Download or read book Charge Carrier Transport and Injection Across Organic Heterojunctions written by Sai Wing Tsang and published by . This book was released on 2009 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery of highly efficient organic light-emitting diodes (OLEDs) in the 1980s has stimulated extensive research on organic semiconductors and devices. Underlying this breakthrough is the realization of the organic heterojunction (OH). Besides OLEDs, the implementation of the OH also significantly improves the power conversion efficiency in organic photovoltaic cells (OPVs). The continued technological advancements in organic electronic devices depend on the accumulation of knowledge of the intrinsic properties of organic materials and related interfaces. Among them, charge-carrier transport and carrier injection are two key factors that govern the performance of a device.From the point of view of application, an interface chemical doping method is proposed to engineer the carrier injection at an organic heterojunction. It is found that the injection current can be effectively increased or suppressed by introducing a thin (2 nm) doped organic layer at the interface. This technique is further extended to study the impact of an injection barrier at the OH, in OLEDs, on device performance. It is shown that a 0.3 eV injection barrier at the OH, that is normally negligible at metal/organic interface, can reduce the device efficiency by 25%. This is explained by the carrier distribution in the density-of-states at the OH.Furthermore, the carrier transport properties in a bulk heterojunction system are investigated. The bulk heterojunction consists of an interpenetrating network of a polymeric electron donor and a molecular electron acceptor. This material system has been studied in the last few years as an attractive power conversion efficiency (5% under AM 1.5) of OPV cells has been demonstrated. It is found that the electron mobility is greatly dependent on the thermal treatment of the film. Interfacial dipole effect at the heterojunction between the donor and the acceptor is proposed to be the determining factor that alters the carrier mobility in different nanoscale structures.This thesis mainly focuses on the charge carrier injection and transport at organic heterojunctions. The carrier transport properties of different organic materials used in this study are characterized by time-of-flight (TOF) and admittance spectroscopy (AS). An injection model is formulated by considering the carrier distribution at both sides of the interface. Using a steady-state simulation approach, the effect of accumulated charges on energy level alignment at OH is revealed. Instead of a constant injection barrier, it is found that the barrier varies with applied voltage. Moreover, an escape probability function in the injection model is modified by taking into account the total hopping rate and available hopping sites at the interface. The model predicts that the injection current at low temperature can be dramatically modified by an extremely small density of deep trap states. More importantly, the temperature dependence of the injection current is found to decrease with increasing barrier height. This suggests that extracting the barrier height from the J vs 1/T plot, as commonly employed in the literature, is problematic. These theoretical predictions are confirmed by a series of experiments on heterojunction devices with various barrier heights. In addition, the presence of deep trap states is also consistent with carrier mobility measurements at low temperature.
Download or read book Charge Carrier Transport and Injection Across Organic Heterojunctions written by Tsang Sai Wing and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solution Processable Components for Organic Electronic Devices written by Beata Luszczynska and published by John Wiley & Sons. This book was released on 2019-06-11 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides first-hand insights into advanced fabrication techniques for solution processable organic electronics materials and devices The field of printable organic electronics has emerged as a technology which plays a major role in materials science research and development. Printable organic electronics soon compete with, and for specific applications can even outpace, conventional semiconductor devices in terms of performance, cost, and versatility. Printing techniques allow for large-scale fabrication of organic electronic components and functional devices for use as wearable electronics, health-care sensors, Internet of Things, monitoring of environment pollution and many others, yet-to-be-conceived applications. The first part of Solution-Processable Components for Organic Electronic Devices covers the synthesis of: soluble conjugated polymers; solution-processable nanoparticles of inorganic semiconductors; high-k nanoparticles by means of controlled radical polymerization; advanced blending techniques yielding novel materials with extraordinary properties. The book also discusses photogeneration of charge carriers in nanostructured bulk heterojunctions and charge carrier transport in multicomponent materials such as composites and nanocomposites as well as photovoltaic devices modelling. The second part of the book is devoted to organic electronic devices, such as field effect transistors, light emitting diodes, photovoltaics, photodiodes and electronic memory devices which can be produced by solution-based methods, including printing and roll-to-roll manufacturing. The book provides in-depth knowledge for experienced researchers and for those entering the field. It comprises 12 chapters focused on: ? novel organic electronics components synthesis and solution-based processing techniques ? advanced analysis of mechanisms governing charge carrier generation and transport in organic semiconductors and devices ? fabrication techniques and characterization methods of organic electronic devices Providing coverage of the state of the art of organic electronics, Solution-Processable Components for Organic Electronic Devices is an excellent book for materials scientists, applied physicists, engineering scientists, and those working in the electronics industry.
Download or read book Organic Conductors written by Jean-Pierre Farges and published by CRC Press. This book was released on 2022-09-16 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work examines all aspects of organic conductors, detailing recent theoretical concepts and current laboratory methods of synthesis, measurement, control and analysis. It describes advances in molecular-scale engineering, including switching and memory systems, Schottky and electroluminescent diodes, field-effect transistors, and photovoltaic devices and solar cells.
Download or read book Optoelectronic Devices and Properties written by Oleg Sergiyenko and published by BoD – Books on Demand. This book was released on 2011-04-19 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optoelectronic devices impact many areas of society, from simple household appliances and multimedia systems to communications, computing, spatial scanning, optical monitoring, 3D measurements and medical instruments. This is the most complete book about optoelectromechanic systems and semiconductor optoelectronic devices; it provides an accessible, well-organized overview of optoelectronic devices and properties that emphasizes basic principles.
Download or read book Spin Polarized Charge Carrier Injection Transport and Detection in Organic Semiconductors written by Mohammad Yunus and published by . This book was released on 2011 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conducting Organic Materials and Devices written by Suresh C. Jain and published by Newnes. This book was released on 2011-08-09 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conducting polymers were discovered in 1970s in Japan. Since this discovery, there has been a steady flow of new ideas, new understanding, new conducing polymer (organics) structures and devices with enhanced performance. Several breakthroughs have been made in the design and fabrication technology of the organic devices. Almost all properties, mechanical, electrical, and optical, are important in organics. This book describes the recent advances in these organic materials and devices.
Download or read book Organic Semiconductor Heterojunctions and Its Application in Organic Light Emitting Diodes written by Dongge Ma and published by Springer. This book was released on 2017-09-21 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces the most important aspects of organic semiconductor heterojunctions, including the basic concepts and electrical properties. It comprehensively discusses the application of organic semiconductor heterojunctions as charge injectors and charge generation layers in organic light-emitting diodes (OLEDs). Semiconductor heterojunctions are the basis for constructing high-performance optoelectronic devices. In recent decades, organic semiconductors have been increasingly used to fabricate heterojunction devices, especially in OLEDs, and the subject has attracted a great deal of attention and evoked many new phenomena and interpretations in the field. This important application is based on the low dielectric constant of organic semiconductors and the weak non-covalent electronic interactions between them, which means that they easily form accumulation heterojunctions. As we know, the accumulation-type space charge region is highly conductive, which is an important property for highly efficient charge generation in their application as charge injector and charge generation layer in OLEDs. This book serves as a valuable reference for researchers and as a textbook for graduate students focusing on the study and development of OLED for display and lighting.
Download or read book Introduction to Organic Semiconductor Heterojunctions written by Donghang Yan and published by John Wiley & Sons. This book was released on 2010-09-16 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that most important electronic devices use Schottky junctions and heterojunctions. Unfortunately there is not an advanced book introducing heterojunctions systematically. Introduction to Organic Semiconductor Heterojunctions fills the gap. In this book, the authors provide a comprehensive discussion and systematic introduction on the state-of-the-art technologies as well as application of organic semiconductor heterojunctions. First book to systematically introduce organic heterojunctions Arms readers with theoretical, experimental and applied aspects of organic heterojunctions The Chinese edition of the book is part of the Chinese Academy of Sciences’ Distinguished Young Scholar Scientific Book Series Introduction to Organic Semiconductor Heterojunctions is an ideal and valued reference for researchers and graduate students focusing on organic thin film devices like organic light-emitting diodes (OLEDs), organic photovoltaic (OPV) cells, and organic field-effect transistors (OFETs). Instructors can use the book as a supplementary text for a semiconductor physics or organic electronics course, giving students a better feel for the application of organic thin film devices.
Download or read book Physics of Organic Semiconductors written by Wolfgang Brütting and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic electronics has seen a steady growth over the last 15 years. At the same time, our scientific understanding of how to achieve optimum device performance has grown, and this book gives an overview of our present-day knowledge of the physics behind organic semiconductor devices. Based on the very successful first edition, the editors have invited top scientists from the US, Japan, and Europe to include the developments from recent years, covering such fundamental issues as: - growth and characterization of thin films of organic semiconductors, - charge transport and photophysical properties of the materials as well as their electronic structure at interfaces, and - analysis and modeling of devices like organic light-emitting diodes or organic lasers. The result is an overview of the field for both readers with basic knowledge and for an application-oriented audience. It thus bridges the gap between textbook knowledge largely based on crystalline molecular solids and those books focusing more on device applications.
Download or read book Chemistry of Functional Materials Surfaces and Interfaces written by Andrei Honciuc and published by Elsevier. This book was released on 2021-02-19 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Functional Materials Surfaces and Interfaces: Fundamentals and Applications gives a descriptive account of interfacial phenomena step-by-step, from simple to complex, to provide readers with a strong foundation of knowledge in interfacial materials chemistry. Many case studies are provided to give real-world examples of problems and their solutions, allowing readers to make the connection between fundamental understanding and applications. Emerging applications in nanomaterials and nanotechnology are also discussed. Throughout the book, the author explains the common interface and surface equations, models, methods, and applications in the creation of functional materials. The goal of Chemistry of Functional Materials Surfaces and Interfaces is to provide readers with the basic understanding of the common tools of surface and interface chemistry for application in materials science and nanotechnology. This book is suitable for researchers and practitioners in the disciplines of materials science and engineering and surface and interface chemistry. Includes numerous real-world examples and case studies throughout Addresses emerging applications of interfacial materials chemistry in nanomaterials and nanotechnology Provides the foundational concepts of surface and interfacial science with models, equation, and methods
Download or read book Organic Solar Cells written by Barry P. Rand and published by CRC Press. This book was released on 2014-08-26 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic photovoltaic (OPV) cells have the potential to make a significant contribution to the increasing energy needs of the future. In this book, 15 chapters written by selected experts explore the required characteristics of components present in an OPV device, such as transparent electrodes, electron- and hole-conducting layers, as well as elect
Download or read book Handbook of Nanomaterials for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2018-07-19 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanomaterials for Industrial Applications explores the use of novel nanomaterials in the industrial arena. The book covers nanomaterials and the techniques that can play vital roles in many industrial procedures, such as increasing sensitivity, magnifying precision and improving production limits. In addition, the book stresses that these approaches tend to provide green, sustainable solutions for industrial developments. Finally, the legal, economical and toxicity aspects of nanomaterials are covered in detail, making this is a comprehensive, important resource for anyone wanting to learn more about how nanomaterials are changing the way we create products in modern industry. Demonstrates how cutting-edge developments in nanomaterials translate into real-world innovations in a range of industry sectors Explores how using nanomaterials can help engineers to create innovative consumer products Discusses the legal, economical and toxicity issues arising from the industrial applications of nanomaterials
Download or read book Issues in Nuclear High Energy Plasma Particle and Condensed Matter Physics 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 2502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics. The editors have built Issues in Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Nuclear, High Energy, Plasma, Particle, and Condensed Matter Physics: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Conjugated Polymer And Molecular Interfaces written by William R. Salaneck and published by CRC Press. This book was released on 2001-10-18 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defines the state-of-the-art in interface science for electronic applications of organic materials. Updates understanding of the foundaiton of interfacial properties. Describes novel electronic devices created from conjugated polymers and organic molecular solids.
Download or read book Energy Efficiency and Renewable Energy Through Nanotechnology written by Ling Zang and published by Springer Science & Business Media. This book was released on 2011-09-06 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the rapid growth of nanotechnology research and the potential impact of the growing energy crisis, Energy Efficiency and Renewable Energy Through Nanotechnology provides comprehensive coverage of cutting-edge research in the energy-related fields of nanoscience and nanotechnology, which aim to improve energy efficiency and the generation of renewable energy. Energy Efficiency and Renewable Energy Through Nanotechnology tightly correlates nanotechnology with energy issues in a general, comprehensive way that makes it not only suitable as a desk reference for research, but also as a knowledge resource for the non-expert general public. Readers will find Energy Efficiency and Renewable Energy Through Nanotechnology useful in a variety of ways, ranging from the creation of energy policy, to energy research development, and to education in nanotechnology and its application to energy-related problems. It can also be used as a primary or supplementary textbook for energy-related courses for advanced undergraduate and graduate students.
Download or read book Organic Electronics II written by Hagen Klauk and published by John Wiley & Sons. This book was released on 2012-03-26 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like its predecessor this book is devoted to the materials, manufacturing and applications aspects of organic thin-film transistors. Once again authored by the most renowned experts from this fascinating and fast-moving area of research, it offers a joint perspective both broad and in-depth on the latest developments in the areas of materials chemistry, transport physics, materials characterization, manufacturing technology, and circuit integration of organic transistors. With its many figures and detailed index, this book once again also serves as a ready reference.
