Download or read book Characterization of Weak and Weathered Rock Masses written by Paul Michael Santi and published by . This book was released on 1997 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Rock Mass Classification written by R K Goel and published by Elsevier. This book was released on 2011-08-09 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. Identify the most significant parameters influencing the behaviour of a rock mass Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality Provide a basis of understanding the characteristics of each rock mass class Relate the experience of rock conditions at one site to the conditions and experience encountered at others Derive quantitative data and guidelines for engineering design Provide common basis for communication between engineers and geologists
Download or read book Rock characterization written by John A. Hudson and published by Thomas Telford. This book was released on 1992 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Geology for Society and Territory Volume 6 written by Giorgio Lollino and published by Springer. This book was released on 2014-08-30 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one out of 8 IAEG XII Congress volumes, and deals with the theme of applied geology, which is a critical theme for the global economy. In the international, multidisciplinary approach to major engineering projects (either to macro- or mega-scale), the application of geological investigation techniques is fundamental for properly selecting the location sites, planning the construction and maintaining the infrastructures. The contributions in this book include not only engineering constructions but also case studies related to large projects on geo-resources exploration and extraction (minerals, petroleum and groundwater), energy production (hydropower, geothermal, nuclear and others), transportation (railway and highway) and waste disposal as well as the environmental management of these and other activities. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: Environment, processes, issues, and approaches. The congress topics and subject areas of the 8 IAEG XII Congress volumes are: 1. Climate Change and Engineering Geology 2. Landslide Processes 3. River Basins, Reservoir Sedimentation and Water Resources 4. Marine and Coastal Processes 5. Urban Geology, Sustainable Planning and Landscape Exploitation 6. Applied Geology for Major Engineering Projects 7. Education, Professional Ethics and Public Recognition of Engineering Geology 8. Preservation of Cultural Heritage.
Download or read book Engineering Geology for Infrastructure Planning in Europe written by Robert Hack and published by Springer Science & Business Media. This book was released on 2004-04-28 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologists and civil engineers related to infrastructure planning, design and building describe professional practices and engineering geological methods in different European infrastructure projects.
Download or read book Underground Infrastructure of Urban Areas 4 written by Cezary Madryas and published by CRC Press. This book was released on 2017-09-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground infrastructure undoubtedly constitutes one of the most important engineering equipments of urbanized areas. It includes energy distribution, communications and water, carry away sewage, transportation systems of goods and people, storage facilities of articles, liquids and gases, and commercial, recreational and research activities and other functions. Underground Infrastructure of Urban Areas 4 is dedicated to the research, design, implementation and maintenance of infrastructure systems, as well as communication tunnels and building structures (garages, tanks, etc.) in urbanized areas. The book collects contributions from several countries, presenting current scientific and technical issues associated with this area of the building industry. Both theoretical issues and cases studies on the design, execution and testing of underground infrastructures at expertise and scientific levels are included in the book. Presenting the state-of-the-art in underground infrastructure of urbanized areas, Underground Infrastructure of Urban Areas 4 aims at academics, designers and builders of structures, producers and suppliers of building materials, equipment, and underground structures, and also to those managing and maintaining these structures.
Download or read book Earth Science for Civil and Environmental Engineers written by Richard E. Jackson and published by Cambridge University Press. This book was released on 2019-01-24 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the fundamental principles of applied Earth science needed for engineering practice, with case studies, exercises, and online solutions.
Download or read book An Introduction to Rock Mass Characterization written by J. Paul Guyer and published by . This book was released on 2019-10-06 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and geotechnical engineers and construction managers interested in design and construction in rock masses. Here is what is discussed:1. GEOLOGIC DESCRIPTIONS2. ROCK MASS CLASSIFICATION3. SHEAR STRENGTH4. ROCK FAILURE CHARACTERISTICS5. FAILURE CRITERIA6. SHEAR STRENGTH TESTS7. SELECTION OF DESIGN SHEAR STRENGTH PARAMETERS8. DEFORMATION AND SETTLEMENT9. TEST METHODS FOR ESTIMATING MODULUS10. OTHER METHODS FOR ESTIMATING MODULUS11. CONSIDERATIONS IN SELECTING DESIGN MODULUS VALUES.
Download or read book Engineering Rock Mass Classifications written by Z. T. Bieniawski and published by John Wiley & Sons. This book was released on 1989-08-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first authoritative reference on rock mass classification, consolidating into one handy source information once widely scattered throughout the literature. It includes new, previously unpublished material and case histories, presents the fundamental concepts of classification schemes, and critically appraises their practical application in industrial projects such as tunneling and mining.
Download or read book Guidelines for Open Pit Slope Design in Weak Rocks written by Derek Martin and published by CSIRO PUBLISHING. This book was released on 2018-01-10 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weak rocks encountered in open pit mines cover a wide variety of materials, with properties ranging between soil and rock. As such, they can provide a significant challenge for the slope designer. For these materials, the mass strength can be the primary control in the design of the pit slopes, although structures can also play an important role. Because of the typically weak nature of the materials, groundwater and surface water can also have a controlling influence on stability. Guidelines for Open Pit Slope Design in Weak Rocks is a companion to Guidelines for Open Pit Slope Design, which was published in 2009 and dealt primarily with strong rocks. Both books were commissioned under the Large Open Pit (LOP) project, which is sponsored by major mining companies. These books provide summaries of the current state of practice for the design, implementation and assessment of slopes in open pits, with a view to meeting the requirements of safety, as well as the recovery of anticipated ore reserves. This book, which follows the general cycle of the slope design process for open pits, contains 12 chapters. These chapters were compiled and written by industry experts and contain a large number of case histories. The initial chapters address field data collection, the critical aspects of determining the strength of weak rocks, the role of groundwater in weak rock slope stability and slope design considerations, which can differ somewhat from those applied to strong rock. The subsequent chapters address the principal weak rock types that are encountered in open pit mines, including cemented colluvial sediments, weak sedimentary mudstone rocks, soft coals and chalk, weak limestone, saprolite, soft iron ores and other leached rocks, and hydrothermally altered rocks. A final chapter deals with design implementation aspects, including mine planning, monitoring, surface water control and closure of weak rock slopes. As with the other books in this series, Guidelines for Open Pit Slope Design in Weak Rocks provides guidance to practitioners involved in the design and implementation of open pit slopes, particularly geotechnical engineers, mining engineers, geologists and other personnel working at operating mines.
Download or read book Annual Meeting written by Association of Engineering Geologists and published by . This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Converging at Cascadia written by and published by . This book was released on 1997 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Rock Mechanics and Engineering written by Milton Kanji and published by Springer Nature. This book was released on 2019-11-24 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.
Download or read book Rock Mechanics for Natural Resources and Infrastructure Development Full Papers written by Sergio A.B. Fontoura and published by CRC Press. This book was released on 2019-09-03 with total page 3791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics for Natural Resources and Infrastructure Development contains the proceedings of the 14th ISRM International Congress (ISRM 2019, Foz do Iguaçu, Brazil, 13-19 September 2019). Starting in 1966 in Lisbon, Portugal, the International Society for Rock Mechanics and Rock Engineering (ISRM) holds its Congress every four years. At this 14th occasion, the Congress brings together researchers, professors, engineers and students around contemporary themes relevant to rock mechanics and rock engineering. Rock Mechanics for Natural Resources and Infrastructure Development contains 7 Keynote Lectures and 449 papers in ten chapters, covering topics ranging from fundamental research in rock mechanics, laboratory and experimental field studies, and petroleum, mining and civil engineering applications. Also included are the prestigious ISRM Award Lectures, the Leopold Muller Award Lecture by professor Peter K. Kaiser. and the Manuel Rocha Award Lecture by Dr. Quinghua Lei. Rock Mechanics for Natural Resources and Infrastructure Development is a must-read for academics, engineers and students involved in rock mechanics and engineering. Proceedings in Earth and geosciences - Volume 6 The ‘Proceedings in Earth and geosciences’ series contains proceedings of peer-reviewed international conferences dealing in earth and geosciences. The main topics covered by the series include: geotechnical engineering, underground construction, mining, rock mechanics, soil mechanics and hydrogeology.
Download or read book Geological Engineering written by Luis Gonzalez de Vallejo and published by CRC Press. This book was released on 2011-07-06 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough knowledge of geology is essential in the design and construction of infrastructures for transport, buildings and mining operations; while an understanding of geology is also crucial for those working in urban, territorial and environmental planning and in the prevention and mitigation of geohazards.Geological Engineering provides an inte
Download or read book Proceedings of the Rocscience International Conference 2023 RIC2023 written by Reginald E. Hammah and published by Springer Nature. This book was released on 2023-12-08 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. Rocscience is delighted to announce the Rocscience International Conference 2023 (RIC2023), an in-person gathering to be held from April 24–26, 2023, in Toronto, Canada. RIC2023's primary objective is to bring geotechnical professionals together to meet and exchange ideas on important issues and developments in geotechnical engineering, particularly combinations of emerging and mature technologies. The geotechnical industry is rapidly evolving. Engineers are more connected through technology, technology is becoming more integrated than ever, and methods combining these technologies are becoming more prevalent. This movement towards combining technologies led us to the conference theme, “Synergy in Geotechnical Engineering – Success Beyond Individual Technologies.” We believe the time is right to highlight how far the industry has come with various technologies and continues to develop. The conference aims to create an environment that fosters new perspectives and helps attendees delve deeper into innovative approaches. During RIC2023, Rocscience will award the 2023 Lifetime Achievement Medal to Dr. Norbert Morgenstern, an internationally recognized authority in the engineering community. As both a practitioner and educator, Dr. Morgenstern’s contributions to the geotechnical community continue to benefit engineers worldwide, and he will give an address on his career. In addition to keynotes by Dr. Morgernstern and four other distinguished speakers, there will be several technical and networking sessions.
Download or read book The Evolution of Geotech 25 Years of Innovation written by Reginald Hammah and published by CRC Press. This book was released on 2021-11-23 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication includes 82 technical papers presented at Rocscience International Conference (RIC) 2021, held online on April 20 and 21, 2021. Rocscience created this event to bring geotechnical academics, researchers and practitioners together to exchange ideas as part of celebrating 25 years of the company’s existence. The papers in these proceedings were from keynotes, panel discussions and papers, selected after careful review of over 100 technical submissions delivered at RIC 2021. The technical papers were grouped into sessions based on their subject areas. The conference aimed to stimulate discussions that could help the industry work towards overcoming geotechnical engineering limitations today. It also sought to foster creative thinking that will advance the current states of the art and practice. The keynote addresses, panel discussions and technical presentations tried to examine geotechnical problems and situations from fresh perspectives. RIC 2021 hopes that the proceedings will continue to enrich our thinking and contribute to achieving a critical mass of change in our practices and approaches. We look forward to significant improvements in our industry.
