Download or read book Characterization of Nanoscale Electronic Materials Using Novel Methods for Scan Probe Microscopy written by Eric M. Seabron and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy of Functional Materials written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2010-12-13 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to provide a general overview of the rapidly developing field of novel scanning probe microscopy (SPM) techniques for characterization of a wide range of functional materials, including complex oxides, biopolymers, and semiconductors. Many recent advances in condensed matter physics and materials science, including transport mechanisms in carbon nanostructures and the role of disorder on high temperature superconductivity, would have been impossible without SPM. The unique aspect of SPM is its potential for imaging functional properties of materials as opposed to structural characterization by electron microscopy. Examples include electrical transport and magnetic, optical, and electromechanical properties. By bringing together critical reviews by leading researchers on the application of SPM to to the nanoscale characterization of functional materials properties, this book provides insight into fundamental and technological advances and future trends in key areas of nanoscience and nanotechnology.
Download or read book Scanning Probe Microscopy written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will be devoted to the technical aspects of electrical and electromechanical SPM probes and SPM imaging on the limits of resolution, thus providing technical introduction into the field. This volume will also address the fundamental physical phenomena underpinning the imaging mechanism of SPMs.
Download or read book Scanning Probe Microscopy Characterization Nanofabrication and Device Application of Functional Materials written by Paula M. Vilarinho and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology.
Download or read book Characterization of Nanostructures written by Sverre Myhra and published by CRC Press. This book was released on 2012-06-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques and methods that can be applied to materials characterization on the microscale are numerous and well-established. Divided into two parts, Characterization of Nanostructures provides thumbnail sketches of the most widely used techniques and methods that apply to nanostructures, and discusses typical applications to single nanoscale objects, as well as to ensembles of such objects. Section I: Techniques and Methods overviews the physical principles of the main techniques and describes those operational modes that are most relevant to nanoscale characterization. It provides sufficient technical detail so that readers and prospective users can gain an appreciation of the strengths and limitations of particular techniques. The section covers both mainstream and less commonly used techniques. Section II: Applications of Techniques to Structures of Different Dimensionalities and Functionalities deals with the methods for materials characterization of generic types of systems, using carefully chosen illustrations from the literature. Each chapter begins with a brief description of the materials and supplies a context for the methods for characterization. The volume concludes with a series of flow charts and brief descriptions of tactical issues. The authors focus on the needs of the research laboratory but also address those of quality control, industrial troubleshooting, and online analysis. Characterization of Nanostructures describes those techniques and their operational modes that are most relevant to nanoscale characterization. It is especially relevant to systems of different dimensionalities and functionalities. The book builds a bridge between generalists, who play vital roles in the post-disciplinary area of nanotechnology, and specialists, who view themselves as more in the context of the discipline.
Download or read book Nanoscale Characterisation of Ferroelectric Materials written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the field of nanoscale characterization of ferroelectric materials using scanning probe microscopy (SPM). It addresses various imaging mechanisms of ferroelectric domains in SPM, quantitative analysis of the piezoresponse signals as well as basic physics of ferroelectrics at the nanoscale level, such as nanoscale switching, scaling effects, and transport behavior. This state-of-the-art review of theory and experiments on nanoscale polarization phenomena will be a useful reference for advanced readers as well for newcomers and graduate students interested in the SPM techniques. The non-specialists will obtain valuable information about different approaches to electrical characterization by SPM, while researchers in the ferroelectric field will be provided with details of SPM-based measurements of ferroelectrics.
Download or read book Nanocharacterization Techniques written by Osvaldo de Oliveira Jr and published by William Andrew. This book was released on 2017-03-18 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocharacterization Techniques covers the main characterization techniques used in nanomaterials and nanostructures. The chapters focus on the fundamental aspects of characterization techniques and their distinctive approaches. Significant advances that have taken place over recent years in refining techniques are covered, and the mathematical foundations needed to use the techniques are also explained in detail. This book is an important reference for materials scientists and engineers looking for a through analysis of nanocharacterization techniques in order to establish which is best for their needs. - Includes a detailed analysis of different nanocharacterization techniques, allowing readers to explore which one is best for their particular needs - Provides examples of how each characterization technique has been used, giving readers a greater understanding of how each technique can be profitably used - Covers the mathematical background needed to utilize each of these techniques to their best effect, meaning that readers can gain a full understanding of the theoretical principles behind each technique covered - Serves as an important, go-to reference for materials scientists and engineers
Download or read book Scanning Microscopy for Nanotechnology written by Weilie Zhou and published by Springer Science & Business Media. This book was released on 2007-03-09 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents scanning electron microscopy (SEM) fundamentals and applications for nanotechnology. It includes integrated fabrication techniques using the SEM, such as e-beam and FIB, and it covers in-situ nanomanipulation of materials. The book is written by international experts from the top nano-research groups that specialize in nanomaterials characterization. The book will appeal to nanomaterials researchers, and to SEM development specialists.
Download or read book Applied Scanning Probe Methods XII written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-10-24 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crack initiation and growth are key issues when it comes to the mechanical reliab- ity of microelectronic devices and microelectromechanical systems (MEMS). Es- cially in organic electronics where exible substrates will play a major role these issues will become of utmost importance. It is therefore necessary to develop me- ods which in situ allow the experimental investigation of surface deformation and fracture processes in thin layers at a micro and nanometer scale. While scanning electron microscopy (SEM) might be used it is also associated with some major experimental drawbacks. First of all if polymers are investigated they usually have to be coated with a metal layer due to their commonly non-conductive nature. Additi- ally they might be damaged by the electron beam of the microscope or the vacuum might cause outgasing of solvents or evaporation of water and thus change material properties. Furthermore, for all kinds of materials a considerable amount of expe- mental effort is necessary to build a tensile testing machine that ts into the chamber. Therefore, a very promising alternative to SEM is based on the use of an atomic force microscope (AFM) to observe in situ surface deformation processes during straining of a specimen. First steps towards this goal were shown in the 1990s in [1–4] but none of these approaches truly was a microtensile test with sample thicknesses in the range of micrometers. To the authors’ knowledge, this was shown for the rst time by Hild et al. in [5]. 16.
Download or read book Scanning Probe Microscopy of Functional Materials written by Sergei V. Kalinin and published by Springer. This book was released on 2010-12-10 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to provide a general overview of the rapidly developing field of novel scanning probe microscopy (SPM) techniques for characterization of a wide range of functional materials, including complex oxides, biopolymers, and semiconductors. Many recent advances in condensed matter physics and materials science, including transport mechanisms in carbon nanostructures and the role of disorder on high temperature superconductivity, would have been impossible without SPM. The unique aspect of SPM is its potential for imaging functional properties of materials as opposed to structural characterization by electron microscopy. Examples include electrical transport and magnetic, optical, and electromechanical properties. By bringing together critical reviews by leading researchers on the application of SPM to to the nanoscale characterization of functional materials properties, this book provides insight into fundamental and technological advances and future trends in key areas of nanoscience and nanotechnology.
Download or read book Progress in Nanoscale Characterization and Manipulation written by Rongming Wang and published by Springer. This book was released on 2018-08-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on charged-particle optics and microscopy, as well as their applications in the materials sciences. Presenting a range of cutting-edge theoretical and methodological advances in electron microscopy and microanalysis, and examining their crucial roles in modern materials research, it offers a unique resource for all researchers who work in ultramicroscopy and/or materials research. The book addresses the growing opportunities in this field and introduces readers to the state of the art in charged-particle microscopy techniques. It showcases recent advances in scanning electron microscopy, transmission electron microscopy and helium ion microscopy, including advanced spectroscopy, spherical-corrected microscopy, focused-ion imaging and in-situ microscopy. Covering these and other essential topics, the book is intended to facilitate the development of microscopy techniques, inspire young researchers, and make a valuable contribution to the field.
Download or read book Scanning Probe Characterization of Novel Semiconductor Materials and Devices written by Xiaotian Zhou and published by . This book was released on 2007 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: As semiconductor devices shrink in size, it becomes more important to characterize and understand electronic properties of the materials and devices at the nanoscale. Scanning probe techniques offers numerous advantages over traditional tools used for semiconductor materials and devices characterization including high spatial resolution, ease of use and multi-functionality for electrical characterization, such as current, potential and capacitance, etc.
Download or read book In situ Materials Characterization written by Alexander Ziegler and published by Springer Science & Business Media. This book was released on 2014-04-01 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of nanoscale materials can change rapidly with time either because the environment changes rapidly or because the influence of the environment propagates quickly across the intrinsically small dimensions of nanoscale materials. Extremely fast time resolution studies using X-rays, electrons and neutrons are of very high interest to many researchers and is a fast-evolving and interesting field for the study of dynamic processes. Therefore, in situ structural characterization and measurements of structure-property relationships covering several decades of length and time scales (from atoms to millimeters and femtoseconds to hours) with high spatial and temporal resolutions are crucially important to understand the synthesis and behavior of multidimensional materials. The techniques described in this book will permit access to the real-time dynamics of materials, surface processes and chemical and biological reactions at various time scales. This book provides an interdisciplinary reference for research using in situ techniques to capture the real-time structural and property responses of materials to surrounding fields using electron, optical and x-ray microscopies (e.g. scanning, transmission and low-energy electron microscopy and scanning probe microscopy) or in the scattering realm with x-ray, neutron and electron diffraction.
Download or read book Handbook of Instrumentation and Techniques for Semiconductor Nanostructure Characterization written by Richard Haight and published by World Scientific. This book was released on 2012 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we delve more deeply into the physics and chemistry of functional materials and processes, we are inexorably driven to the nanoscale. And nowhere is the development of instrumentation and associated techniques more important to scientific progress than in the area of nanoscience. The dramatic expansion of efforts to peer into nanoscale materials and processes has made it critical to capture and summarize the cutting-edge instrumentation and techniques that have become indispensable for scientific investigation in this arena. This Handbook is a key resource developed for scientists, engineers and advanced graduate students in which eminent scientists present the forefront of instrumentation and techniques for the study of structural, optical and electronic properties of semiconductor nanostructures.
Download or read book Handbook of Microscopy for Nanotechnology written by Nan Yao and published by Springer Science & Business Media. This book was released on 2006-07-12 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials take on an enormously rich variety of properties and promise exciting new advances in micromechanical, electronic, and magnetic devices as well as in molecular fabrications. The structure-composition-processing-property relationships for these sub 100 nm-sized materials can only be understood by employing an array of modern microscopy and microanalysis tools. Handbook of Microscopy for Nanotechnology aims to provide an overview of the basics and applications of various microscopy techniques for nanotechnology. This handbook highlights various key microcopic techniques and their applications in this fast-growing field. Topics to be covered include the following: scanning near field optical microscopy, confocal optical microscopy, atomic force microscopy, magnetic force microscopy, scanning turning microscopy, high-resolution scanning electron microscopy, orientational imaging microscopy, high-resolution transmission electron microscopy, scanning transmission electron microscopy, environmental transmission electron microscopy, quantitative electron diffraction, Lorentz microscopy, electron holography, 3-D transmission electron microscopy, high-spatial resolution quantitative microanalysis, electron-energy-loss spectroscopy and spectral imaging, focused ion beam, secondary ion microscopy, and field ion microscopy.
Download or read book Nanoscale Characterization of Semiconductor Materials and Devices Using Scanning Probe Techniques written by Edward T. Yu and published by . This book was released on 1996 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy for Energy Research written by Dawn A. Bonnell and published by World Scientific. This book was released on 2013 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficiency and life time of solar cells, energy and power density of the batteries, and costs of the fuel cells alike cannot be improved unless the complex electronic, optoelectronic, and ionic mechanisms underpinning operation of these materials and devices are understood on the nanometer level of individual defects. Only by probing these phenomena locally can we hope to link materials structure and functionality, thus opening pathway for predictive modeling and synthesis. While structures of these materials are now accessible on length scales from macroscopic to atomic, their functionality has remained Terra Incognitae. In this volume, we provide a summary of recent advances in scanning probe microscopy studies of local functionality of energy materials and devices ranging from photovoltaics to batteries, fuel cells, and energy harvesting systems. Recently emergent SPM modes and combined SPM-electron microscopy approaches are also discussed. Contributions by internationally renowned leaders in the field describe the frontiers in this important field.
