Download or read book Characterization of High Speed Friction Stir Weld Between Dissimilar Aluminum Alloys written by Jingyi Zhang and published by . This book was released on 2017 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir welding (FSW) is a solid-state joining technique that is proven to produce superior joint properties and is particularly helpful in the joining of high-strength aluminum alloys. The historically slower welding speed of FSW (in the range of hundreds of millimeters per minute), among other issues associated with the application of the technique has limited its industrial use to small volume productions. Revolutionary high-speed FSW of aluminum blanks has been developed at Pacific Northwest National Laboratory and satisfactory forming properties were achieved. This work focuses on the characterization of the complex microstructures formed in high-speed FSW butt joints and the correlation between the microstructural features and the mechanical properties of the welds. The effect of increased welding speed was first studied on similar aluminum joints. Materials properties investigated including the tensile strength, fracture toughness, elongation, joint efficiency, microhardness, and corrosion susceptibility. The evolution of the materials properties is found to be related to the welding parameters through the complex physical metallurgy events including materials softening, material mixing and transportation, precipitate reaction, dynamic recrystallization, dynamic recovery, and severe plastic deformation during the friction stir welding process. The formation mechanism was then studied in the joining of dissimilar aluminum alloys AA5182-O and AA6022-T4 with different thicknesses. Local textural analysis and particle analysis aided in the understanding of the material flow patterns and helped in the selection of a fixed location of dissimilar alloys to achieve defect-free joints. The microstructural characterization and analysis methods include transmission electron microscopy, electron diffraction, scanning electron microscopy, optical microscopy, energy-dispersive X-ray spectroscopy, electron backscatter and probability density functions.
Download or read book Friction Stir Welding written by Noor Zaman Khan and published by CRC Press. This book was released on 2017-07-28 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of mechanical properties and its characterization is important to the weld quality whose further analysis requires mechanical property and microstructure correlation. Present book addresses the basic understanding of the Friction Stir Welding (FSW) process that includes effect of various process parameters on the quality of welded joints. It discusses about various problems related to the welding of dissimilar aluminium alloys including influence of FSW process parameters on the microstructure and mechanical properties of such alloys. As a case study, effect of important process parameters on joint quality of dissimilar aluminium alloys is included.
Download or read book Friction Stir Welding and Processing X written by Yuri Hovanski and published by Springer. This book was released on 2019-02-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of the recent progress on friction stir technologies including high-temperature applications, industrial applications, dissimilar alloy/materials, lightweight alloys, simulation, control, characterization, and derivative technologies. The volume offers a current look at friction stir welding technology from application to characterization and from modeling to R&D. Contributions document advances in application, controls, and simulation of the friction stir process to aid researchers in seeing the current state-of-the-art.
Download or read book Friction Stir Welding and Processing IX written by Yuri Hovanski and published by Springer. This book was released on 2017-02-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books presents a current look at friction stir welding technology from application to characterization and from modeling to R&D. It is a compilation of the recent progress relating to friction stir technologies including derivative technologies, high-temperature applications, industrial applications, dissimilar alloy/materials, lightweight alloys, simulation, and characterization. With contributions from leaders and experts in industry and academia, this will be a comprehensive source for the field of Friction Stir Welding and Processing.
Download or read book Friction Stir Welding and Processing written by Rajiv S. Mishra and published by ASM International. This book was released on 2007-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.
Download or read book Friction Stir Welding written by Daniela Lohwasser and published by Elsevier. This book was released on 2009-12-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir welding (FSW) is a highly important and recently developed joining technology that produces a solid phase bond. It uses a rotating tool to generate frictional heat that causes material of the components to be welded to soften without reaching the melting point and allows the tool to move along the weld line. Plasticized material is transferred from the leading edge to trailing edge of the tool probe, leaving a solid phase bond between the two parts. Friction stir welding: from basics to applications reviews the fundamentals of the process and how it is used in industrial applications.Part one discusses general issues with chapters on topics such as basic process overview, material deformation and joint formation in friction stir welding, inspection and quality control and friction stir welding equipment requirements and machinery descriptions as well as industrial applications of friction stir welding. A chapter giving an outlook on the future of friction stir welding is included in Part one. Part two reviews the variables in friction stir welding including residual stresses in friction stir welding, effects and defects of friction stir welds, modelling thermal properties in friction stir welding and metallurgy and weld performance.With its distinguished editors and international team of contributors, Friction stir welding: from basics to applications is a standard reference for mechanical, welding and materials engineers in the aerospace, automotive, railway, shipbuilding, nuclear and other metal fabrication industries, particularly those that use aluminium alloys. - Provides essential information on topics such as basic process overview, materials deformation and joint formation in friction stir welding - Inspection and quality control and friction stir welding equipment requirements are discussed as well as industrial applications of friction stir welding - Reviews the variables involved in friction stir welding including residual stresses, effects and defects of friction stir welds, modelling thermal properties, metallurgy and weld performance
Download or read book Friction Stir Welding of High Strength 7XXX Aluminum Alloys written by Rajiv S. Mishra and published by Butterworth-Heinemann. This book was released on 2016-06-08 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction Stir Welding of High Strength 7XXX Aluminum Alloys is the latest edition in the Friction Stir series and summarizes the research and application of friction stir welding to high strength 7XXX series alloys, exploring the past and current developments in the field. Friction stir welding has demonstrated significant benefits in terms of its potential to reduce cost and increase manufacturing efficiency of industrial products in transportation, particularly the aerospace sector. The 7XXX series aluminum alloys are the premium aluminum alloys used in aerospace. These alloys are typically not weldable by fusion techniques and considerable effort has been expended to develop friction stir welding parameters. Research in this area has shown significant benefit in terms of joint efficiency and fatigue performance as a result of friction stir welding. The book summarizes those results and includes discussion of the potential future directions for further optimization. - Offers comprehensive coverage of friction stir welding of 7XXX series alloys - Discusses the physical metallurgy of the alloys - Includes physical metallurgy based guidelines for obtaining high joint efficiency - Summarizes the research and application of friction stir welding to high strength 7XXX series alloys, exploring the past and current developments in the field
Download or read book Friction Stir Welding of Dissimilar Alloys and Materials written by Nilesh Kulkarni and published by Butterworth-Heinemann. This book was released on 2015-03-05 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will summarize research work carried out so far on dissimilar metallic material welding using friction stir welding (FSW). Joining of dissimilar alloys and materials are needed in many engineering systems and is considered quite challenging. Research in this area has shown significant benefit in terms of ease of processing, material mixing, and superior mechanical properties such as joint efficiencies. A summary of these results will be discussed along with potential guidelines for designers. - Explains solid phase process and distortion of work piece - Addresses dimensional stability and repeatability - Addresses joint strength - Covers metallurgical properties in the joint area - Covers fine microstructure - Introduces improved materials use (e.g., joining different thicknesses) - Covers decreased fuel consumption in light weight aircraft - Addresses automotive and ship applications
Download or read book Friction Stir Welding of 2XXX Aluminum Alloys including Al Li Alloys written by Rajiv S. Mishra and published by Butterworth-Heinemann. This book was released on 2016-10-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction Stir Processing of 2XXX Aluminum Alloys including Al-Li Alloys is the latest edition in the Friction Stir Welding and Processing series and examines the application of friction stir welding to high strength 2XXX series alloys, exploring the past and current developments in the field. The book features recent research showing significant benefit in terms of joint efficiency and fatigue performance as a result of friction stir welding. Friction stir welding has demonstrated significant benefits in terms of its potential to reduce cost and increase manufacturing efficiency of industrial products including transportation, particularly the aerospace sector. The 2XXX series aluminum alloys are the premium aluminum alloys used in aerospace. The book includes discussion of the potential future directions for further optimization, and is designed for both practicing engineers and materials scientists, as well as researchers in the field. - Provides comprehensive coverage of friction stir welding of 2XXX series alloys - Discusses the physical metallurgy of the alloys - Includes physical metallurgy-based guidelines for obtaining high joint efficiency - Features illustrated examples of the application of FSW in the aerospace industry
Download or read book Friction Stir Welding and Processing XI written by Yuri Hovanski and published by Springer Nature. This book was released on 2021-02-16 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents fundamentals and the current status of friction stir welding (FSW) and solid-state friction stir processing of materials, and provides researchers and engineers with an opportunity to review the current status of the friction stir related processes and discuss the future possibilities. Contributions cover various aspects of friction stir welding and processing including their derivative technologies. Topics include but are not limited to: • derivative technologies • high-temperature lightweight applications • industrial applications • dissimilar alloys and/or materials • controls and nondestructive examination • simulation • characterization
Download or read book Advanced Joining Processes written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2020-03-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. - Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials - Considers heat generation, heat flow and material flow - Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Parametric Study on High Speed Friction Stir Welding of Dissimilar Aluminum Alloys written by Gangadhar Bhat Kalyanpur and published by . This book was released on 2005 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: [Author's abstract] Friction Stir Welding (FSW) is a new welding technique, invented by The Welding Institute, UK, in 1992. FSW is a solid state welding which includes extruding and forging of the metal by the tool and the material is welded without using the filler material. The technique is being successfully used to join low temperature metals, especially aluminum and its alloys. Increase in the use of Aluminum in automotive, aerospace and other related industries has renewed the interests of weld ability of dissimilar aluminum alloys. At present FSW is widely used to join similar metals. For dissimilar metals, there has been very little research work which has focused on studying the effect of welding parameters on mechanical properties of the welds. In this thesis, aluminum alloys A16061-T6 was welded with Al 7075-0 Bare, A16061-T6 was welded with A12024-T3 and A12024-T3 was welded with Al 7075- 0 Bare and weld parameters, rotational speed and transverse speed of the tool are correlated with the hardness and tensile strength of the welds. The experiment was run according to the design considered using Stat-Ease software and was carried out at high speeds ranging from 12000 rpm to 15000 rpm and transverse speed of 3 inches/min to 7 inches/min. Interactions between the weld parameters and their contribution towards the hardness property of the weld were studied. It was observed that at lower transverse speed i.e. at 3 inches/min the hardness values were higher than at 7 inches/min. It was observed that the hardness value of A17075-0 was increased by 40% due to the grain refinement. The tensile test results showed that the yield strength with respect to A16061-T6 was 75% and with respect to A12024-T3 was 60%.
Download or read book Residual Stresses in Friction Stir Welding written by Nilesh Kulkarni and published by Butterworth-Heinemann. This book was released on 2013-11-20 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of residual stresses in friction stir welding and reviews the data reported for various materials. Residual stresses produced during manufacturing processes lead to distortion of structures. It is critical to understand and mitigate residual stresses. From the onset of friction stir welding, claims have been made about the lower magnitude of residual stresses. The lower residual stresses are partly due to lower peak temperature and shorter time at temperature during friction stir welding. A review of residual stresses that result from the friction stir process and strategies to mitigate it have been presented. Friction stir welding can be combined with additional in-situ and ex-situ manufacturing steps to lower the final residual stresses. Modeling of residual stresses highlights the relationship between clamping constraint and development of distortion. For many applications, management of residual stresses can be critical for qualification of component/structure. - Reviews magnitude of residual stresses in various metals and alloys - Discusses mitigation strategies for residual stresses during friction stir welding - Covers fundamental origin of residual stresses and distortion
Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials II written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2007-07-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer-reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.
Download or read book Friction Stir Welding and Processing XII written by Yuri Hovanski and published by Springer Nature. This book was released on 2023-02-11 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents fundamentals and the current status of friction stir welding (FSW) and solid-state friction stir processing of materials and provides researchers and engineers with an opportunity to review the current status of the friction stir related processes and discuss the future possibilities. Contributions cover various aspects of friction stir welding and processing including their derivative technologies. Topics include, but are not limited to: • Derivative technologies • High-temperature applications • Industrial applications • Dissimilar alloys and/or materials • Lightweight alloys • Simulation • Characterization • Non-destructive examination techniques
Download or read book Friction Stir Welding of Aluminium Alloys written by Moataz Attallah and published by LAP Lambert Academic Publishing. This book was released on 2011-02 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction Stir Welding (FSW) is known to result in a complex microstructural development, with features that remain unexplained, such as: the formation of the onion rings structure. Moreover, various microstructural factors have been suggested to control the strength in Al-Mg AA5xxx welds, without identifying their relative contribution. Furthermore, the influence of the basemetal microstructural parameters (e.g. grains, intermetallic particles, stored energy) on the microstructure-property development has not been previously investigated. These issues are addressed in the present study.
