Download or read book Handbook for the Chemical Analysis of Plastic and Polymer Additives written by Michael Bolgar and published by CRC Press. This book was released on 2015-09-25 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds u

Download or read book Chemical Analysis of Additives in Plastics written by T. R. Crompton and published by Elsevier. This book was released on 2016-07-29 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Series in Analytical Chemistry, Volume 46: Chemical Analysis of Additives in Plastics, Second Edition brings together numerous investigations on the characterization, identification, and determination of various types of additives in plastics. This book is divided into five chapters. Chapters 1 and 2 describe first the methods for examining additives present in polymers based on either direct spectroscopy of a cast polymer film or on solvent extraction of total additives from the polymer followed by quantitative chemical or physical analysis for various components in the extract. Chapter 3 discusses the application of thin-layer and column chromatography to the separation and determination of known additives. Chapters 4 and 5 examine the application of combined chromatographic and spectroscopic techniques for the separation and determination of unknown plastics additives. This book will prove useful to plastics manufacturers, researchers, institutions, and universities.

Download or read book Chemical Analysis of Additives in Plastics written by Thomas Roy Crompton and published by . This book was released on 1969 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Analysis of Additives in Plastics written by Thomas Roy Crompton and published by . This book was released on 1977 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Additives written by J.C.J. Bart and published by IOS Press. This book was released on 2006-03-15 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Cover-to-cover reading of Plastics Additives, Advanced Industrial Analysis, is recommended for both professional analysts and plastics technologists. Professor Bart’s prose style is easy to read. A professional background in analytical chemistry is not assumed. Particularly valuable is the trove of good advice as to which approach might be best in a given situation. Every department with a serious interest in additive / property relations should invest in a copy.” -- PMAD Newsletter. This industrially relevant and up-to-date resource deals with all established and emerging analytical methods for in-polymer additive analysis of plastics formulations. Quality assurance and industrial troubleshooting all benefit from direct analysis modes. Plastics Additives comprises detailed coverage of solid-state spectroscopy, thermal analysis and pyrolysis, laser techniques, surface studies and microanalysis along with process analytics, quantitative analysis and modern method development and validation applied to additives in polymers. The book is organised for quick and easy reference and is extensively illustrated with over 200 figures, 300 flow diagrams and tables to facilitate rapid understanding of this topic, and it contains 4000 references. Emphasis is on understanding (principles and characteristics) and industrial applicability.

Download or read book Atlas of Plastics Additives written by Dietrich O. Hummel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must for experts in industry, this book describes the application of vibrational (FTIR, UV, Raman) and mass spectrometries and other instrumental techniques for identification and structure elucidation of plastics additives. Numerous tables and figures compress the state of the art.

Download or read book Additives for Plastics written by Jan Stipek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by a theoretical analysis of the practical and technological importance of the ad ditive. The book is mainly intended for students in technical colleges, polytechnics and universities who are studying plastics technology and macromolecular chemistry as part of their general curriculum and for technologists in industry engaged in development, sales, technical service and production functions, and applications of plastics. An elementary knowledge of chemistry, physical chemistry and polymer science at the technical college level is assumed. Prague and Montreal, December 1982 J. Stepek, H. Daoust Table of Contents Introduction .

Download or read book Plastics Additives Volume 1 written by Ernest W. Flick and published by Elsevier. This book was released on 2013-10-22 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and its companion volumes contain plastics additives formulations based on information received from numerous industrial companies and other organizations. Each formulation is identified by a description of its end use.

Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

Download or read book Chemical analysis of additives in plastics by T R Crompton written by T. R. Crompton and published by . This book was released on 1971 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Atlas of Plastics Additives written by Dieter O. Hummel and published by Springer Verlag. This book was released on 2002-01-01 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumental, especially spectrometric, methods are widely used in analytical laboratories for identification and quantitative determination of complex organic systems. In this book, the author describes the application of vibrational (FTIR, UV, Raman) and mass spectrometries and other instrumental techniques for identification and structure elucidation of plastics additives, e.g., antioxidants, stabilizers, plasticizers, pigments, and rubber chemicals. The state of the art is condensed in numerous tables and figures, including an impressive collection of the FTIR spectra of 780 selected additives, together with structures and legends.

Download or read book Manual of Plastics Analysis written by T.R Crompton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing over 100 chemical and physical methods for analysis of polymers, Manual of Plastics Analysis is so detailed and comprehensive that chemists can apply the methods - many previously unpublished - directly from the book. A genuine laboratory manual, the volume supplies prodigious amounts of up-to-date information on all types of polymers, polymer additives, volatiles, adventitious impurities, monomers, metals, and pigments. Extremely well-suited for classroom teaching, research, or industrial applications, the book contains numerous tables and figures, as well as many chemical equations illustrating its analytical techniques.

Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.

Download or read book Additives in Polymers written by Alexandr A. Berlin and published by CRC Press. This book was released on 2016-01-05 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives are selected depending on the type of polymers to which they will be added or the application for which they will be used. The appropriate selection of additives helps develop value-added plastics with improved durability as well as other advantages. This research book provides a range of modern techniques and new research on the use of a

Download or read book The Analysis of Plastics written by R Belcher and published by Elsevier. This book was released on 2013-10-22 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering all aspects of the analysis of plastics by chemical and physical methods, this book is based on both the author's personal experience and on a complete review of world literature on the subject. Each of the eight chapters deals with a particular polymer or group of polymers and copolymers and terpolymers are also fully discussed. In addition to the analysis of the polymers the analysis of non-polymer components of the polymer, whether adventicious (water, solvents, monomers, catalyst residues, etc.) or deliberately added (processing additives, antioxidants, plasticisers, etc.) is covered at the end of the chapter or section.

Download or read book Determination of Additives in Polymers and Rubbers written by Thomas Roy Crompton and published by iSmithers Rapra Publishing. This book was released on 2007 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a practical text for use in the laboratories of the plastic producer and user industries and by others such as universities and institutions who are concerned with problems associated with additives and adventitious impurities in polymers. For example, powerful new analytical tools have been made available to the chemist by a combination of various chromatographic techniques with methods of identifying separated additives and their degradation products by techniques based on infrared and mass spectrometry. In particular supercritical fluid chromatography combined with m.

Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues