Download or read book Characterization of Diamond like Carbon Films and Their Application as Overcoats on Thin Film Media for Magnetic Recording written by Hsiao-chu Tsai and published by . This book was released on 1986 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Status and Applications of Diamond and Diamond Like Materials written by National Research Council and published by National Academies Press. This book was released on 1990-02-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent discoveries enabling the growth of crystalline diamond by chemical vapor deposition offer the potential for a wide variety of new applications. This new book examines the state of the technology arising from these discoveries in relation to other allied materials, such as high-pressure diamond and cubic boron nitride. Most of the potential defense, space, and commercial applications are related to diamond's hardness, but some utilize its other qualities, such as optical and electronic properties. The authors review growth processes and discuss techniques for characterizing the resulting materials' properties. Crystalline diamond is emphasized, but other diamond-like materials (e.g. silicon carbide and amorphous carbon containing hydrogen) are also examined. In addition, the authors identify scientific, technical, and economic problems that could impede the rapid exploitation of these materials, and present recommendations covering broad areas of research and development.
Download or read book Diamond Like Carbon Coatings written by Peerawatt Nunthavarawong and published by CRC Press. This book was released on 2022-08-08 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond-like carbons (DLCs) display a number of attractive properties that make them versatile coating materials for a variety of applications, including extremely high hardness values, very low friction properties, very low gas permeability, good biocompatibility, and very high electrical resistivity, among others. Further research into this material is required to produce hydrogen-free DLC films and to synthesize it together with other materials, thereby obtaining better film properties. Diamond-Like Carbon Coatings: Technologies and Applications examines emerging manufacturing technologies for DLCs with the aim of improving their properties for use in practical applications. Discusses DLC coatings used in mechanical, manufacturing, and medical applications Details recent developments in the novel synthesis of DLC films Covers advances in understanding of chemical, structural, physical, mechanical, and tribological properties for modern material processing Highlights methods to yield longer service life Considers prospects for future applications of emerging DLC technologies This work is aimed at materials science and engineering researchers, advanced students, and industry professionals.
Download or read book Diamond Electronic Properties and Applications written by Lawrence S. Pan and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of diamond for electronic applications is not a new idea. As early as the 1920's diamonds were considered for their use as photoconductive detectors. However limitations in size and control of properties naturally limited the use of diamond to a few specialty applications. With the development of diamond synthesis from the vapor phase has come a more serious interest in developing diamond-based electronic devices. A unique combination of extreme properties makes diamond partiCularly well suited for high speed, high power, and high temperature applications. Vapor phase deposition of diamond allows large area films to be deposited, whose properties can potentially be controlled. Since the process of diamond synthesis was first realized, great progress have been made in understanding the issues important for growing diamond and fabricating electronic devices. The quality of both intrinsic and doped diamond has improved greatly to the point that viable applications are being developed. Our understanding of the properties and limitations has also improved greatly. While a number of excellent references review the general properties of diamond, this volume summarizes the great deal of literature related only to electronic properties and applications of diamond. We concentrate only on diamond; related materials such as diamond-like carbon (DLC) and other wide bandgap semiconductors are not treated here. In the first chapter Profs. C. Y. Fong and B. M. Klein discuss the band structure of single-crystal diamond and its relation to electronic properties.
Download or read book Thin Film Diamond written by A.H. Lettington and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work, written by leading international authorities, deals with nucleation growth and processing, characterization and electrical, thermal, optical and mechanical properties of thin film diamond. The final chapters are devoted to the broad range of applications of this material.
Download or read book Deposition Characterization and Tribological magnetic Studies of Diamond like Carbon and Magnetic Thin Films written by Geng Wang and published by . This book was released on 1997 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Protective Coatings and Thin Films written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled "Protective Coatings and Thin Films : Synthesis, Characterization and Applications" contains the Proceedings of the NATO Advanced Research Workshop (ARW) held in Alvor, Portugal from May 30 to June 5, 1996. This NATO-ARW was an expert meeting on the surface protection and modification of solid materials subjected to interactions with the environment. The meeting attracted 10 key speakers, 40 contributing speakers and 3 observers from various countries. The existing knowledge and current status of the science and technology related to protective coatings and thin films were assessed through a series of oral presentations, key notes (titles underlined in the volume content) and contributed papers distributed over various sessions dealing with: (a) plasma-assisted physical and chemical vapor deposition processes to enhance wear and corrosion protection of materials, (b) low friction coatings operating in hostile environment (vacuum, space, extreme temperatures, . . . ), (c) polymer films for protection against mechanical damage and chemical attack, (d) characterization of the structure of films and correlations with mechanical properties, (e) wear and corrosion resistant thermal spray coatings, (f) functional gradient ceramic/metallic coatings produced by high energy laser beam and energetic deposition processes for high temperature applications, (g) protective coatings for optical systems, and (h) ion beam assisted deposition of coatings for protection of materials against aqueous corrosion.
Download or read book Tribology of Carbon Films as Protective Overcoats for High Areal Density Disk Drive Applications written by Walton Fong and published by . This book was released on 2002 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon written by Tapan Gupta and published by Springer. This book was released on 2017-10-25 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: All living things contain carbon in some form, as it is the primary component of macromolecules including proteins, lipids, nucleic acids (RNA and DNA), and carbohydrates. As a matter of fact, it is the backbone of all organic (chemistry) compounds forming different kinds of bonds. Carbon: The Black, the Gray and the Transparent is not a complete scientific history of the material, but a book that describes key discoveries about this old faithful element while encouraging broader perspectives and approaches to its research due to its vast applications. All allotropes of carbon are described in this book, along with their properties, uses, and methods of procurement or manufacturing. Black carbon is represented by coal, gray carbon is represented by graphite, and transparent carbon is represented by diamond.
Download or read book Tribology and Mechanics of Magnetic Storage Devices written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic recording is presently a $50 billion industry. It spans audio, video, and digi tal applications in the form of tapes and disks. The industry is expected to grow by a factor of five or more in the next decade. This growth will be accompanied by dramatic improvements in the technology, and the potential exists for magnetic-recording den sities to improve by at least one order of magnitude! Magnetic-recording process is accomplished by relative motion between a mag netic head and a magnetic medium. Types of magnetic media for digital recording are: flexible media (tapes and floppy disks) and rigid disks. Physical contact between head and medium occurs during starts and stops and hydrodynamic air film develops at high speeds. Hying heights (mean separation between head and medium) are on the order of 0. 1 micrometer comparable to surface roughness of the mating members. Need for higher and higher recording densities requires that surfaces be as smooth as possible and flying heights be as low as possible. Smoother surfaces lead to increased static/ kinetic friction and wear. In the case of magnetic tapes, in order to have high bit capac ity for a given size of a spool, we like to use as thin a tape substrate as possible. Thinner tapes are prone to local or bulk viscoelastic deformation during storage. This may lead to variations in head-tape separations resulting in problems in data reliability.
Download or read book Thin Film Diamond written by A.H. Lettington and published by Springer. This book was released on 2012-11-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work, written by leading international authorities, deals with nucleation growth and processing, characterization and electrical, thermal, optical and mechanical properties of thin film diamond. The final chapters are devoted to the broad range of applications of this material.
Download or read book SiC Natural and Synthetic Diamond and Related Materials written by A.A. Gippius and published by Elsevier. This book was released on 1992-04-24 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the burgeoning field of wide band gap materials. The 64 contributed and invited papers will do much to stimulate the well-justified ongoing work, both theoretical and experimental, in this area. The high standard of the papers attests to the significant progress that has been made in this field, as well as reporting on the challenging problems that still remain to be solved.
Download or read book Surfactants in Tribology 2 Volume Set written by Girma Biresaw and published by CRC Press. This book was released on 2011-06-17 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants play a critical role in tribology as they control friction, wear, and lubricant properties such as emulsification, demulsification, bioresistance, oxidation resistance, rust prevention, and corrosion resistance. The use of surfactants in tribology is a critical topic for scientists and engineers who are developing new materials and devi
Download or read book Tribological Applications of Composite Materials written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-14 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the current advances and practices in tribological applications of composite materials under various processes, presenting the development, characterization, and morphological properties of composite materials in tribological applications. It covers a wide range of subjects, extending from fundamental research on the tribological characteristics of various multi-phase materials to the final applications of composites in wear loaded, technical components. It brings together contributions from researchers who discusses innovative experimental approaches and analytical techniques, creating a reference with comprehensive coverage of modern research techniques and the potential application of tribological composites in biomedical, aerospace, automotive, marines and construction industries. This volume will be of interest to material science researchers working in both industry and academia
Download or read book Nanotribology written by Stephen M. Hsu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotribology: Critical Assessment and Research Needs is an excellent reference for both academic and industrial researchers working in the fields of nanotechnology, tribology, mechanical engineering, materials science and engineering, MEMS, NEMS, magnetic recording, and biomedical devices. It will also be of interest to those pursuing scanning probe microscopy, nanoimaging, mesomanufacturing, sensors, actuators, aerospace, defense (controllers, microsystems), and military systems. Nanotribology: Critical Assessment and Research Needs provides a critical assessment of the current state of the art of nanotribology within the context of MEMS, mesomanufacturing, nanotechnology and microsystems. It contains chapters written by the leading experts in these fields. It identifies gaps in current knowledge and barriers to applications, and recommends research areas that need to be addressed to enable the rapid development of technologies.
Download or read book Diffractive Optics and Optical Microsystems written by S. Martellucci and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 20th Course of the International School of Quantum Electronics held in Erice, Italy, November 14-24, 1996
