Download or read book Noise in Nanoscale Semiconductor Devices written by Tibor Grasser and published by Springer Nature. This book was released on 2020-04-26 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the state-of-the-art, regarding noise in nanometer semiconductor devices. Readers will benefit from this leading-edge research, aimed at increasing reliability based on physical microscopic models. Authors discuss the most recent developments in the understanding of point defects, e.g. via ab initio calculations or intricate measurements, which have paved the way to more physics-based noise models which are applicable to a wider range of materials and features, e.g. III-V materials, 2D materials, and multi-state defects. Describes the state-of-the-art, regarding noise in nanometer semiconductor devices; Enables readers to design more reliable semiconductor devices; Offers the most up-to-date information on point defects, based on physical microscopic models.

Download or read book Low Frequency Noise in Advanced MOS Devices written by Martin Haartman and published by Springer Science & Business Media. This book was released on 2007-08-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to noise, describing fundamental noise sources and basic circuit analysis, discussing characterization of low-frequency noise and offering practical advice that bridges concepts of noise theory and modelling, characterization, CMOS technology and circuits. The text offers the latest research, reviewing the most recent publications and conference presentations. The book concludes with an introduction to noise in analog/RF circuits and describes how low-frequency noise can affect these circuits.

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Frontiers In Electronics Future Chips Proceedings Of The 2002 Workshop On Frontiers In Electronics Wofe 02 written by Yoon Soo Park and published by World Scientific. This book was released on 2003-01-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2002 Workshop on Frontiers in Electronics was the third in the series of WOFE workshops. Over 70 leading experts from academia, industry, and government agencies reported on the most recent developments in their fields and exchanged views on future trends and directions of the electronics and photonics industry. The issues they addressed ranged from system-on-chip to DNA doping, from ultrathin SOI to electrotextiles, from photonics integration on the ULSI platform to wide band gap semiconductor devices and solid state lighting. The rapid pace of electronic technology evolution compels a merger of different technical areas, and WOFE-02 provided a unique opportunity for cross-fertilization of the emerging fields of microelectronics, photonics, and nanoelectronics. The workshop was informal and stimulated provocative views, visionary outlooks, and discussions on controversial issues.

Download or read book CMOS RF Modeling Characterization and Applications written by M. Jamal Deen and published by World Scientific. This book was released on 2002 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicon Analog Components written by Badih El-Kareh and published by Springer. This book was released on 2019-08-07 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers modern analog components, their characteristics, and interactions with process parameters. It serves as a comprehensive guide, addressing both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions. Based on the authors’ extensive experience in the development of analog devices, this book is intended for engineers and scientists in semiconductor research, development and manufacturing. The problems at the end of each chapter and the numerous charts, figures and tables also make it appropriate for use as a text in graduate and advanced undergraduate courses in electrical engineering and materials science. Enables engineers to understand analog device physics, and discusses important relations between process integration, device design, component characteristics, and reliability; Describes in step-by-step fashion the components that are used in analog designs, the particular characteristics of analog components, while comparing them to digital applications; Explains the second-order effects in analog devices, and trade-offs between these effects when designing components and developing an integrated process for their manufacturing.

Download or read book Miniaturized Transistors written by Lado Filipovic and published by MDPI. This book was released on 2019-06-24 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is the future of CMOS? Sustaining increased transistor densities along the path of Moore's Law has become increasingly challenging with limited power budgets, interconnect bandwidths, and fabrication capabilities. In the last decade alone, transistors have undergone significant design makeovers; from planar transistors of ten years ago, technological advancements have accelerated to today's FinFETs, which hardly resemble their bulky ancestors. FinFETs could potentially take us to the 5-nm node, but what comes after it? From gate-all-around devices to single electron transistors and two-dimensional semiconductors, a torrent of research is being carried out in order to design the next transistor generation, engineer the optimal materials, improve the fabrication technology, and properly model future devices. We invite insight from investigators and scientists in the field to showcase their work in this Special Issue with research papers, short communications, and review articles that focus on trends in micro- and nanotechnology from fundamental research to applications.

Download or read book Advances in Noise Analysis Mitigation and Control written by Noor Ahmed and published by BoD – Books on Demand. This book was released on 2016-10-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The adverse impacts from excess noise on human health and daily activities have accelerated at an alarming rate over the last few decades. This has prompted significant research into noise attenuation and mitigation of these unwanted effects. This book is a collection of works from eminent researchers from around the world, who address the aforementioned issues. It provides the most up-to-date information on current work being conducted in the field of noise pollution and is of value to a wide range of students, engineers, scientists and industry consultants who wish to further understand current methodologies and emerging concepts.

Download or read book Ultra Low Noise CMOS Image Sensors written by Assim Boukhayma and published by Springer. This book was released on 2017-11-28 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis provides a thorough noise analysis for conventional CIS readout chains, while also presenting and discussing a variety of noise reduction techniques that allow the read noise in standard processes to be optimized. Two physical implementations featuring sub-0.5-electron RMS are subsequently presented to verify the proposed noise reduction techniques and provide a full characterization of a VGA imager. Based on the verified noise calculation, the impact of the technology downscaling on the input-referred noise is also studied. Further, the thesis covers THz CMOS image sensors and presents an original design that achieves ultra-low-noise performance. Last but not least, it provides a comprehensive review of CMOS image sensors.

Download or read book Tradeoffs and Optimization in Analog CMOS Design written by David Binkley and published by John Wiley & Sons. This book was released on 2008-09-15 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog CMOS integrated circuits are in widespread use for communications, entertainment, multimedia, biomedical, and many other applications that interface with the physical world. Although analog CMOS design is greatly complicated by the design choices of drain current, channel width, and channel length present for every MOS device in a circuit, these design choices afford significant opportunities for optimizing circuit performance. This book addresses tradeoffs and optimization of device and circuit performance for selections of the drain current, inversion coefficient, and channel length, where channel width is implicitly considered. The inversion coefficient is used as a technology independent measure of MOS inversion that permits design freely in weak, moderate, and strong inversion. This book details the significant performance tradeoffs available in analog CMOS design and guides the designer towards optimum design by describing: An interpretation of MOS modeling for the analog designer, motivated by the EKV MOS model, using tabulated hand expressions and figures that give performance and tradeoffs for the design choices of drain current, inversion coefficient, and channel length; performance includes effective gate-source bias and drain-source saturation voltages, transconductance efficiency, transconductance distortion, normalized drain-source conductance, capacitances, gain and bandwidth measures, thermal and flicker noise, mismatch, and gate and drain leakage current Measured data that validates the inclusion of important small-geometry effects like velocity saturation, vertical-field mobility reduction, drain-induced barrier lowering, and inversion-level increases in gate-referred, flicker noise voltage In-depth treatment of moderate inversion, which offers low bias compliance voltages, high transconductance efficiency, and good immunity to velocity saturation effects for circuits designed in modern, low-voltage processes Fabricated design examples that include operational transconductance amplifiers optimized for various tradeoffs in DC and AC performance, and micropower, low-noise preamplifiers optimized for minimum thermal and flicker noise A design spreadsheet, available at the book web site, that facilitates rapid, optimum design of MOS devices and circuits Tradeoffs and Optimization in Analog CMOS Design is the first book dedicated to this important topic. It will help practicing analog circuit designers and advanced students of electrical engineering build design intuition, rapidly optimize circuit performance during initial design, and minimize trial-and-error circuit simulations.

Download or read book Gan based Materials And Devices Growth Fabrication Characterization And Performance written by Robert F Davis and published by World Scientific. This book was released on 2004-05-07 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique materials properties of GaN-based semiconductors have stimulated a great deal of interest in research and development regarding nitride materials growth and optoelectronic and nitride-based electronic devices. High electron mobility and saturation velocity, high sheet carrier concentration at heterojunction interfaces, high breakdown field, and low thermal impedance of GaN-based films grown over SiC or bulk AlN substrates make nitride-based electronic devices very promising. The chemical inertness of nitrides is another key property.This volume, written by experts on different aspects of nitride technology, addresses the entire spectrum of issues related to nitride materials and devices, and it will be useful for technologists, scientists, engineers, and graduate students who are working on wide bandgap materials and devices. The book can also be used as a supplementary text for graduate courses on wide bandgap semiconductor technology.

Download or read book MOSFET Modeling for Circuit Analysis and Design written by Carlos Galup-Montoro and published by World Scientific. This book was released on 2007 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the next generation of MOSFET models. Addressed to circuit designers with an in-depth treatment that appeals to device specialists, the book presents a fresh view of compact modeling, having completely abandoned the regional modeling approach.Both an overview of the basic physics theory required to build compact MOSFET models and a unified treatment of inversion-charge and surface-potential models are provided. The needs of digital, analog and RF designers as regards the availability of simple equations for circuit designs are taken into account. Compact expressions for hand analysis or for automatic synthesis, valid in all operating regions, are presented throughout the book. All the main expressions for computer simulation used in the new generation compact models are derived.Since designers in advanced technologies are increasingly concerned with fluctuations, the modeling of fluctuations is strongly emphasized. A unified approach for both space (matching) and time (noise) fluctuations is introduced.

Download or read book Springer Handbook of Electronic and Photonic Materials written by Safa Kasap and published by Springer. This book was released on 2017-10-04 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 2006 with total page 1912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1969 with total page 1960 pages. Available in PDF, EPUB and Kindle. Book excerpt: