Download or read book Characterization of Impact Damage and Fiber Reinforced Polymer Repair Systems for Metallic Utility Poles written by Cara I. Johnson and published by . This book was released on 2013 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Previous studies have demonstrated that the behavior of fiber reinforced polymers (FRPs) bonded to metallic utility poles are governed by the following failure modes; yielding of the metallic substrate, FRP tensile rupture, FRP compressive buckling, and debonding of FRP from the substrate. Therefore, an in situ method can be devised for the repair of utility poles, light poles, and mast arms that returns the poles to their original service strength. This thesis investigates the effect of damage due to vehicular impact on metallic poles, and the effectiveness of externally-bonded FRP repair systems in restoring their capacity. Damage is simulated experimentally by rapid, localized load application to pole sections, creating dents ranging in depth from 5 to 45% of the outer diameter. Four FRP composite repair systems were selected for characterization and investigation due to their mechanical properties, ability to balance the system failure modes, and installation effectiveness. Bending tests are conducted on dented utility poles, both unrepaired and repaired. Nonlinear finite element models of dented and repaired pole bending behavior are developed in MSC. Marc. These models show good agreement with experimental results, and can be used to predict behavior of full-scale repair system. A relationship between dent depth and reduced pole capacity is developed, and FRP repair system recommendations are presented.
Download or read book Failure Analysis of Impact damaged Metallic Poles Repaired with Fiber Reinforced Polymer Composites written by Robert Arthur Slade and published by . This book was released on 2012 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic utility poles, light poles, and mast arms are intermittently damaged by vehicle collision. In many cases the vehicular impact does not cause immediate failure of the structure, but induces localized damage that may result in failure under extreme service loadings or can promote degradation and corrosion within the damaged region. Replacement of these poles is costly and often involves prolonged lane closures, service interruption, and temporary loss of functionality. Therefore, an in situ repair of these structures is required. This thesis examines the failure modes of damaged metallic poles reinforced with externally-bonded fiber reinforced polymer (FRP) composites. Several FRP repair systems were selected for comparison, and a set of medium and full-scale tests were conducted to identify the critical failure modes. The material properties of each component of the repair were experimentally determined, and then combined into a numerical model capable of predicting global response. Four possible failure modes are discussed: yielding of the unreinforced substrate, tensile rupture of the FRP, compressive buckling of the FRP, and debonding of the FRP from the substrate. It was found that simple linear, bilinear, and trilinear stress-strain relationships accurately describe the response of the composite and substrate components, whereas a more complex bond-slip relationship is required to characterize debonding. These constitutive properties were then incorporated into MSC. Marc, a versatile nonlinear finite element program. The output of the FEM analysis showed good agreement with the results of the experimental bond-slip tests.
Download or read book Cities and Their Vital Systems written by Advisory Committee on Technology and Society and published by National Academies Press. This book was released on 1989 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cities and Their Vital Systems asks basic questions about the longevity, utility, and nature of urban infrastructures; analyzes how they grow, interact, and change; and asks how, when, and at what cost they should be replaced. Among the topics discussed are problems arising from increasing air travel and airport congestion; the adequacy of water supplies and waste treatment; the impact of new technologies on construction; urban real estate values; and the field of "telematics," the combination of computers and telecommunications that makes money machines and national newspapers possible.
Download or read book Composites Industry Abstracts written by and published by . This book was released on 1996 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1989 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. State of the art analysis of impact response, damage tolerance and failure of FRC materials Distinguished contributors provide expert analysis of the most recent materials and structures Valuable tool for R&D engineers, materials scientists and designers
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book NASA SP written by and published by . This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1993-04 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Electric Power Distribution Equipment and Systems written by Thomas Allen Short and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power distribution and quality remain the key challenges facing the electric utilities industry. Choosing the right equipment and architecture for a given application means the difference between success and failure. Comprising chapters carefully selected from the best-selling Electric Power Distribution Handbook, Electric Power Distribution Equipment and Systems provides an economical, sharply focused reference on the technologies and infrastructures that enable reliable, efficient distribution of power, from traversing vast distances to local power delivery. The book works inward from broad coverage of overall power systems all the way down to specific equipment application. It begins by laying a foundation in the fundamentals of distribution systems, explaining configurations, substations, loads, and differences between European and US systems. It also includes a look at the development of the field as well as future problems and challenges to overcome. Building on this groundwork, the author elaborates on both overhead and underground distribution networks, including the underlying concepts and practical issues associated with each. Probing deeper into the system, individual chapters explore transformers, voltage regulation, and capacitor application in detail, from basic principles to operational considerations. With clear explanations and detailed information, Electric Power Distribution Equipment and Systems gathers critical concepts, technologies, and applications into a single source that is ideally suited for immediate implementation.
Download or read book Hurricane Risk written by Jennifer M. Collins and published by Springer. This book was released on 2019-02-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the outcomes of new research focusing on climate risk related to hurricanes. Topics include numerical simulation of tropical cyclones, through tropical cyclone hazard estimation to damage estimates and their implications for commercial risk. Inspired by the 6th International Summit on Hurricanes and Climate Change: From Hazard to Impact, this book brings together leading international academics and researchers, and provides a source reference for both risk managers and climate scientists for research on the interface between tropical cyclones, climate and risk.
Download or read book Failure Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques. Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete. With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. Provides a review of concrete deterioration and damage Discusses condition assessment and repair techniques, standards and guidelines
Download or read book Marine Applications of Advanced Fibre reinforced Composites written by Jasper Graham-Jones and published by Woodhead Publishing. This book was released on 2015-09-28 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The marine environment presents significant challenges for materials due to the potential for corrosion by salt water, extreme pressures when deeply submerged and high stresses arising from variable weather. Well-designed fibre-reinforced composites can perform effectively in the marine environment and are lightweight alternatives to metal components and more durable than wood. Marine Applications of Advanced Fibre-Reinforced Composites examines the technology, application and environmental considerations in choosing a fibre-reinforced composite system for use in marine structures. This book is divided into two parts. The chapters in Part One explore the manufacture, mechanical behavior and structural performance of marine composites, and also look at the testing of these composites and end of life environmental considerations. The chapters in Part Two then investigate the applications of marine composites, specifically for renewable energy devices, offshore oil and gas applications, rigging and sails. Underwater repair of marine composites is also reviewed. Comprehensively examines all aspects of fibre-reinforced marine composites, including the latest advances in design, manufacturing methods and performance Assesses the environmental impacts of using fibre-reinforced composites in marine environments, including end of life considerations Reviews advanced fibre-reinforced composites for renewable energy devices, rigging, sail textiles, sail shape optimisation and offshore oil and gas applications
