Download or read book Chemical Engineering and Chemical Process Technology Volume V written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Chemical Process Technology written by Jacob A. Moulijn and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on actual industrial processes, e.g. the production of light alkenes, synthesis gas, fine chemicals, polyethene, it encourages the reader to think “out of the box” and invent and develop novel unit operations and processes. Reflecting today’s emphasis on sustainability, this edition contains new coverage of biomass as an alternative to fossil fuels, and process intensification. The second edition includes: New chapters on Process Intensification and Processes for the Conversion of Biomass Updated and expanded chapters throughout with 35% new material overall Text boxes containing case studies and examples from various different industries, e.g. synthesis loop designs, Sasol I Plant, Kaminsky catalysts, production of Ibuprofen, click chemistry, ammonia synthesis, fluid catalytic cracking Questions throughout to stimulate debate and keep students awake! Richly illustrated chapters with improved figures and flow diagrams Chemical Process Technology, Second Edition is a comprehensive introduction, linking the fundamental theory and concepts to the applied nature of the subject. It will be invaluable to students of chemical engineering, biotechnology and industrial chemistry, as well as practising chemical engineers. From reviews of the first edition: “The authors have blended process technology, chemistry and thermodynamics in an elegant manner... Overall this is a welcome addition to books on chemical technology.” – The Chemist “Impressively wide-ranging and comprehensive... an excellent textbook for students, with a combination of fundamental knowledge and technology.” – Chemistry in Britain (now Chemistry World)
Download or read book Chemical Engineering and Chemical Process Technology Volume II written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Chemical Engineering and Chemical Process Technology Volume IV written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Re Engineering the Chemical Processing Plant written by Andrzej Stankiewicz and published by CRC Press. This book was released on 2018-12-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first guide to compile current research and frontline developments in the science of process intensification (PI), Re-Engineering the Chemical Processing Plant illustrates the design, integration, and application of PI principles and structures for the development and optimization of chemical and industrial plants. This volume updates professionals on emerging PI equipment and methodologies to promote technological advances and operational efficacy in chemical, biochemical, and engineering environments and presents clear examples illustrating the implementation and application of specific process-intensifying equipment and methods in various commercial arenas.
Download or read book Chemical Process Technology and Simulation written by SRIKUMAR KOYIKKAL and published by PHI Learning Pvt. Ltd.. This book was released on 2013-04-08 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to apprise the students of chemical engineering with a variety of different processes of chemical technologies. The book is richly illustrated and covers the essential information with the help of flow diagrams, enabling the students to gain a full understanding of both the fundamental concepts and chemical reactions involved in process technologies. Newer technologies have been dealt with and some technologies which have lost their relevance have been omitted. Computer simulation methods have been described for many important technologies. In short, the book considers computer design tools and design software, in a manner that integrates this knowledge smoothly into the main subject. The book is expected to become useful not only to the students for courses in Chemical Technology but also to practising engineers and process designers for innovative process development. There are topics on natural products and fermentation process chemicals, organic chemicals, inorganic chemicals, refinery operations, oil and gas operations and nanotechnology products. In some of these topics, computer simulation and costing examples are included. An illustration of modelling and simulation using C++, is also given as an example of user-written programs for simulation. Another method that can be used for simulation is the use of spreadsheets, which is also described with the help of an example. A new important topic of today being ‘polysilicon’ used in the manufacture of computer chips and solar panels, is also covered in detail.
Download or read book Chemical Engineering and Chemical Process Technology Volume I written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Chemical Engineering and Chemical Process Technology written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Chemical Process Technology written by P.J. van den Berg and published by Springer. This book was released on 1980-07-31 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering and Chemical Process Technology Volume III written by Ryzhard Pohorecki and published by EOLSS Publications. This book was released on 2010-11-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering and Chemical Process Technology is a theme component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Chemical engineering is a branch of engineering, dealing with processes in which materials undergo changes in their physical or chemical state. These changes may concern size, energy content, composition and/or other application properties. Chemical engineering deals with many processes belonging to chemical industry or related industries (petrochemical, metallurgical, food, pharmaceutical, fine chemicals, coatings and colors, renewable raw materials, biotechnological, etc.), and finds application in manufacturing of such products as acids, alkalis, salts, fuels, fertilizers, crop protection agents, ceramics, glass, paper, colors, dyestuffs, plastics, cosmetics, vitamins and many others. It also plays significant role in environmental protection, biotechnology, nanotechnology, energy production and sustainable economical development. The Theme on Chemical Engineering and Chemical Process Technology deals, in five volumes and covers several topics such as: Fundamentals of Chemical Engineering; Unit Operations – Fluids; Unit Operations – Solids; Chemical Reaction Engineering; Process Development, Modeling, Optimization and Control; Process Management; The Future of Chemical Engineering; Chemical Engineering Education; Main Products, which are then expanded into multiple subtopics, each as a chapter. These five volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Chemical Technology written by Andreas Jess and published by John Wiley & Sons. This book was released on 2013-03-11 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides an integral and integrated treatment of industrial-relevant problems for students of both chemistry and chemical engineering. As such, this work combines the four disciplines of chemical technology - chemistry, thermal and mechanical unit operations, chemical reaction engineering and general chemical technology - and is organized into two main parts. The first covers the fundamentals, as well as the analysis and design of industrial processes, while the second section presents 20 concrete processes, exemplifying the inherent applied nature of chemical technology. These are selected so that they all differ with respect to at least one important aspect, such as the type and design of the reactor, the chemistry involved or the separation process used. As a result, readers will recapitulate, deepen and exercise the chemical and engineering principles and their interplay, as well as being able to apply them to industrial practice. Instructive figures, rules of thumb for swift but reliable estimating of parameters, data of chemical media, and examples utilizing data from industrial processes facilitate and enhance the study process. A small general survey of selected modern trends, such as multifunctional and micro reactors, or new solvents for homogeneous catalysis, such as ionic liquids, point out to the reader that this is not a concluded discipline, but a developing field with many challenges waiting to be solved.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Chemical Engineering and Chemical Process Technology written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Process Technology written by Jacob A. Moulijn and published by Wiley. This book was released on 2001-04-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Process Technology is a comprehensive introduction, examining both the fundamental concepts and applied nature of this subject. Modern process development relies on a knowledge of many different disciplines and an application and integration of this knowledge. The book provides an essential bridge between the chemical sciences and the chemical industry. It enables the reader to integrate fundamental knowledge of the basic disciplines, to understand the most important chemical processes, and to apply this knowledge and understanding to industrial processes. The text examines both large-scale and small-scale chemical and biotechnology industries and brings to life the concepts that form the basis of the process industry. Starting with a general look at the industry, subsequent chapters examine different processes in greater detail. Emphasis is placed on chemical reactions and the reactor, both at the heart of each process, but coverage also includes feed pre-treatment and product separation. Key Features: A comprehensive and balanced introduction, providing an essential link between chemistry and the chemical industry Includes problems with their solutions to encourage a fuller understanding of the project Many examples and case studies taken from a variety of modern industries Richly illustrated chapters, with many clearly developed flow diagrams and numerous figures
Download or read book Chemical Engineering and Chemical Process Technology written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Process Design and Integration written by Robin Smith and published by John Wiley & Sons. This book was released on 2016-09-26 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a highly regarded author with industrial and academic experience, this new edition of an established bestselling book provides practical guidance for students, researchers, and those in chemical engineering. The book includes a new section on sustainable energy, with sections on carbon capture and sequestration, as a result of increasing environmental awareness; and a companion website that includes problems, worked solutions, and Excel spreadsheets to enable students to carry out complex calculations.
Download or read book Introduction to Chemical Engineering written by Uche P. Nnaji and published by John Wiley & Sons. This book was released on 2019-10-10 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of chemical engineering is undergoing a global “renaissance,” with new processes, equipment, and sources changing literally every day. It is a dynamic, important area of study and the basis for some of the most lucrative and integral fields of science. Introduction to Chemical Engineering offers a comprehensive overview of the concept, principles and applications of chemical engineering. It explains the distinct chemical engineering knowledge which gave rise to a general-purpose technology and broadest engineering field. The book serves as a conduit between college education and the real-world chemical engineering practice. It answers many questions students and young engineers often ask which include: How is what I studied in the classroom being applied in the industrial setting? What steps do I need to take to become a professional chemical engineer? What are the career diversities in chemical engineering and the engineering knowledge required? How is chemical engineering design done in real-world? What are the chemical engineering computer tools and their applications? What are the prospects, present and future challenges of chemical engineering? And so on. It also provides the information new chemical engineering hires would need to excel and cross the critical novice engineer stage of their career. It is expected that this book will enhance students understanding and performance in the field and the development of the profession worldwide. Whether a new-hire engineer or a veteran in the field, this is a must—have volume for any chemical engineer’s library.