Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.
Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.
Download or read book Current Research in Pulsed Laser Deposition written by Liviu Duta and published by MDPI. This book was released on 2021-08-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its limitation in terms of surface covered area, the PLD technique still gathers interest among researchers by offering endless possibilities for tuning thin film composition and enhancing their properties of interest due to: (i) the easiness of a stoichiometric transfer even for very complex target materials, (ii) high adherence of the deposited structures to the substrate, (iii) controlled degree of phase, crystallinity, and thickness of deposited coatings, (iv) versatility of the experimental set-up which allows for simultaneous ablation of multiple targets resulting in combinatorial maps or consecutive ablation of multiple targets producing multi-layered structures, and (v) adjustment of the number of laser pulses, resulting in either a spread of nanoparticles, islands of materials or a complete covering of a surface. Moreover, a variation of PLD, known as Matrix Assisted Pulsed Laser Evaporation, allows for deposition of organic materials, ranging from polymers to proteins and even living cells, otherwise difficult to transfer unaltered in the form of thin films by other techniques. Furthermore, the use of laser light as transfer agent ensures purity of films and pulse-to-pulse deposition allows for an unprecedented control of film thickness at the nm level. This Special Issue is a collection of state-of-the art research papers and reviews in which the topics of interest are devoted to thin film synthesis by PLD and MAPLE, for numerous research and industry field applications, such as bio-active coatings for medical implants and hard, protective coatings for cutting and drilling tools withstanding high friction and elevated temperatures, sensors, solar cells, lithography, magnetic devices, energy-storage and conversion devices, controlled drug delivery and in situ microstructuring for boosting of surface properties.
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. - Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques - Presents key applications, including biomedical, energy, electronic and environmental - Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Design Fabrication and Characterization of Multifunctional Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2021-11-24 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Fabrication, and Characterization of Multifunctional Nanomaterials covers major techniques for the design, synthesis, and development of multifunctional nanomaterials. The chapters highlight the main characterization techniques, including X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, and scanning probe microscopy.The book explores major synthesis methods and functional studies, including: - Brillouin spectroscopy; - Temperature-dependent Raman spectroscopic studies; - Magnetic, ferroelectric, and magneto-electric coupling analysis; - Organ-on-a-chip methods for testing nanomaterials; - Magnetron sputtering techniques; - Pulsed laser deposition techniques; - Positron annihilation spectroscopy to prove defects in nanomaterials; - Electroanalytic techniques. This is an important reference source for materials science students, scientists, and engineers who are looking to increase their understanding of design and fabrication techniques for a range of multifunctional nanomaterials. - Explains the major design and fabrication techniques and processes for a range of multifunctional nanomaterials; - Demonstrates the design and development of magnetic, ferroelectric, multiferroic, and carbon nanomaterials for electronic applications, energy generation, and storage; - Green synthesis techniques and the development of nanofibers and thin films are also emphasized.
Download or read book Zinc Oxide Nanostructures Synthesis and Characterization written by Sotirios Baskoutas and published by MDPI. This book was released on 2018-12-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Zinc Oxide Nanostructures: Synthesis and Characterization" that was published in Materials
Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book Pulsed Laser Induced Nanostructures in Liquids for Energy and Environmental Applications written by Myong Yong Choi and published by Elsevier. This book was released on 2024-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulsed Laser Induced Nanostructures in Liquids for Energy and Environmental Applications covers fundamental insights on the mechanism of pulsed laser techniques by considering various experimental conditions to accelerate hypotheses that are appropriate for the production of efficient nanomaterials. In this book, readers will learn about the major advancements in the field of pulsed laser technologies during the past decades, current applications, and future impacts of pulsed laser technologies. This book provides a comprehensive overview of the development of nanostructured catalytic materials via pulsed laser techniques, their use as energy, environment-related applications and their present trend in the industry and market. It also highlights the latest advances related to the application of these nanostructured materials produced via pulsed laser in liquid techniques in various energy (supercapacitor, batteries, and hydrogen production) and environmental remediation (wastewater treatment and conversion of waste into value-added product) processes. Recent progress on several kinds of both photo and electroactive nanomaterials is reviewed, and essential aspects which govern catalytic behaviors, and the corresponding stability, are discussed. - Provides basic principles of pulsed laser–matter interaction, with a focus on the resulting material responses compared to other conventional techniques and state-of-the-art applications - Offers comprehensive coverage of pulsed laser induced nanomaterials and their potential energy and environmental applications - Examines the properties of pulsed laser induced nanostructures that make them so adaptable
Download or read book VLSI Design and Test written by Brajesh Kumar Kaushik and published by Springer. This book was released on 2017-12-21 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Symposium on VLSI Design and Test, VDAT 2017, held in Roorkee, India, in June/July 2017. The 48 full papers presented together with 27 short papers were carefully reviewed and selected from 246 submissions. The papers were organized in topical sections named: digital design; analog/mixed signal; VLSI testing; devices and technology; VLSI architectures; emerging technologies and memory; system design; low power design and test; RF circuits; architecture and CAD; and design verification.
Download or read book Advanced Environmental Analysis written by Chaudhery Mustansar Hussain and published by Royal Society of Chemistry. This book was released on 2016-11-09 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental analysis techniques have advanced due to the use of nanotechnologies in improving the detection sensitivity and miniaturization of the devices in analytical procedures. These allow for developments such as increases in analyte concentration, the removal of interfering species and improvements in the detection limits. Bridging a gap in the literature, this book uniquely brings together state-of-the-art research in the applications of novel nanomaterials to each of the classical components of environmental analysis, namely sample preparation and extraction, separation and identification by spectroscopic techniques. Special attention is paid to those approaches that are considered greener and reduce the cost of the analysis process both in terms of chemicals and time consumption. Advanced undergraduates, graduates and researchers at the forefront of environmental science and engineering will find this book a good source of information. It will also help regulators, decision makers, surveillance agencies and the organizations assessing the impact of pollutants on the environment.
Download or read book Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications written by Rayees Ahmad Zargar and published by John Wiley & Sons. This book was released on 2023-09-18 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL OXIDE NANOCOMPOSITE THIN FILMS FOR OPTOELECTRONIC DEVICE APPLICATIONS The book provides insight into the fundamental aspects, latest research, synthesis route development, preparation, and future applications of metal oxide nanocomposite thin films. The fabrication of thin film-based materials is important to the future production of safe, efficient, and affordable energy as the devices convert sunlight into electricity. Thin film devices allow excellent interface engineering for high-performance printable solar cells as their structures are highly reliable and stand-alone systems can provide the required megawatts. They have been used as power sources in solar home systems, remote buildings, water pumping, megawatt-scale power plants, satellites, communications, and space vehicles. Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications covers the basics of advanced nanometal oxide-based materials, their synthesis, characterization, and applications, and all the updated information on optoelectronics. Topics discussed include the implications of metal oxide thin films, which are critical for device fabrications. It provides updated information on the economic aspect and toxicity, with great focus paid to display applications, and covers some core areas of nanotechnology, which are particularly concerned with optoelectronics and the available technologies. The book concludes with insights into the role of nanotechnology and the physics behind photovoltaics. Audience The book will be an important volume for electronics and electrical engineers, nanotechnologists, materials scientists, inorganic chemists in academic research, and those in industries, exploring the applications of nanoparticles in semiconductors, power electronics, and more.
Download or read book Proceedings of the 5th International Conference on Metal Material Processes and Manufacturing written by Dong Won Jung and published by Springer Nature. This book was released on 2024 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the proceedings of International Conference on Metal Material Processes and Manufacturing is a comprehensive collection of research papers presented at a conference held on July 29-30, 2023 in Jeju Island, South Korea. The book serves as a valuable resource for academics, researchers, and professionals in the field of metal material processes and manufacturing. The book is organized into several chapters, each covering a different topic related to metal material processes and manufacturing. The chapters include: Fundamentals of Metallurgical Processes, Metallurgical Process Optimization, Metal Matrix Composites, Molten Metal Processing and Modeling. Overall, the proceedings of International Conference on Metal Material Processes and Manufacturing provides a comprehensive overview of the current state of research in the field of metal material processes and manufacturing. It is an essential resource for anyone interested in staying up-to-date with the latest developments in this rapidly evolving field.
Download or read book Pulsed Laser Ablation written by Ion N. Mihailescu and published by CRC Press. This book was released on 2018-01-09 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulsed laser–based techniques for depositing and processing materials are an important area of modern experimental and theoretical scientific research and development, with promising, challenging opportunities in the fields of nanofabrication and nanostructuring. Understanding the interplay between deposition/processing conditions, laser parameters, as well as material properties and dimensionality is demanding for improved fundamental knowledge and novel applications. This book introduces and discusses the basic principles of pulsed laser–matter interaction, with a focus on its peculiarities and perspectives compared to other conventional techniques and state-of-the-art applications. The book starts with an overview of the growth topics, followed by a discussion of laser–matter interaction depending on laser pulse duration, background conditions, materials, and combination of materials and structures. The information outlines the foundation to introduce examples of laser nanostructuring/processing of materials, pointing out the importance of pulsed laser–based technologies in modern (nano)science. With respect to similar texts and monographs, the book offers a comprehensive review including bottom-up and top-down laser-induced processes for nanoparticles and nanomicrostructure generation. Theoretical models are discussed by correlation with advanced experimental protocols in order to account for the fundamentals and underline physical mechanisms of laser–matter interaction. Reputed, internationally recognized experts in the field have contributed to this book. In particular, this book is suitable for a reader (graduate students as well as postgraduates and more generally researchers) new to the subject of pulsed laser ablation in order to gain physical insight into and advanced knowledge of mechanisms and processes involved in any deposition/processing experiment based on pulsed laser–matter interaction. Since knowledge in the field is given step by step comprehensively, this book serves as a valid introduction to the field as well as a foundation for further specific readings.
Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. - Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices - Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures - Provides an in-depth overview of novel applications, including chromogenics, electronics and energy
Download or read book Surface Engineering written by Ashok Kumar and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings from the 2002 TMS Annual Meeting address the scientific issues related to surface engineering phenomenon in synthesis, characterization, and application for all materials. This collection of papers provides a multidisciplinary discussion on surface-related phenomena by which materials performance may be enhanced through engineered interfaces and surface modification technologies. Applied experimental and theoretical aspects that highlight, develop, and utilize approaches to understand and improve surface phenomena are also included. A collection of papers from the 2002 TMS Annual Meeting and Exhibition held in Seattle, Washington, February 17-21, 2002.
Download or read book Metal Oxide Based Thin Film Structures written by Nini Pryds and published by Elsevier. This book was released on 2017-09-07 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Thin Film Structures: Formation, Characterization and Application of Interface-Based Phenomena bridges the gap between thin film deposition and device development by exploring the synthesis, properties and applications of thin film interfaces. Part I deals with theoretical and experimental aspects of epitaxial growth, the structure and morphology of oxide-metal interfaces deposited with different deposition techniques and new developments in growth methods. Part II concerns analysis techniques for the electrical, optical, magnetic and structural properties of thin film interfaces. In Part III, the emphasis is on ionic and electronic transport at the interfaces of Metal-oxide thin films. Part IV discusses methods for tailoring metal oxide thin film interfaces for specific applications, including microelectronics, communication, optical electronics, catalysis, and energy generation and conservation. This book is an essential resource for anyone seeking to further their knowledge of metal oxide thin films and interfaces, including scientists and engineers working on electronic devices and energy systems and those engaged in research into electronic materials. - Introduces the theoretical and experimental aspects of epitaxial growth for the benefit of readers new to the field - Explores state-of-the-art analysis techniques and their application to interface properties in order to give a fuller understanding of the relationship between macroscopic properties and atomic-scale manipulation - Discusses techniques for tailoring thin film interfaces for specific applications, including information, electronics and energy technologies, making this book essential reading for materials scientists and engineers alike
Download or read book Metal Oxide Nanomaterials for Chemical Sensors written by Michael A. Carpenter and published by Springer Science & Business Media. This book was released on 2012-11-09 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art summary and critical analysis of work recently performed in leading research laboratories around the world on the implementation of metal oxide nanomaterial research methodologies for the discovery and optimization of new sensor materials and sensing systems. The book provides a detailed description and analysis of (i) metal oxide nanomaterial sensing principles, (ii) advances in metal oxide nanomaterial synthesis/deposition methods, including colloidal, emulsification, and vapor processing techniques, (iii) analysis of techniques utilized for the development of low temperature metal oxide nanomaterial sensors, thus enabling a broader impact into sensor applications, (iv) advances, challenges and insights gained from the in situ/ex situ analysis of reaction mechanisms, and (v) technical development and integration challenges in the fabrication of sensing arrays and devices.
