Download or read book Characterization of Mechanical Properties of Thin Films by Scanning Probe Microscopy written by Chung-Jen Lu and published by . This book was released on 1994 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy written by Vijay Nalladega and published by BoD – Books on Demand. This book was released on 2012-04-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning probe microscopy (SPM) is one of the key enabling tools for the advancement for nanotechnology with applications in many interdisciplinary research areas. This book presents selected original research works on the application of scanning probe microscopy techniques for the characterization of physical properties of different materials at the nanoscale. The topics in the book range from surface morphology analysis of thin film structures, oxide thin layers and superconducting structures, novel scanning probe microscopy techniques for characterization of mechanical and electrical properties, evaluation of mechanical and tribological properties of hybrid coatings and thin films. The variety of topics chosen for the book underlines the strong interdisciplinary nature of the research work in the field of scanning probe microscopy.
Download or read book Applied Scanning Probe Methods III written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-04-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ning Tunneling Microscopy sig- led a new era in imaging. The sc- ning probes emerged as a new i- trument for imaging with a pre- sion suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the - gneticForceMicroscope,MFM,and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Applied Scanning Probe Methods IX written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes VIII, IX and X examine the physical and technical foundation for recent progress in applied scanning probe techniques. This is the first book to summarize the state-of-the-art of this technique. The field is progressing so fast that there is a need for a set of volumes every 12 to 18 months to capture latest developments. These volumes constitute a timely and comprehensive overview of SPM applications.
Download or read book Scanning Probe Microscopy in Industrial Applications written by Dalia G. Yablon and published by John Wiley & Sons. This book was released on 2013-10-24 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes new state-of-the-science tools and their contribution to industrial R&D With contributions from leading international experts in the field, this book explains how scanning probe microscopy is used in industry, resulting in improved product formulation, enhanced processes, better quality control and assurance, and new business opportunities. Readers will learn about the use of scanning probe microscopy to support R&D efforts in the semiconductor, chemical, personal care product, biomaterial, pharmaceutical, and food science industries, among others. Scanning Probe Microscopy in Industrial Applications emphasizes nanomechanical characterization using scanning probe microscopy. The first half of the book is dedicated to a general overview of nanomechanical characterization methods, offering a complete practical tutorial for readers who are new to the topic. Several chapters include worked examples of useful calculations such as using Hertz mechanics with and without adhesion to model a contact, step-by-step instructions for simulations to guide cantilever selection for an experiment, and data analysis procedures for dynamic contact experiments. The second half of the book describes applications of nanomechanical characterization in industry, including: New formulation development for pharmaceuticals Measurement of critical dimensions and thin dielectric films in the semiconductor industry Effect of humidity and temperature on biomaterials Characterization of polymer blends to guide product formulation in the chemicals sector Unraveling links between food structure and function in the food industry Contributions are based on the authors' thorough review of the current literature as well as their own firsthand experience applying scanning probe microscopy to solve industrial R&D problems. By explaining the fundamentals before advancing to applications, Scanning Probe Microscopy in Industrial Applications offers a complete treatise that is accessible to both novices and professionals. All readers will discover how to apply scanning probe microscopy to build and enhance their R&D efforts.
Download or read book Applied Scanning Probe Methods XII written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-10-24 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crack initiation and growth are key issues when it comes to the mechanical reliab- ity of microelectronic devices and microelectromechanical systems (MEMS). Es- cially in organic electronics where exible substrates will play a major role these issues will become of utmost importance. It is therefore necessary to develop me- ods which in situ allow the experimental investigation of surface deformation and fracture processes in thin layers at a micro and nanometer scale. While scanning electron microscopy (SEM) might be used it is also associated with some major experimental drawbacks. First of all if polymers are investigated they usually have to be coated with a metal layer due to their commonly non-conductive nature. Additi- ally they might be damaged by the electron beam of the microscope or the vacuum might cause outgasing of solvents or evaporation of water and thus change material properties. Furthermore, for all kinds of materials a considerable amount of expe- mental effort is necessary to build a tensile testing machine that ts into the chamber. Therefore, a very promising alternative to SEM is based on the use of an atomic force microscope (AFM) to observe in situ surface deformation processes during straining of a specimen. First steps towards this goal were shown in the 1990s in [1–4] but none of these approaches truly was a microtensile test with sample thicknesses in the range of micrometers. To the authors’ knowledge, this was shown for the rst time by Hild et al. in [5]. 16.
Download or read book Scanning Probe Microscopy Characterization Nanofabrication and Device Application of Functional Materials written by Paula M. Vilarinho and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology.
Download or read book Applied Scanning Probe Methods XIII written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-10-29 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes XI, XII and XIII examine the physical and technical foundation for recent progress in applied scanning probe techniques. The first volume came out in January 2004, the second to fourth volumes in early 2006 and the fifth to seventh volumes in late 2006. The field is progressing so fast that there is a need for a set of volumes every 12 to 18 months to capture latest developments. These volumes constitute a timely comprehensive overview of SPM applications. After introducing scanning probe microscopy, including sensor technology and tip characterization, chapters on use in various industrial applications are presented. Industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. The chapters have been written by leading researchers and application scientists from all over the world and from various industries to provide a broader perspective.
Download or read book Scanning Probe Microscopy written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will be devoted to the technical aspects of electrical and electromechanical SPM probes and SPM imaging on the limits of resolution, thus providing technical introduction into the field. This volume will also address the fundamental physical phenomena underpinning the imaging mechanism of SPMs.
Download or read book Applied Scanning Probe Methods I written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2014-02-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the physical and technical foundation for recent progress with this technique, Applied Scanning Probe Methods offers a timely and comprehensive overview of SPM applications, now that industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. First it lays the theoretical background of static and dynamic force microscopies, including sensor technology and tip characterization, contributions detail applications such as macro- and nanotribology, polymer surfaces, and roughness investigations. The final part on industrial research addresses special applications of scanning force nanoprobes such as atomic manipulation and surface modification, as well as single electron devices based on SPM.
Download or read book Acoustic Scanning Probe Microscopy written by Francesco Marinello and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.
Download or read book Scanning Probe Microscopy written by Vijay Nalladega and published by IntechOpen. This book was released on 2012-04-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning probe microscopy (SPM) is one of the key enabling tools for the advancement for nanotechnology with applications in many interdisciplinary research areas. This book presents selected original research works on the application of scanning probe microscopy techniques for the characterization of physical properties of different materials at the nanoscale. The topics in the book range from surface morphology analysis of thin film structures, oxide thin layers and superconducting structures, novel scanning probe microscopy techniques for characterization of mechanical and electrical properties, evaluation of mechanical and tribological properties of hybrid coatings and thin films. The variety of topics chosen for the book underlines the strong interdisciplinary nature of the research work in the field of scanning probe microscopy.
Download or read book Applied Scanning Probe Methods XI written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-10-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes XI, XII and XIII examine the physical and technical foundation for recent progress in applied scanning probe techniques. These volumes constitute a timely comprehensive overview of SPM applications. Real industrial applications are included.
Download or read book Optical Characterization of Thin Solid Films written by Olaf Stenzel and published by Springer. This book was released on 2018-03-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an up-to-date survey of the major optical characterization techniques for thin solid films. Emphasis is placed on practicability of the various approaches. Relevant fundamentals are briefly reviewed before demonstrating the application of these techniques to practically relevant research and development topics. The book is written by international top experts, all of whom are involved in industrial research and development projects.
Download or read book Thin Films Stresses and Mechanical Properties written by and published by . This book was released on 1997 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing and Characterization of Protein Polymer Thin Films for Surface Modification of Neural Prosthetic Devices written by Christopher John Buchko and published by . This book was released on 1997 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Roadmap of Scanning Probe Microscopy written by Seizo Morita and published by Springer Science & Business Media. This book was released on 2006-12-30 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning tunneling microscopy has achieved remarkable progress and become the key technology for surface science. This book predicts the future development for all of scanning probe microscopy (SPM). Such forecasts may help to determine the course ultimately taken and may accelerate research and development on nanotechnology and nanoscience, as well as all in SPM-related fields in the future.
