Download or read book Chemical Electrostatics written by Fernando Galembeck and published by Springer. This book was released on 2017-03-09 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides new clues for understanding electrostatic charging in solids and liquids, resulting from the surge of research in this active area of science that is taking place since the 1990's but is still largely unknown to most researchers, lecturers and engineers. Written by a leading researcher in this field, this book describes the formation and properties of the Earth capacitor, the production of environmental electricity and its effect on natural and anthropic systems and examines many situations in which water may play a decisive role in electrostatic behavior. The authors present an informed critique of the long-held assumption that pure substances should be electroneutral. In this regard, the authors show that charge partition and accumulation is expected considering the electrochemical potential under non-zero electrostatic potential, which prevails at Earth surface. This book provides conceptual tools to guide the reader through the complexities and consequences of electrostatic phenomena while covering exciting current topics such as energy scavenging from the environment, electrostatic based green production, energy-saving processes, electrochemistry at the solid-gas interface, therapeutic electrostatic treatments, applications in sanitation and pest control and control of atmospheric electricity and its use in climate engineering.
Download or read book Molecular Electrostatic Potentials written by J.S. Murray and published by Elsevier. This book was released on 1996-11-22 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 25 years, the molecular electrostatic potential has become firmly established as an effective guide to molecular interactions. With the recent advances in computational technology, it is currently being applied to a variety of important chemical and biological systems. Its range of applicability has expanded from primarily a focus on sites for electrophilic and nucleophilic attack to now include solvent effects, studies of zeolite, molecular cluster and crystal behavior, and the correlation and prediction of a wide range of macroscopic properties. Moreover, the increasing prominence of density functional theory has raised the molecular electrostatic potential to a new stature on a more fundamental conceptual level. It is rigorously defined in terms of the electron density, and has very interesting topological characteristics since it explicitly reflects opposing contributions from the nuclei and the electrons. This volume opens with a survey chapter by one of the original pioneers of the use of the electrostatic potential in studies of chemical reactivity, Jacopo Tomasi. Though the flow of the succeeding chapters is not stringently defined, the overall trend is that the emphasis changes gradually from methodology to applications. Chapters discussing more theoretical topics are placed near the end. Readers will find the wide variety of topics provided by an international group of authors both convincing and useful.
Download or read book Chemical Applications of Atomic and Molecular Electrostatic Potentials written by Peter Politzer and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: On March 26-27, 1980, a symposium organized by one of us (P. P. ) was held at the l79th American Chemical Society National ~1eeting in Houston, Texas, under the sponsorship of the Theoretical Chemistry Subdivision of the Division of Physical Chemistry. The symposium was entitled "The Role of the Electrostatic Potential in Chemistry," and it served as a stimulus for this book. The original scope and coverage have been broadened, however; included here, in addition to contributions from the eleven invited symposium speakers and two of the poster-session participants, are four papers that were specially invited for this book. Furthermore, several authors have taken this opportunity to present at least partial reviews of the areas being discussed. Most of the manuscripts were completed in the late spring and early summer of 1980. We hope that this book will achieve two goals: First, we are trying to provide an overall picture, including recent advances, of current chemical research, both fundamental and applied, involving the electrostatic potential. Second, we want to convey an appreci ation of both the powers and also the limitations of the electro static potential approach. In order to achieve these goals, we have selected contributors whose research areas provide a very broad coverage of the field. Throughout the book, we have used a. u.
Download or read book Electrostatics of Atoms and Molecules written by Shridhar R. Gadre and published by Universities Press. This book was released on 2000 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the subject of molecular electrostatics to postgraduate students, teachers and young researchers in chemistry, physics and biology. It discusses rigorous as well as applied aspects of the molecular electrostatic potential (MESP) and provides an essence of relevant mathematical arguments, without going into detailed derivations. A number of color illustrations highlight the salient features of MESP.
Download or read book Avoiding Static Ignition Hazards in Chemical Operations written by Laurence G. Britton and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by Laurence Britton, who has over 20 years' experience in the fields of static ignition and process fire and explosion hazards research, this resource addresses an area not extensively covered in process safety standards or literature: understanding and reducing potential hazards associated with static electricity. The book covers the nature of static electricity, characteristics and effective energies of different static resources, techniques for evaluating static electricity hazards, general bonding, grounding, and other techniques used to control static or prevent ignition, gases and liquids, powders and hybrid mixtures.
Download or read book Electrostatics at the Molecular Level written by Ulrich Zürcher and published by Morgan & Claypool Publishers. This book was released on 2018-10-24 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic forces are essential for the hierarchical structure of matter: electrons are bound to the atomic nucleus by electrostatic forces; atoms carry (partial) charges and ions with opposite charges attract and form (chemical) bonds. Small residual electrostatic forces between molecules allow them to form macroscopic structures such as crystals. Electrostatic interactions explain pseudo-forces used in popular computer programs used to model properties of atoms, molecules, and proteins. By beginning with the basics and then diving deeper into the topic, this book aims to familiarize the reader with electrostatic forces at the atomic and molecular level.
Download or read book Electrostatic Ignitions of Fires and Explosions written by Thomas H. Pratt and published by John Wiley & Sons. This book was released on 2010-09-07 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tom Pratt, a long-time process safety practitioner and lecturer in electrostatic safety, wrote this book to educate industry in the basics of electrostatics. It offers a selected collection of information designed to give readers the tools they need to examine the hazard potential of common industrial processes. Among the topics addressed are separation and accumulation of charge, discharge, minimum ignition energies, discharge energies, electrification in industrial processes, design and operating criteria, measurements, quantification of electrostatic scenarios. A selection of case histories helps illustrate sources of electrostatic ignition of combustibles, and strategies for preventing such incidents.
Download or read book Electrostatics 1999 Proceedings of the 10th INT Conference Cambridge UK 28 31 March 1999 written by D.M. Taylor and published by CRC Press. This book was released on 1999-01-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatics 1999: Proceedings of the 10th INT Conference, Cambridge, UK, 28-31 March 1999 provides an overview of recent research in electrostatics and an insight into the multifarious applications for electrostatics in industry. This comprehensive reference is ideal for researchers in physics, chemistry, and engineering who work in electrostati
Download or read book Advances in Quantum Chemistry written by and published by Academic Press. This book was released on 1979-02-12 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Quantum Chemistry
Download or read book Powder Handling and Electrostatics written by Thomas B. Jones and published by CRC Press. This book was released on 1991-06-24 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this manual is safe practice for avoiding electrostatic discharge hazards in the manufacturing and processing of chemical and plastic powders. It is written with the practicing engineer and plant technician in mind. Practical information to enhance the process safety is provided in straightforward terms. The manual describes the basic phenomena of powder electrostatics, giving special emphasis to polymer powders. The identified types of electrostatic discharges are discussed and explanations of the conditions that favor or inhibit each type are given. A number of industrial incidents where ESD-induced dust ignitions occurred are reviewed, with the authors contributing their own views on causes and preventive measures. The important quantitative measures of electrostatic hazards are identified, along with the methods needed to perform meaningful measurements. Concrete recommendations, based on the authors' experience, are provided in the form of a list of "Do's" and "Don'ts" applicable in the plant environment. Finally, appendices provide a wealth of useful background data plus an informative "Q and A" section covering practical engineering issues. This manual will be extremely useful to chemical plant engineers, operating and maintenance personnel, safety engineers, processing plant engineers, design engineers, and consultants, as well as persons in the chemical, pharmaceutical, plastic, and food handling industries.
Download or read book Electrostatics of Soft and Disordered Matter written by David S. Dean and published by CRC Press. This book was released on 2014-05-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, there has been a surge of activity to elucidate the behavior of highly charged soft matter and Coulomb fluids in general. Such systems are ubiquitous, especially in biological matter where the length scale and the strength of the interaction between highly charged biomolecules are governed by strong electrostatic effects. Several interesting limits have been discovered in the parameter space of highly charged many-particle Coulomb matter where analytical progress is possible and completely novel and unexpected results have been obtained. One of the challenges in highly charged matter is to correctly describe systems with finite coupling strength in the transition regime between weak and strong couplings. After studying the fluctuations of both, several theories have been developed that describe this experimentally highly relevant regime. At the same time, computer simulation algorithms and computing power have advanced to the level where all-ion simulations, including many-body and polarization effects, are possible; the new theories thus can be subjected to numerical confirmation. Another important question is the effect of the structural disorder on electrostatic interactions. It has recently been demonstrated, both theoretically and experimentally, that charge disorder can impose long-range interaction between charged or even uncharged surfaces. These interactions might become very significant in biological processes. Filling a void in the literature, this volume cross-pollinates different theoretical and simulation approaches with new experiments and ties together the low temperature, high coupling constant, and disorder parameters in a unified description of the electrostatic interactions, which largely determine the stability and conformations of most important biological macromolecules. With striking graphical illustrations, the book presents a unified view of the current advances in the field of Coulomb (bio)colloidal systems, building on previous literature that summarized the field over 20 years ago. Leading scientists in the field offer a detailed introduction to different modern methods in statistical physics of Coulomb systems. They detail various approaches to elucidate the behavior of strongly charged soft matter. They also provide experimental and theoretical descriptions of disorder effects in Coulomb systems, which have not been discussed in any other book.
Download or read book Proceedings of the Water Reuse Symposium II written by and published by . This book was released on 1981 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2012 with total page 1672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Modelling written by Alan Hinchliffe and published by Royal Society of Chemistry. This book was released on 2006 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Modelling: Applications and Theory comprises critical literature reviews of molecular modelling, both theoretical and applied. Molecular modelling in this context refers to modelling the structure, properties and reactions of atoms, molecules & materials. Each chapter is compiled by experts in their fields and provides a selective review of recent literature. With chemical modelling covering such a wide range of subjects, this Specialist Periodical Report serves as the first port of call to any chemist, biochemist, materials scientist or molecular physicist needing to acquaint themselves of major developments in the area. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading authorities in the relevant subject areas, the series creates a unique service for the active research chemist, with regular, in-depth accounts of progress in particular fields of chemistry. Subject coverage within different volumes of a given title is similar and publication is on an annual or biennial basis. Current subject areas covered are Amino Acids, Peptides and Proteins, Carbohydrate Chemistry, Catalysis, Chemical Modelling. Applications and Theory, Electron Paramagnetic Resonance, Nuclear Magnetic Resonance, Organometallic Chemistry. Organophosphorus Chemistry, Photochemistry and Spectroscopic Properties of Inorganic and Organometallic Compounds. From time to time, the series has altered according to the fluctuating degrees of activity in the various fields, but these volumes remain a superb reference point for researchers.
Download or read book The Chemical Bond in Inorganic Chemistry written by I. David Brown and published by Oxford University Press. This book was released on 2016-09-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bond valence model, a description of acid-base bonding, is widely used for analysing and modelling the structures and properties of solids and liquids. Unlike other models of inorganic chemical bonding, the bond valence model is simple, intuitive, and predictive, and is accessible to anyone with a pocket calculator and a secondary school command of chemistry and physics. This new edition of 'The Chemical Bond in Inorganic Chemistry: The Bond Valence Model' shows how chemical properties arise naturally from the conflict between the constraints of chemistry and those of three-dimensional space. The book derives the rules of the bond valence model, as well as those of the traditional covalent, ionic and popular VSEPR models, by identifying the chemical bond with the electrostatic flux linking the bonded atoms. Most of the new edition is devoted to showing how to apply these ideas to real materials including crystals, liquids, glasses and surfaces. The work includes detailed examples of applications, and the final chapter explores the relationship between the flux and quantum theories of the bond.
Download or read book Issues in Chemical Engineering and other Chemistry Specialties 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Chemical Engineering and other Chemistry Specialties: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Chemical Engineering. The editors have built Issues in Chemical Engineering and other Chemistry Specialties: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Chemical Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Chemical Engineering and other Chemistry Specialties: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Green Energetic Materials written by Tore Brinck and published by John Wiley & Sons. This book was released on 2014-01-15 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book presents a detailed account of research and recent developments in the field of green energetic materials, including pyrotechnics, explosives and propellants. This area is attracting increasing interest in the community as it undergoes a transition from using traditional processes, to more environmentally-friendly procedures. The book covers the entire line of research from the initial theoretical modelling and design of new materials, to the development of sustainable manufacturing processes. It also addresses materials that have already reached the production line, as well as considering future developments in this evolving field.
