Download or read book Chemical Recycling of Mixed Waste Plastics by Selective Pyrolysis written by and published by . This book was released on 1995 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this work is to use selective pyrolysis to produce high-value chemicals from waste plastics mixtures. Selectivity is achieved by exploiting differences in reaction rates, catalysis, and coreactants. Target wastes are molecular mixtures such as; blends or composites, or mixtures from manufactured products such as; carpets and post-consumer mixed-plastic wastes. The experimental approach has been to use small-scale experiments using molecular beam mass spectrometry (MBMS), which provides rapid analysis of reaction products and permits rapid screening of process parameters. Rapid screening experiments permit exploration of many potential waste stream applications for the selective pyrolysis process. After initial screening, small-scale, fixed-bed and fluidized-bed reactors are used to provide products for conventional chemical analysis, to determine material balances, and to test the concept under conditions that will be used at a larger scale. Computer assisted data interpretation and intelligent chemical processing are used to extract process-relevant information from these experiments. An important element of this project employs technoeconomic assessments and market analyses of durables, the availability of other wastes, and end-product uses to identify target applications that have the potential for economic success.
Download or read book Feedstock Recycling and Pyrolysis of Waste Plastics written by John Scheirs and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill. This book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic/waste oil, waste plastics/coal, and waste plastics/rubber.
Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.
Download or read book Towards Circular Economy Closing the Loop with Chemical Recycling of Solid Plastic Waste written by and published by Academic Press. This book was released on 2022-11-23 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Engineering serial, Volume 60 highlights new advances in the field with this new volume presenting interesting chapters. Each chapter is written by an international board of authors. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Advances in Chemical Engineering series - Includes the latest information on the Circular Economy: Closing the Loop with Chemical Recycling of Solid Plastic Waste
Download or read book Circular Plastics Technologies written by Katrina Knauer and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-01-29 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Waste written by Arnold Tucker and published by Smart Publications. This book was released on 2002-01-01 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the issue of converting plastics waste into energy and/or useful chemicals. Much plastic material is discarded as waste, such as packaging and end-of-life vehicle components. This report introduces the different waste management options. It discusses the methods available for treating mixed plastics waste and PVC-rich plastics waste. The emphasis in this report is on technologies which are already being used or assessed for use on a commercial scale. Comparisons are made between the different types of recycling currently available in terms of life cycle assessment and environmental impact. Feedstock recycling is discussed extensively in this review. This report is accompanied by around 400 abstracts from papers in the Rapra Polymer Library database.
Download or read book Life Cycle Impact Assessment written by Michael Z. Hauschild and published by Springer. This book was released on 2015-03-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a detailed presentation of the principles and practice of life cycle impact assessment. As a volume of the LCA compendium, the book is structured according to the LCIA framework developed by the International Organisation for Standardisation (ISO)passing through the phases of definition or selection of impact categories, category indicators and characterisation models (Classification): calculation of category indicator results (Characterisation); calculating the magnitude of category indicator results relative to reference information (Normalisation); and converting indicator results of different impact categories by using numerical factors based on value-choices (Weighting). Chapter one offers a historical overview of the development of life cycle impact assessment and presents the boundary conditions and the general principles and constraints of characterisation modelling in LCA. The second chapter outlines the considerations underlying the selection of impact categories and the classification or assignment of inventory flows into these categories. Chapters three through thirteen exploreall the impact categories that are commonly included in LCIA, discussing the characteristics of each followed by a review of midpoint and endpoint characterisation methods, metrics, uncertainties and new developments, and a discussion of research needs. Chapter-length treatment is accorded to Climate Change; Stratospheric Ozone Depletion; Human Toxicity; Particulate Matter Formation; Photochemical Ozone Formation; Ecotoxicity; Acidification; Eutrophication; Land Use; Water Use; and Abiotic Resource Use. The final two chapters map out the optional LCIA steps of Normalisation and Weighting.
Download or read book Polymer Recycling written by John Scheirs and published by John Wiley & Sons. This book was released on 1998-09-16 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of state-of-the-art recycling techniques together with current and potential applications. Presents material that is normally only available in the form of conference proceedings Includes flow charts detailing the recycling process Helps identify the problems encountered in the recycling of polymers Presents pie graphs and photographs of commercial outlets A comprehensive volume which will prove to be invaluable for polymer manufacturers, recyclers and marketers as well as environmental authorities and materials engineers.
Download or read book Modern Polyesters written by John Scheirs and published by John Wiley & Sons. This book was released on 2005-09-01 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of the family of polyester polymers which comprise an important group of plastics that span the range of commodity polymers to engineering resins. It describes the preparation, properties and applications of polyesters. Readers will also find details on polyester-based elastomers, biodegradable aliphatic polyester, liquid crystal polyesters and unsaturated polyesters for glass-reinforced composites. Presents an overview of the most recent developments. Explores synthesis, catalysts, processes, properties and applications. Looks at emerging polyester materials as well as existing ones. Written by foremost experts from both academia and industry, ensuring that both fundamentals and practical applications are covered.
Download or read book Mixed Or Contaminated Waste Plastic Recycling Through Microwave Assisted Pyrolysis written by Marco Frediani and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single type of thermoplastic polymer is easily recycled through a mechanical process, but this way can,Äôt be followed in the presence of mixed or contaminated plastic. In this case, one of the main followed solutions is a thermochemical process and among them, microwave-assisted pyrolysis is one of the emerging technologies. This chapter offers an update of the microwave-assisted pyrolysis of mixed or contaminated waste plastic as a very promising example of chemical recycling. Furthermore, some unpublished results in this field will be reported such as the pyrolysis of waste lead containing polyethylene coming from end cycle batteries or the pyrolysis of waste polypropylene from facemasks used for covid protection. Finally, some examples of pilot plants will be described and commented as well as several industrial cooperations.
Download or read book Handbook of Plastics Recycling written by Francesco Paolo La Mantia and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses some of the state-of-the-art techniques of recycling post-consumer plastic materials and focuses on mechanical recycling, chemical recycling and energy recovery. The book is intended for all those who are interested in recycling of post consumer plastic waste. Although, this book discusses technical aspects of recycling, the authors have endeavoured to make this book easily understandable to anyone interested in the subject enabling the reader to gain a thorough grounding in all the subjects discussed.
Download or read book Recent Developments in Plastic Recycling written by Jyotishkumar Parameswaranpillai and published by Springer Nature. This book was released on 2021-10-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive account of the recent developments in the recycling of plastic waste material. It presents state-of-the-art procedures for recycling of plastics from different sources and various characterization methods adopted in analyzing their properties. In addition, it looks into properties, processing, and applications of recycled plastic products as one of the drivers for sustainable recycling plastics especially in developing countries. This book proves a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry, and engineering courses.
Download or read book Polypropylene written by Clive Maier and published by William Andrew. This book was released on 1998-04-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene: The Definitive User's Guide and Databook presents in a single volume a panoramic and up-to-the-minute user's guide for today's most important thermoplastic. The book examines every aspectùscience, technology, engineering, properties, design, processing, applicationsùof the continuing development and use of polypropylene. The unique treatment means that specialists can not only find what they want but for the first time can relate to and understand the needs and requirements of others in the product development chain. The entire work is underpinned by very extensive collections of property data that allow the reader to put the information to real industrial and commercial use. Despite the preeminence and unrivaled versatility of polypropylene as a thermoplastic material to manufacture, relatively few books have been devoted to its study. Polypropylene: The Definitive User's Guide and Databook not only fills the gap but breaks new ground in doing so.Polypropylene is the most popular thermoplastic in use today, and still one of the fastest growing. Polypropylene: The Definitive User's Guide and Databook is the complete workbook and reference resource for all those who work with the material. Its comprehensive scope uniquely caters to polymer scientists, plastics engineers, processing technologists, product designers, machinery and mold makers, product managers, end users, researchers and students alike.
Download or read book Plastics to Energy written by Sultan Al-Salem and published by William Andrew. This book was released on 2018-11-05 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics to Energy: Fuel, Chemicals, and Sustainability Implications covers important trends in the science and technology of polymer recovery, such as the thermo-chemical treatment of plastics, the impact of environmental degradation on mechanical recycling, incineration and thermal unit design, and new options in biodegradable plastics. The book also introduces product development opportunities from waste materials and discusses the main processes and pathways of the conversion of polymeric materials to energy, fuel and chemicals. A particular focus is placed on industrial case studies and academic reviews, providing a practical emphasis that enables plastics practitioners involved in end-of-life aspects to employ these processes. Final sections examine lifecycle and cost analysis of different plastic waste management processes, exploring the potential of various techniques in modelling, optimization and simulation of waste management options. - Introduces new pathways for the end-of-life treatment of plastics and polymers, including conversion to energy, fuel and other chemicals - Compares different options to assist materials scientists, engineers and waste management practitioners to choose the most effective and sustainable option - Covers the latest trends in the science and technology of polymer energy recovery
Download or read book Marine Anthropogenic Litter written by Melanie Bergmann and published by Springer. This book was released on 2015-06-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how man-made litter, primarily plastic, has spread into the remotest parts of the oceans and covers all aspects of this pollution problem from the impacts on wildlife and human health to socio-economic and political issues. Marine litter is a prime threat to marine wildlife, habitats and food webs worldwide. The book illustrates how advanced technologies from deep-sea research, microbiology and mathematic modelling as well as classic beach litter counts by volunteers contributed to the broad awareness of marine litter as a problem of global significance. The authors summarise more than five decades of marine litter research, which receives growing attention after the recent discovery of great oceanic garbage patches and the ubiquity of microscopic plastic particles in marine organisms and habitats. In 16 chapters, authors from all over the world have created a universal view on the diverse field of marine litter pollution, the biological impacts, dedicated research activities, and the various national and international legislative efforts to combat this environmental problem. They recommend future research directions necessary for a comprehensive understanding of this environmental issue and the development of efficient management strategies. This book addresses scientists, and it provides a solid knowledge base for policy makers, NGOs, and the broader public.
Download or read book Mixed Plastics Recycling Technology written by Bruce Hegberg and published by William Andrew. This book was released on 1992-12-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.
Download or read book Polymer Waste Management written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2018-08-28 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is literally awash with plastics and this book practically provides a broad overview of plastic recycling procedures and waste management. With the huge amount of plastics floating in the oceans, fish and other sea creatures are directly suffering the consequences. On land, city leaders and planners are banning one-use plastics as well as plastic bags from grocery stores in an effort to stem the use. Many countries have made official announcements and warnings concerning the pollution caused from plastic wastes. These urgent developments have stimulated the author to study the problem and write Polymer Waste Management. Plastic recycling refers to a method that retrieves the original plastic material. However, there are many sophisticated methods available for the treatment and management of waste plastics such as basic primary recycling, where the materials are sorted and collected individually. In chemical recycling, the monomers and related compounds are processed by special chemical treatments. Other methods, such as pyrolysis, can produce fuels from waste plastics. These methods and others are treated comprehensively in the book. This groundbreaking book also discusses: General aspects, such as amount of plastics production, types of waste plastics, analysis procedures for identification of waste plastic types, standards for waste treatment, contaminants in recycled plastics. Environmental aspects, such as pollution in the marine environment and landfills. The advantages of the use of bio-based plastics. Recycling methods for individual plastic types and special catalysts.