flight. Fiberglass-reinforced polymer com posites, similarly, have two (apparently) insurmountable obstacles to per formance: 1) Water can hydrolyze any conceivable bond between organic and inorganic phase, and 2) Stresses across the interface during temperature cycling (resulting from a mismatch in thermal expansion coefficients) may exceed the strength of one of the phases. Organofunctional silanes are hybrid organic-inorganic compounds that are used as coupling agents across the organic-inorganic interface to help overcome these two obstacles to composite performance. One of their functions is to use the hydrolytic action of water under equilibrium condi tions to relieve thermally induced stresses across the interface. If equilib rium conditions can be maintained, the two problems act to cancel each other out. Coupling agents are defined primarily as materials that improve the practical adhesive bond of polymer to mineral. This may involve an increase in true adhesion, but it may also involve improved wetting, rheology, and other handling properties. The coupling agent may also modify the inter phase region to strengthen the organic and inorganic boundary layers.

Download or read book Defoaming written by P.R. Garrett and published by CRC Press. This book was released on 2017-12-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews all known antifoam mechanisms, and discusses the appropriate practical approaches for solving foam control problems in a variety of industrial contexts. These range from crude oil production to detergent formulation.

Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. - Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres - Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing - Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment

Download or read book Island of Coal written by Great Britain. National Coal Board and published by . This book was released on 1974 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biological Performance of Materials written by Jonathan Black and published by CRC Press. This book was released on 2005-12-20 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioengineers need a thorough grounding in biocompatibility - the biological performance of materials. Until now, there were no publications suitable for a neophyte in the field; prior publications were either not comprehensive or focused on rather narrow interests. Drawing on the author's 35 years of experience as a teacher, researcher, and consultant in biomaterials science and engineering (BSE), Biological Performance of Materials: Fundamentals of Biocompatibility, Fourth Edition focuses primarily on principles of biological performance at a relatively fundamental level, analyzing interactions between living organisms and nonliving materials used in medical devices - the subject that sets BSE apart as a distinct field of investigation. Following an introductory section, the book is divided into three sections: the material response to biological systems, host response to biomaterials, and test methods for determining biological response in vitro as well as in animal models and clinical settings. Supplemental "Interparts" summarize the physical properties of commonly used metallic, polymeric, and ceramic biomaterials. They also provide a guide to understanding the clinical performance of implanted biomaterials.

Download or read book Plastic Films in Food Packaging written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The value of the groceries purchases in the USA is over $500 billion annually, most of which is accounted for by packaged foods. Plastic packaging of foods is not only ubiquitous in developed economies, but increasingly commonplace in the developing world, where plastic packaging is instrumental in decreasing the proportion of the food supply lost to spoilage. This new handbook is a combination of new material and updated chapters, chosen by Dr. Sina Ebnesajjad, from recently published books on this subject. Plastic Films in Food Packaging offers a practical handbook for engineers, scientists and managers working in the food packaging industry, providing a tailor-made package of science and engineering fundamentals, best practice techniques and guidance on new and emerging technologies. By covering materials, design, packaging processes, machinery and waste management together in one book, the authors enable the reader to take a lifecycle approach to food packaging. The Handbook addresses questions related to film grades, types of packages for different types of foods, packaging technologies, machinery and waste management. Additionally the book provides a review of new and emerging technologies. Two chapters cover the development of barrier films for food packaging and the regulatory and safety aspects of food packaging. - Essential information and practical guidance for engineers and scientists working at all stages of the food packaging lifecycle: from design through manufacture to recycling - Includes key published material on plastic films in food packaging, updated specifically for this Handbook, and new material on the regulatory framework and safety aspects - Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design and manufacturing decisions

Download or read book Biopolymers Reuse Recycling and Disposal written by Michael Niaounakis and published by William Andrew. This book was released on 2013-06-20 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers Reuse, Recycling and Disposal is the first book covering all aspects of biopolymer waste management and post-usage scenarios, embracing existing technologies, applications, and the behavior of biopolymers in various waste streams. The book investigates the benefits and weaknesses, social, economic and environmental impacts, and regulatory aspects of each technology. It covers different types of recycling and degradation, as well as life cycle analysis, all supported by case studies, literature references, and detailed information about global patents. Patents in particular—comprising 80% of published technical literature in this emerging field, widely scattered, and often available in Japanese only—are a key source of information. Dr. Niaounakis draws on disciplines such as polymer science, management, biology and microbiology, organic chemistry, environmental chemistry, and patent law to produce a reference guide for engineers, scientists and other professionals involved in the development and production of biopolymers, waste management, and recycling. This information is also valuable for regulators, patent attorneys and academics working in this field. - Explores techniques and technologies involved in managing biopolymers in the waste stream, including recycling and upcycling - Provides waste management and recycling professionals the knowledge they need to plan for the exponential growth in biopolymer waste - Helps engineers and product designers fully consider the end-of-life aspects of their environmentally sustainable 'green' products and solutions

Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.

Download or read book The Effect of Long Term Thermal Exposure on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2013-11-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference guide brings together a wide range of essential data on the effect of long term thermal exposure on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The data is supported by explanations of how to make use of the data in real-world engineering contexts. High heat environments are common in automotive, oil and gas, household appliances, coatings, space and aeronautics and many more end uses. As a result, thermal stability data are critically important to engineers designing parts particularly that replace metals, work that is common today as they look for ways to reduce weight. The data tables in this book enable engineers and scientists to select the right materials for a given product or application across a wide range of sectors. Several polymer classes are covered, including polyolefins, polyamides, polyesters, elastomers, fluoropolymers, biodegradable plastics and more, saving readers the need to contact suppliers. The book also includes introductory sections to provide background on plastic/polymer chemistry and formulation and plastic testing methods, providing the knowledge required to make best use of the data. Essential data and practical guidance for engineers and scientists working with plastics for use in high temperature environments Includes introductory chapters on polymer chemistry and its effect on thermal stability, providing the underpinning knowledge required to utilize the data Covers a wide range of commercial polymer classes, saving readers the need to contact suppliers

Download or read book Thermoforming of Single and Multilayer Laminates written by Syed Ali Ashter and published by William Andrew. This book was released on 2013-11-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoforming of Single and Multilayer Laminates explains the fundamentals of lamination and plastics thermoforming technologies along with current and new developments. It focuses on properties and thermoforming mechanics of plastic films and in particular single and multilayered laminates, including barrier films. For environmental and economic reasons, laminates are becoming increasingly important as a replacement for solid sheets and paint finishes in many industries, including transportation, packaging, and construction. Yet the processes of film formability during the extensive deformation and elevated temperatures experienced in conventional processing technologies, such as thermoforming, are poorly understood by most engineers. This book covers production processes, such as extrusion, calendaring, and casting, as well as mechanical and impact testing methods. It also describes how testing protocols developed for metals can be leveraged for plastic films and laminates, and includes a thorough discussion on methods for performing optical strain analysis. Applications in transportation vehicles and packaging, including packaging for food, medical and electronics applications, sports equipment, and household appliances, are discussed. Safety, recycling and environmental aspects of thermoforming and its products complete the book. First comprehensive source of information and hands-on guide for the thermoforming of multilayered laminates Covers applications across such sectors as automotive, packaging, home goods, and construction Introduces new testing methods leveraging protocols used for metals

Download or read book Thermosets and Composites written by Michel Biron and published by Elsevier. This book was released on 2013-11-04 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the technology and business aspects of thermosets, providing a practical guide designed for engineers working in real-world industrial settings. The author explores the criteria for material selection, provides information on material properties for each family of thermosets, and discusses the various processing options for each material type. He explains advantages and disadvantages of using thermosets and composites in comparison to competing materials and assesses cost aspects, enabling the reader to balance out technical and economic constraints when choosing a thermoset and processing technology for a given application.This second edition contains a new section on composites solutions for practical problems, gathering information on trends contributing to the breakthrough of composites in various sectors. Other new sections on specific crosslinking processes, processing trends, machinery and equipment manufacturers, applications, bio-sourced thermosets and natural fibers, and recycling of thermosets and composites are included. Case studies are provided, illustrating many design and production challenges. Furthermore, new market data and information about health and safety will be added. All data is fully updated throughout, with pricing in USD and EUR, and both ASTM (North American) and European standards.Thermosets and Thermoset Composites, Second Edition is the only book that gives in-depth coverage of a wide range of subject matters and markets, yet in brevity and concision in a single volume, avoiding the need of consulting a series of other specialized books. By providing the knowledge necessary for selecting a fabrication process, thermoset material and methods for determining the all important cost of thermoset parts this new edition is an invaluable decision-making aid and reference work for practitioners in a field with growing importance. - Combining materials data, information on processing techniques, and economic aspects, Biron provides a unique end-to-end approach to the selection and use of materials in the plastics industry and related sectors - New material on bio-sourced thermosets, natural fibers, and recycling of thermosets - Concise and easy-to-use source of information and decision-making aid

Download or read book Thermoplastics and Thermoplastic Composites written by Michel Biron and published by William Andrew. This book was released on 2012-11-12 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the technology and business aspects of thermoplastics, providing a guide designed for engineers working in real-world industrial settings. The author explores the criteria for material selection, provides a detailed guide to each family of thermoplastics, and also explains the various processing options for each material type. More than 30 families of thermoplastics are described with information on their advantages and drawbacks, special grades, prices, transformation processes, applications, thermal behaviour, technological properties (tenacity, friction, dimensional stability), durability (ageing, creep, fatigue), chemical and fire behaviour, electrical properties, and joining possibilities. Biron explores the technological properties and economics of the major thermoplastics and reinforced thermoplastics, such as polyethylene, and emerging polymers such as polybenzimidazole, Thermoplastic Elastomers (TPEs) and bioplastics. In the second edition, a new section 'plastics solutions for practical problems' provides over 25 case studies illustrating a wide range of design and production challenges across the spectrum of thermoplastics, from metal and glass replacement solutions, to fire retardant plastics and antimicrobials. In addition, Biron provides major new material on bioplastics and wood plastic composites (WPCs), and fully updated data throughout. Combining materials data, information on processing techniques, and economic aspects (pricing), Biron provides a unique end-to-end approach to the selection and use of materials in the plastics industry and related sectors Includes a new section of case studies, illustrating best practice across a wide range of applications and industry sectors New material on bioplastics and sustainable composites

Download or read book Handbook of Molded Part Shrinkage and Warpage written by Jerry Fischer and published by William Andrew. This book was released on 2012-12-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by