Download or read book Proceedings written by American Wood-Preservers' Association and published by . This book was released on 1980 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: List of members in each vol. (except v. 2).
Download or read book Wood Modification Technologies written by Dick Sandberg and published by CRC Press. This book was released on 2021-07-15 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market for durable products using modified wood has increased substantially during the last few years. This is partly because of the restriction on the use of toxic preservatives due to environmental concerns, and to lower maintenance cost and time. Furthermore, as sustainability becomes a greater concern, the environmental impact of construction and interior materials is factored in planning by considering the whole life cycle and embodied energy of the materials used. Wood is modified to improve its intrinsic properties, enhance the range of applications of timber, and to acquire the form and functionality desired by engineers without calling the environmental friendliness into question. Wood modification processes are at various stages of development, and the challenges faced in scaling up to industrial applications differ. The aim of this book is to put together the key elements of the changes of wood constituents and the related changes in wood properties of modified wood. Further, a selection of the principal technologies implemented in wood modification are presented. This work is intended for researchers, professionals of timber construction, as well as students studying the science of materials, civil engineering and architecture. This work is not exhaustive, but intends to deliver an outline of the scientific disciplines necessary to apprehend the technologies of wood modification and its behavior during treatment, as well as during its use.
Download or read book Report of Proceedings written by American Wood-Preservers' Association. Meeting and published by . This book was released on 1980 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: List of members in each vol. (except v. 2).
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Wood Modification written by Callum A. S. Hill and published by John Wiley & Sons. This book was released on 2007-02-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
Download or read book The Chemistry Of Solid Wood written by Rowell and published by . This book was released on 1986-01-01 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 15-chapter book is divided into four sections that discuss wood's structure and basic chemistry, its properties and reactivity, and its surface and degradation chemistry. The very basis of how wood is formed and the structure it assumes during this growth are given in the first section. Various wood science terms are defined and discussed thoroughly to give a clear and adequate foundation for the rest of the book. Wood water relationship important in almost any wood applications- are also discussed in this section. The subsequent three sections discuss relations and chemistry important for the beginning wood chemist to understand. These topics include wood's cell wall components, strength, interaction with preservatives, and adhesion. Wood polymer materials, wood surface activation, weathering and protection, and pyrolysis and fire retardancy are topics also embraced.
Download or read book Surface Application of Paper Chemicals written by J. Brander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exception of a slight hiccup during the height of the recent environmental movement (during the early 1990s), when for a year or two consumers were prepared to pay a price premium for lower quality recycled paper than for the virgin product, the inexorable improvement in the quality demanded of paper products continues. This demand for quality covers not only the aesthetics ofthe product but also its performance. Moreover, it is becoming increasingly the case that papers designed for a particular use must, as it were incidentally, also perform well in alternative applications. An example is that of office and printing papers, which are expected to perform as well in copier machines as in all the various forms of impact and non-impact printers. But even greater demands are made in other product areas, where board designed for dry foods can also be expected to protect moist and fatty materials and be made of 100% recycled fibre. The need to isolate foodstuffs from some of the contaminants that can affect recycled board is a· serious challenge. Thus, papermakers are constantly striving to meet a broadening spectrum of demands on their products; often while accepting declining quality of raw materials. The product design philosophy that has arisen in response to this is increasingly to isolate the bulk of a paper from its uses: to engineer the needed performance characteristics into the paper surfaces while more or less ignoring what happens inside.
Download or read book Timber Trades Journal Wood Processing written by and published by . This book was released on 1987 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Railroad Research Bulletin written by and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book XVI IUFRO World Congress written by International Union of Forestry Research Organizations and published by . This book was released on 1976 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Journal of Industrial and Engineering Chemistry written by and published by . This book was released on 1923 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Modification in Europe written by Dennis Jones and published by Firenze University Press. This book was released on 2019-01-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a result of a questionnaire and subsequent collation of data, which outlines the current status of wood modification across Europe in terms of national inventories and groups that have reported current activity in the respective research areas covered in this report.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2012-09-06 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood has played a major role throughout human history. Strong and versatile, the earliest humans used wood to make shelters, cook food, construct tools, build boats, and make weapons. Recently, scientists, politicians, and economists have renewed their interest in wood because of its unique properties, aesthetics, availability, abundance, and perha
Download or read book Wood Modification Technologies written by Dick Sandberg and published by CRC Press. This book was released on 2021-07-14 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to Improvement of wood products Describes Sustainable development Covers Environmental industrial processing
Download or read book Riegel s Handbook of Industrial Chemistry written by James A. Kent and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present in a single volume an up-to-date account of the chemistry and chemical engineering which underlie the major areas of the chemical process industry. This most recent edition includes several new chapters which comprise important threads in the industry's total fabric. These new chapters cover waste minimization, safety considerations in chemical plant design and operation, emergency response planning, and statistical applications in quality control and experimental planning. Together with the chapters on chemical industry economics and wastewater treatment~ they provide a unifying base on which the reader can most effectively apply the information provided in the chapters which describe the various areas of the chemical process industries. The ninth edition of this established reference work contains the contributions of some fifty experts from industry, government, and academe. I have been humbled by the breadth and depth of their knowledge and expertise and by the willingness and enthusiasm with which they shared their knowledge and insights. They have, without exception, been unstinting in their efforts to make their respective chapters as complete and informative as possible within the space available. Errors of omission, duplication, and shortcomings in organization are mine. Grateful acknowledgment is made to the editors of technical journals and publishing houses for permission to reproduce illustrations and other materials and to the many industrial concerns which contributed drawings and photographs. Comments and criticisms by readers will be welcome.
Download or read book Performance of Bio based Building Materials written by Dennis Jones and published by Woodhead Publishing. This book was released on 2017-07-07 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance of Bio-based Building Materials provides guidance on the use of bio-based building materials (BBBM) with respect to their performance. The book focuses on BBBM currently present on the European market. The state-of-the-art is presented regarding material properties, recommended uses, performance expectancies, testing methodology, and related standards. Chapters cover both 'old and traditional' BBBM since quite a few of them are experiencing a comeback on the market. Promising developments that could become commercial in the near future are presented as well. The book will be a valuable reference resource for those working in the bio-based materials research community, architects and agencies dealing with sustainable construction, and graduate students in civil engineering. - Takes a unique approach to bio-based materials and presents a broad overview of the topics on relevant areas necessary for application and promotion in construction - Contains a general description, notable properties related to performance, and applications - Presents standards that are structured according to performance types
Download or read book Materials for Construction and Civil Engineering written by M. Clara Gonçalves and published by Springer. This book was released on 2015-03-03 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: · Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure · Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes · Addresses topics important to professionals working with structural materials, such as corrosion, nanomaterials, materials life cycle, not often covered outside of journal literature · Diverse author team presents expect perspective from civil engineering, construction, and architecture · Features a detailed glossary of terms and over 400 illustrations
