Download or read book Characterization of the Electrode SAM electrolyte Interface and Intermolecular Interactions in Solutions Using Electrochemical Impedance Spectroscopy and ATR FTIR Spectroscopy written by Lesia V. Protsailo and published by . This book was released on 2002 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2003 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Immobilized Biocatalysts written by Peter Grunwald and published by MDPI. This book was released on 2018-11-14 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Immobilized Biocatalysts" that was published in Catalysts
Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Photoelectrocatalysis written by Leonardo Palmisano and published by Elsevier. This book was released on 2022-10-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrocatalysis: Fundamentals and Applications presents an in-depth review of the topic for students and researchersworking on photoelectrocatalysis-related subjects from pure chemistry to materials and environmental chemistry inorder to propose applications and new perspectives. The main advantage of a photoelectrocatalytic process is the mildexperimental conditions under which the reactions are carried out, which are often possible at atmospheric pressure androom temperature using cheap and nontoxic solvents (e.g., water), oxidants (e.g., O2 from the air), catalytic materials (e.g.,TiO2 on Ti layer), and the potential exploitation of solar light. This book presents the fundamentals and the applications of photoelectrocatalysis, such as hydrogen production fromwater splitting, the remediation of harmful compounds, and CO2 reduction. Photoelectrocatalytic reactors and lightsources, in addition to kinetic aspects, are presented along with an exploration of the relationship between photocatalysisand electrocatalysis. In addition, photocorrosion issues and the application of selective photoelectrocatalytic organictransformations, which is now a growing field of research, are also reported. Finally, the advantages/disadvantages andfuture perspectives of photoelectrocatalysis are highlighted through the possibility of working at a pilot/industrial scale inenvironmentally friendly conditions. - Presents the fundamentals of photoelectrocatalysis - Outlines photoelectrocatalytic green chemistry - Reviews photoelectrocatalytic remediation of harmful compounds, hydrogen production, and CO2 reduction - Includes photocorrosion, photoelectrocatalytic reactors, and modeling along with kinetic aspects
Download or read book Surface and Thin Film Analysis written by Gernot Friedbacher and published by Wiley-VCH. This book was released on 2011-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveying and comparing all techniques relevant for practical applications in surface and thin film analysis, this second edition of a bestseller is a vital guide to this hot topic in nano- and surface technology. This new book has been revised and updated and is divided into four parts - electron, ion, and photon detection, as well as scanning probe microscopy. New chapters have been added to cover such techniques as SNOM, FIM, atom probe (AP),and sum frequency generation (SFG). Appendices with a summary and comparison of techniques and a list of equipment suppliers make this book a rapid reference for materials scientists, analytical chemists, and those working in the biotechnological industry. From a Review of the First Edition (edited by Bubert and Jenett) "... a useful resource..." (Journal of the American Chemical Society)
Download or read book Graphene written by Wonbong Choi and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 20th century, graphene-a one-atom-thick planar sheet of sp2-bonded carbon atoms densely packed in a honeycomb crystal lattice-has garnered appreciable attention as a potential next-generation electronic material due to its exceptional properties. These properties include high current density, ballistic transport, chemical inertness,
Download or read book Electromagnetic moisture measurement written by Christof Hübner and published by Göttingen University Press. This book was released on 2016 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic moisture measurement technologies have proven to be valuable tools in diverse applications. This monograph covers basic aspects of nondestructive electromagnetic methods of water content determination and relates to the associated highly multidisciplinary field of research and development. It also presents a comprehensive selection of relevant field-tested methods and instruments. The fundamentals of electromagnetic field interactions with dipolar materials are briefly discussed, with special attention towards the dielectric properties of water and aqueous solutions. A tutorial and overview of electromagnetic measurement methods is presented, including dielectric spectroscopy in broad frequency and time domains, as well as dielectric imaging techniques. This review is complemented by a demonstration of successful real-world implementations for the moisture determination of soils, snow, buildings and building materials, food and agricultural goods, as well as various industrial products. The text is completed by a guide concerning the use of reference liquids for the calibration of sensors and instrumentation and by a bibliography of more than 850 references. The monograph is useful as a reference book for researchers and engineers and as a textbook for upper-level students interested in the water content determination of materials.
Download or read book Membrane Hydration written by E. Anibal Disalvo and published by Springer. This book was released on 2015-10-05 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the importance of water in determining the structure, stability and responsive behavior of biological membranes. Water confers to lipid membranes unique features in terms of surface and mechanical properties. The analysis of the hydration forces, plasticiser effects, controlled hydration, formation of microdomains of confined water suggests that water is an active constituent in a water-lipid system. The chapters describe water organization at the lipid membrane–water interphase, the water penetration, the long range water structure in the presence of lipid membranes by means of X-ray and neutron scattering, general polarization, fluorescent probes, ATR-FTIR and near infrared spectroscopies, piezo electric methods, computer simulation and surface thermodynamics. Permeation, percolation, osmotic stress, polarization, protrusion, sorption, hydrophobicity, density fluctuations are treated in detail in self-assembled bilayers. Studies in lipid monolayers show the correlation of surface pressure with water activity and its role in peptide and enzyme interactions. The book concludes with a discussion on anhydrobiosis and the effect of water replacement in microdomains and its consequence for cell function. New definitions of lipid/water interphases consider water not only as a structural-making solvent but as a mediator in signalling metabolic activity, modulating protein insertion and enzymatic activity, triggering oscillatory reactions and functioning of membrane bound receptors. Since these effects occur at the molecular level, membrane hydration appears fundamental to understand the behavior of nano systems and confined environments mimicking biological systems. These insights in structural, thermodynamical and mechanical water properties give a base for new paradigms in membrane structure and function for those interested in biophysics, physical chemistry, biology, bio and nano medicine, biochemistry, biotechnology and nano sciences searching for biotechnological inputs in human health, food industry, plant growing and energy conversion.
Download or read book Electrodes for Li ion Batteries written by Laure Monconduit and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrochemical energy storage is a means to conserve electrical energy in chemical form. This form of storage benefits from the fact that these two energies share the same vector, the electron. This advantage allows us to limit the losses related to the conversion of energy from one form to another. The RS2E focuses its research on rechargeable electrochemical devices (or electrochemical storage) batteries and supercapacitors. The materials used in the electrodes are key components of lithium-ion batteries. Their nature depend battery performance in terms of mass and volume capacity, energy density, power, durability, safety, etc. This book deals with current and future positive and negative electrode materials covering aspects related to research new and better materials for future applications (related to renewable energy storage and transportation in particular), bringing light on the mechanisms of operation, aging and failure.
Download or read book Structure of Electrified Interfaces written by Jacek Lipkowski and published by Wiley-VCH. This book was released on 1993 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume in the Frontiers of Electrochemistry series provides a modern description of the metal-solution interface and describes the advances made in interfacial electrochemistry during the past decade. Contributing authors summarize the impact of new ex situ and in situ techniques in studying electrode surfaces, and illustrate the significance of the development of new experimental techniques and the availability of reliable data in the theory of electrified interfaces. The review articles demonstrate how a molecular picture of the interface has emerged from traditional models that treated the solution as a dielectric and metal as an electronic continuum. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Biomimetic Polymers written by C.G. Gebelein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term biomimetic is comparatively new on the chemical scene, but the concept has been utilized by chemists for many years. Furthermore, the basic idea of making a synthetic material that can imitate the func tions of natural materials probably could be traced back into antiquity. From the dawn of creation, people have probably attempted to duplicate or modify the activities of the natural world. (One can even find allusions to these attempts in the Bible; e. g. , Genesis 30. ) The term "mimetic" means to imitate or mimic. The word "mimic" means to copy closely, or to imitate accurately. Biomimetic, which has not yet entered most dictionaries, means to imitate or mimic some specific bio logical function. Usually, the objective of biomimetics is to form some useful material without the need of utilizing living systems. In a simi lar manner, the term biomimetic polymers means creating synthetic poly mers which imitate the activity of natural bioactive polymers. This is a major advance in polymer chemistry because the natural bioactive polymers are the basis of life itself. Thus, biomimetic polymers imitate the life process in many ways. This present volume delineates some of the recent progress being made in this vast field of biomimetic polymers. Chemists have been making biomimetic polymers for more than fifty years, although this term wasn't used in the early investigations.
Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.
Download or read book Simulating Enzyme Reactivity written by Inaki Tunon and published by Royal Society of Chemistry. This book was released on 2016-11-25 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the theories, methodologies and applications in simulations of enzymatic reactions, this book is a great resource for postgraduate students and researchers.
Download or read book Semiconducting and Metallic Polymers written by Alan J. Heeger and published by OUP Oxford. This book was released on 2010-07-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of conducting and semiconducting (conjugated) polymers make them one of the most attractive areas of interdisciplinary materials science and technology. Written by a pioneer in the field, this book is the first aimed at teaching graduate students, postdoctoral scientists, and specialists in industry about this exciting field.
Download or read book Physics in Food Manufacturing written by Megan Povey and published by . This book was released on 2020-06-12 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first authoritative text on the role that physicists play in solving the inherently multidisciplinary science and technology challenges in food manufacturing. Topics range from designing safe, nutritious and great-tasting foods to the process technology and manufacturing know-how needed to deliver compelling product innovation. The book provides a foundational resource for the transformation of engineering and materials characterisation in the food and pharmaceuticals industries. It is an essential reference for interdisciplinary physical scientists, food/nutrition scientists and engineers working in academic research, government labs and industry, and it is also a valuable resource for R&D staff and product engineers working for suppliers of specialist instrumentation and equipment to the food processing industry. The book is augmented by complementary presentations from the Fourth IOP Physics in Food Manufacturing Conference 2020, held in Leeds, UK. Key Features The first authoritative account of the diverse role that physics and physicists play in the food processing industry. A go-to reference source for anyone wishing to become involved in food processing - science, technology, engineering. Expert accounts by leading academics and industrial scientists.
