Download or read book Characterization of Fiber Finish Performance with Respect to Frictional and Static Forces written by Kay McMahan McCoy and published by . This book was released on 1986 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Download or read book Handbook of Lubrication and Tribology written by George E. Totten and published by CRC Press. This book was released on 2006-04-06 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it was first published some two decades ago, the original Handbook of Lubrication and Tribology stood on technology's cutting-edge as the first comprehensive reference to assist the emerging science of tribology lubrication. Later, followed by Volume II, Theory and Design and Volume III, Monitoring, Materials, Synthetic Lubricants, and Ap
Download or read book Proceedings written by and published by . This book was released on 1995 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Friction in Textile Materials written by B S Gupta and published by Elsevier. This book was released on 2008-06-02 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction is a major issue in both the production of textiles and in the finished product. This authoritative book reviews how friction occurs and the ways it can be measured and controlled.The book begins by looking at how friction can be defined and how the structure and properties of textile fibres lead to friction behaviour. It also discusses slip-stick phenomena in textiles and ways of measuring friction in yarns and fabric. The second part of the book reviews friction in particular textiles, including cotton, wool and synthetic fibres as well as woven fabrics. These and other chapters also discuss ways of controlling friction, including fabric finishes and lubricants.With its distinguished editor and contributions from some of the world’s leading authorities in the subject, Friction in textile materials is a standard reference for the textile industry and those researching this important topic. An authoritative review of friction, its management and control
Download or read book Reinforced Polymer Composites written by Pramendra K. Bajpai and published by John Wiley & Sons. This book was released on 2019-08-13 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art processing techniques and readily applicable knowledge on processing of polymer composites The book presents the advancement in the field of reinforced polymer composites with emphasis on manufacturing techniques, including processing of different reinforced polymer composites, secondary processing of green composites, and post life cycle processing. It discusses the advantages and limitations of each processing method and the effect of processing parameters on the overall performance of the composites. Characterization and applications of reinforced polymer composites are also introduced. Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment starts off by providing readers with a comprehensive overview of the field. It then introduces them to the fabrication of both short fiber/filler reinforced polymer composites and laminated reinforced polymer composites. Next, it takes them through the processing of polymer-based nanocomposites; the many advances in curing methods of reinforced polymer composites; and post life cycle processing, re-processing, and disposal mechanisms of reinforced polymer composites. Numerous other chapters cover: synthetic versus natural fiber reinforced plastics; characterization techniques of reinforced plastics; friction and wear analysis of reinforced plastics; secondary processing of reinforced plastics; and applications of reinforced plastics. -Presents the latest development in materials, processing, and characterization techniques, as well as applications of reinforced polymer composites -Guides users in choosing the best processing methods to produce polymer composites and successfully manufacture high quality products -Assists academics in sorting out basic research questions and helps those in industry manufacture products, such as marine, automotive, aerospace, and sport goods Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment is an important book for materials scientists, polymer chemists, chemical engineers, process engineers, and anyone involved in the chemical or plastics technology industry.
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book The International Dyer Textile Printer Bleacher and Finisher written by and published by . This book was released on 1969 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes supplement for 1977- called: International dyer export.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Interfaces in Fiber Reinforced Composites written by Jang-Kyo Kim and published by Elsevier. This book was released on 1998-10-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces. The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
Download or read book Melliand International written by and published by . This book was released on 2006 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1978 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Behavior of Materials Volume 1 written by Bo Song and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: General Dynamic Material Properties Novel Dynamic Testing Techniques Dynamic Fracture and Failure Novel Testing Techniques Dynamic Behavior of Geo-materials Dynamic Behavior of Biological and Biomimetic Materials Dynamic Behavior of Composites and Multifunctional Materials Dynamic Behavior of Low-Impedance materials Multi-scale Modeling of Dynamic Behavior of Materials Quantitative Visualization of Dynamic Behavior of Materials Shock/Blast Loading of Materials
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hair and Hair Care written by Dale H. Johnson and published by Routledge. This book was released on 2018-12-19 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the chemical and physical properties, care and treatment of hair, including product development. The book discusses ethnic hair, its appropriate management measures and products; emphasizes manufacturing and sales strategies for domestic and international product viability; surveys instrumental methods for product performance evaluation; presents sensory and market research techniques for optimum consumer satisfaction; and more.
Download or read book XXVII Brazilian Congress on Biomedical Engineering written by Teodiano Freire Bastos-Filho and published by Springer Nature. This book was released on 2022-04-14 with total page 2274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research and developments in the field of Biomedical Engineering. It describes both fundamental and clinically-oriented findings, highlighting advantages and challenges of innovative methods and technologies, such as artificial intelligence, wearable devices and neuroengineering, important issues related to health technology management and human factors in health, and new findings in biomechanical analysis and modeling. Gathering the proceedings of the XXVII Brazilian Congress on Biomedical Engineering, CBEB 2020, held on October 26-30, 2020, in Vitória, Brazil, and promoted by the Brazilian Society of Biomedical Engineering – SBEB, this book gives emphasis to research and developments carried out by Brazilian scientists, institutions and professionals. It offers an extensive overview on new trends and clinical implementation of technologies, and it is intended to foster communication and collaboration between medical scientists, engineers, and researchers inside and outside the country.
Download or read book Fundamentals of Engineering Tribology with Applications written by Harish Hirani and published by Cambridge University Press. This book was released on 2016-03-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is related to friction, wear and lubrication of machine elements. Tribology not only deals with the design of fluid containment systems like seals and gasket but also with the lubrication of surfaces in relative motion. This book comprehensively discusses the theories and applications of hydrodynamic thrust bearing, gas (air) lubricated bearing and elasto-hydrodynamic lubrication. It elucidates the concepts related to friction, including coefficient of friction, friction instability and stick-slip motion. It clarifies the misconception that harder and cleaner surfaces produce better results in wear. Recent developments, including online condition monitoring (an integration of moisture sensor, wear debris and oil quality sensors) and multigrid technique, are discussed in detail. The book also offers design problems and their real-life applications for cams, followers, gears and bearings. MATLAB programs, frequently asked questions and multiple choice questions are interspersed throughout for easy understanding of the topics.
