Download or read book Characterization of Carbon Nanotube Based Composites under Consideration of Defects written by Moones Rahmandoust and published by Springer. This book was released on 2015-10-14 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the characterization methods involved with carbon nanotubes and carbon nanotube-based composites, with a more detailed look at computational mechanics approaches, namely the finite element method. Special emphasis is placed on studies that consider the extent to which imperfections in the structure of the nanomaterials affect their mechanical properties. These defects may include random distribution of fibers in the composite structure, as well as atom vacancies, perturbation and doping in the structure of individual carbon nanotubes.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Characterization of Carbon Nanotubes and Carbon Nanotube epoxy Composites written by Paul Matthew Saville and published by . This book was released on 2015 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical and electrical properties of carbon nanotube composites are attractive for a number of applications. The final properties depend on the quality of the feed stock, the amount of material used, and methods for de-aggregating and dispersing the nanotubes. Here, Fourier transform infrared spectroscopy, RAMAN spectroscopy, scanning electron microscopy, thermogravimetric analysis, and permittivity measurements are used to discern between three commercially available multi-walled carbon nanotubes (Nanocyl 7000, Cheap Tubes, and a sample of acid functionalized multi-walled nanotubes), and their epoxy composites. The RAMAN and thermogravimetric analysis data indicated that the Nanocyl had the most defects and impurities, however, the permittivity measurements and scanning electron microscopy data indicated that the Nanocyl nanotubes were well distributed in the matrix. The most important factors for dispersion and high permittivity appear to be the ability to de-aggregate the nanotubes, which is enabled by the short length, and a small diameter. The small diameter results in an overall longer length of carbon nanotube in the composite compared to an equal mass of larger diameter nanotubes.
Download or read book Characterization of Carbon Nanotubes and Carbon Nanotube eposxy Composites written by Paul Matthew Saville and published by . This book was released on 2015 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing and Characterization of Carbon Nanotubes Reinforced Epoxy Resin Based Multi scale Multi functional Composites written by Piyush R. Thakre and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This research is focused on investigating the effect of carbon nanotubes on macroscale composite laminate properties, such as, interlaminar shear strength, interlaminar fracture toughness and electrical conductivity along with studying the micro and nano-scale interactions of carbon nanotubes with epoxy matrix via thermomechanical and electrical characterization of nanocomposites. First an introduction to the typical advanced composite laminates and multifunctional nanocomposites is provided followed by a literature review and a summary of recent status on the processing and the characterization work on nanocomposites and composite laminates. Experimental approach is presented for the development of processing techniques and appropriate characterization methods for carbon nanotubes reinforced epoxy resin based multi-functional nanocomposites and carbon fiber reinforced polymer composite laminates modified with carbon nanotubes. The proposed work section is divided into three sub-sections to describe the processing and the characterization of carbon nanotube reinforced epoxy matrix nanocomposites, woven-carbon fabric epoxy matrix composite laminates modified with selective placement of nanotubes and unidirectional carbon fiber epoxy matrix composite laminates modified with carbon nanotubes. Efforts are focused on comparing the effects of functionalized and unfunctionalized carbon nanotubes on the advanced composite laminates. Covalently functionalized carbon nanotubes are used for improved dispersion and fiber-matrix bonding characteristics and compared with unfunctionalized or pristine carbon nanotubes. The processing of woven carbon fabric reinforced epoxy matrix composite laminates is performed using a vacuum assisted resin transfer molding process with selective placement of carbon nanotubes using a spraying method. The uni-directional carbon fiber epoxy matrix pre-preg composites are processed using a hot press technique along with the spraying method for placement of nanotubes. These macroscale laminates are tested using short beam shear and double cantilever beam experiments for investigating the effect of nanotubes on the interlaminar shear stress and the interlaminar fracture toughness. Fractography is performed using optical microscopy and scanning electron microscopy to investigate the structure-property relationship. The micro and nano-scale interactions of carbon nanotubes and epoxy matrix are studied through the processing of unfunctionalized and functionalized single wall carbon nanotube reinforced epoxy matrix nanocomposites. The multifunctional nature of such nanocomposites is investigated through thermo-mechanical and electrical characterizations.
Download or read book A Characterization of the Interfacial and Interlaminar Properties of Carbon Nanotube Modified Carbon Fiber epoxy Composites written by Ryan James Sager and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical characterization of the interfacial shear strength (IFSS) of carbon nanotube (CNT) coated carbon fibers and the interlaminar fracture toughness of woven fabric carbon fiber/epoxy composites toughened with CNT/epoxy interleave films is presented. The deposition of multiwalled carbon nanotubes (MWCNT) onto the surface of carbon fibers through thermal chemical vapor deposition (CVD) was used in an effort to produce a graded, multifunctional interphase region used to improve the interfacial strength between the matrix and the reinforcing fiber. Characterization of the IFSS was performed using the single-fiber fragmentation test. It is shown that the application of a MWCNT coating improves the interfacial shear strength between the coated fiber and matrix when compared with uncoated fibers. The effect of CNT/epoxy thin interleave films on the Mode I interlaminar fracture toughness of woven fabric carbon/epoxy composites is examined using the double-cantilever beam (DCB) test. Initiation fracture toughness, represented by critical strain energy release rate (GIC), is shown to improve over standard un-toughened composites using amine-functionalized CNT/epoxy thin films. Propagation fracture toughness is shown to remain unaffected using amine-functionalized CNT/epoxy thin films with respect to standard un-toughened composites.
Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Download or read book Fabrication and Characterization of Carbon Nanotube Reinforced Epoxy Composites and Their Applications in Cfrp steel Double Strap Joints as Structural Adhesives written by Asghar Habibnejad Korayem and published by . This book was released on 2013 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impressive mechanical properties of carbon fibre reinforced polymer (CFRP) have stimulated research interest in the application of CFRP for the retrofitting and strengthening of ageing infrastructures. However, some obstacles such as debonding and the low shear strength of the bond, particularly at temperature about the glass transition temperature (Tg) of bond adhesive, limit the use of CFRP with steel structures. Nanofillers such as carbon nanotubes (CNTs) have the potential to improve the mechanical and thermo-mechanical properties of epoxy resin systems for this purpose.The objectives of the present work were thus threefold: (1) to understand the mechanical properties of CNTs via buckling analysis using molecular dynamics simulations, (2) to fabricate and characterize CNT reinforced epoxy composites to improve their mechanical and thermo-mechanical properties, and investigating the effect of ultrasonication energy, CNT geometry, dispersant type, and type of epoxy on the final properties, and (3) to apply CNT reinforced epoxy resins as structural adhesives in CFRP strengthened steel structures subjected to moderately elevated temperatures.The results show that the compression load capacity of short multi-walled CNTs (MWCNTs) was greater than that of long MWCNTs. It was observed that the variation of the buckling strain of short MWCNTs was inversely proportional to the number of nanotube walls. For slender MWCNTs, the buckling strains fluctuated as the number of walls increased. The strain increased for beam-like buckling mode, decreased for shell-like buckling mode and was approximately constant for shell-beam-like buckling mode. Increase in the length of MWCNT also led to a significant decrease of the buckling strain for short MWCNTs. However, chirality had no significant effect on the buckling strain of MWCNTs, nor did it alter the buckling mode of short MWCNTs.To obtain effective dispersion of CNTs in an epoxy matrix, high shear mixing, ultrasonication treatments and surfactants were found to be essential. It was shown that it is important to use a set of compatible key parameters such as sufficient sonication energy, a strong dispersant, together with the appropriate CNTs. The results show that using ductile epoxy with 3 wt.% CNT masterbatch could enhance Young's modulus by 20%, tensile strength by 30%, flexural strength by 15%, and Tg by 34% of neat epoxy. The degree of CNT dispersion is not only a matter of the copolymer surfactant concentration; the copolymer adsorption morphology on the surface of CNTs also plays a role. Three adsorption morphologies, i.e. random, hemi-micelle, and cylindrical morphology, of BYK 9076 copolymer on the CNT surface were observed at different copolymer/CNT ratios. It was found that hemi-micelle morphology could prevent the agglomeration of CNTs when CNT concentration increased up to 8.7 mg/ml, whereas a cylindrical morphology was more efficient and stable in providing dispersion of a higher concentration of CNTs.It was found that the failure mode in both double strap joints with neat epoxy and/or CNT-epoxy was a combination of steel-adhesive interface failure, cohesive failure, epoxy-CFRP interface failure and CFRP delamination. Joints bonded with CNT-epoxy adhesive possessed an effective bond length of about 60 mm, whereas the effective bond length of joints bonded with neat epoxy was about 70 mm. Increasing the test temperature caused a transition of failure mode from the epoxy-CFRP interface to the steel-epoxy interface and to the cohesive layer in joints with neat epoxy. The cohesive failure could be avoided in the joints with CNT-epoxy. Observations from scanning electron microscopy revealed that CNTs bridge the cracks in epoxy matrix, providing a reinforcing effect. Overall, CNT-epoxy resin systems can provide a significant increase (about two-fold) in bond strength at moderately elevated temperatures compared with neat epoxy.
Download or read book Characterization of Epoxi Based Composite with Carbon Nanotubes written by Mariano Garrido Pacheco and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation exposes the characterisation of a nanocomposite made of epoxy resin with carbon nanotubes. The project involves the production of the materials and the fabrication of the specimens to be tested thermally and mechanically. The aim of this work is to show the thermal and mechanical improvement achieved in the epoxy resin by the incorporation of a small amount of carbon nanotubes. The experiment will show special interest in the study of the thermal characteristics of the nanocomposite. There have been insufficient studies about thermal properties on carbon nanotube-epoxy materials with low percentage of carbon nanotube reinforcement. Therefore, the data gathered in this study will help to improve the knowledge of the thermal behaviour of this type of materials. The initial stage of the project is focused in the development of the methodology to be followed during the characterisation. This part will be also destined to carry out a research on nanocomposites, carbon nanotubes and epoxy resins. The methodology developed for the characterization was based on the guidelines given by the American Society for Testing and Materials (ASTM) Standards for composite materials. The second part of the project covers the fabrication of the specimens and its thermal and mechanical characterisation. The results obtained will be exposed using graphic aids and tables. Finally, the last part of the report will be destined to the analysis of the data collected during the tests, and the production of conclusions. The results obtained from the thermal characterisation, performed using DSC and thermo gravimetric analysis, showed modifications in the thermal properties of the epoxy resin. Light changes in the temperature of the glass transition and the activation energy were detected. The mechanical characterisation performed using tensile, flexion and impact test, showed an increment in tensile and flexural strength due to the addition of CNs in the epoxy resin. The great interest from the industry in developing new polymer materials with improved properties, enhance the relevance of the topic presented.
Download or read book Epoxy Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a one-stop resource for in-depth knowledge on epoxy composites from leading voices in the field Used in a wide variety of materials engineering applications, epoxy composites are highly relevant to the work of engineers and scientists in many fields. Recent developments have allowed for significant advancements in their preparation, processing and characterization that are highly relevant to the aerospace and automobile industry, among others. In Epoxy Composites: Fabrication, Characterization and Applications, a distinguished team of authors and editors deliver a comprehensive and straightforward summary of the most recent developments in the area of epoxy composites. The book emphasizes their preparation, characterization and applications, providing a complete understanding of the correlation of rheology, cure reaction, morphology, and thermo-mechanical properties with filler dispersion. Readers will learn about a variety of topics on the cutting-edge of epoxy composite fabrication and characterization, including smart epoxy composites, theoretical modeling, recycling and environmental issues, safety issues, and future prospects for these highly practical materials. Readers will also benefit from the inclusion of: A thorough introduction to epoxy composites, their synthesis and manufacturing, and micro- and nano-scale structure formation in epoxy and clay nanocomposites An exploration of long fiber reinforced epoxy composites and eco-friendly epoxy-based composites Practical discussions of the processing of epoxy composites based on carbon nanomaterials and the thermal stability and flame retardancy of epoxy composites An analysis of the spectroscopy and X-ray scattering studies of epoxy composites Perfect for materials scientists, polymer chemists, and mechanical engineers, Epoxy Composites: Fabrication, Characterization and Applications will also earn a place in the libraries of engineering scientists working in industry and process engineers seeking a comprehensive and exhaustive resource on epoxy composites.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Carbon Nanotubes written by Arvind Agarwal and published by CRC Press. This book was released on 2018-09-03 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Foreword, written by legendary nano pioneer M. Meyyappan, Chief Scientist for Exploration Technology NASA Ames Research Center, Moffett Field, California, USA: "...there is critical need for a book to summarize the status of the field but more importantly to lay out the principles behind the technology. This is what Professor Arvind Agarwal and his co-workers ... have done here." Carbon Nanotubes: Reinforced Metal Matrix Composites reflects the authors’ desire to share the benefits of nanotechnology with the masses by developing metal matrix carbon nanotube (MM-CNT) composites for large-scale applications. Multiwall carbon nanotubes can now be produced on a large scale and at a significantly reduced cost. The book explores potential applications and applies the author’s own research to highlight critical developmental issues for different MM-CNT composites—and then outline novel solutions. With this problem-solving approach, the book explores: Advantages, limitations, and the evolution of processing techniques used for MM-CNT composites Characterization techniques unique to the study of MM-CNT composites—and the limitations of these methods Existing research on different MM-CNT composites, presented in useful tables that include composition, processing method, quality of CNT dispersion, and properties The micro-mechanical strengthening that results from adding CNT The applicability of micro-mechanics models in MM-CNT composites Significance of chemical stability for carbon nanotubes in the metal matrix as a function of processing, and its impact on CNT/metal interface and mechanical properties Computational studies that have not been sufficiently covered although they are essential to research and development The critical issue of CNT dispersion in the metal matrix, as well as a unique way to quantify CNT distribution and subsequently improve control of the processing parameters for obtaining improved properties Carbon Nanotubes: Reinforced Metal Matrix Composites paints a vivid picture of scientific and application achievements in this field. Exploring the mechanisms through which CNTs are enhancing the properties of different metal-based composites, the authors provide a roadmap to help researchers develop MM-CNT composites and choose potential materials for use in emerging areas of technology.
Download or read book Carbon Nanotechnology written by Liming Dai and published by Elsevier. This book was released on 2006-04-18 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is no longer a merely social talking point and is beginning to affect the lives of everyone. Carbon nanotechnology as a major shaper of new nanotechnologies has evolved into a truly interdisciplinary field, which encompasses chemistry, physics, biology, medicine, materials science and engineering. This is a field in which a huge amount of literature has been generated within recent years, and the number of publications is still increasing every year. Carbon Nanotechnology aims to provide a timely coverage of the recent development in the field with updated reviews and remarks by world-renowned experts. Intended to be an exposition of cutting-edge research and development rather than a kind of conference proceeding, Carbon Nanotechnology will be very useful not only to experienced scientists and engineers, who wish to broaden their knowledge of the wide-ranging nanotechnology and/or to develop practical devices, but also to graduate and senior undergraduate students who look to make their mark in this field of the future. · A comprehensive treatment from materials chemistry and structure-property to practical applications· Offers an in-depth analysis of various carbon nanotechnologies from both fundamental and practical perspectives· An easily accessible assessment of the materials properties and device performances based on all of the major classes of carbon nanomaterials, including: carbon fiber; diamond; C60; and carbon nanotubes· A concise compilation of the practical applications of carbon nanotechnologies from polymer-carbon nanocomposites to sensors, electron emitters, and molecular electronics
Download or read book MECHANICAL PROPERTIES AND CHARACTERIZATION OF EPOXY AND CARBON FIBER EPOXY COMPOSITES MODIFIED WITH HIGHLY ENTANGLED AS RECEIVED AND ACID TREATED CARBON NANOTUBES written by and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Huntsman-Merrimack MIRALON® carbon nanotubes (CNT's) are a novel, highly entangled, commercially available, and scalable format of nanotubes. As-received and acid-treated CNT's were added to aerospace grade epoxy (CYCOM® 977-3) and the composites were characterized. The epoxy resin is expected to infiltrate the network of the CNT's and could improve mechanical properties. Epoxy composites were tested for flexural and viscoelastic properties and the as-received and acid treated CNT's were characterized using field-emission scanning and transmission electron microscopy, thermogravimetric analysis, and Raman and X-ray photoelectron spectroscopy. Composites containing 0.4 wt% as-received CNT's showed an increase in flexural strength, from 136.9 MPa for neat epoxy to 147.5 MPa. In addition, the flexural modulus increased from 3.88 GPa for the neat epoxy to 4.24 GPa and 4.49 GPa for the 2.0 wt% and 3.0 wt% as-received CNT/epoxy composites, respectively. FE-SEM micrographs indicated good dispersion of the CNT's in the epoxy composites containing as-received CNT's and CNT's treated for 6 hours in 10 M nitric acid at 120 °C. CNT's treated with 10 M nitric acid for 6 hours at 120 °C added oxygen containing functional groups (C-O, C=O, and O=C-O) and removed iron catalyst present on the as-received CNT's, but the flexural properties of to the as-received CNT/epoxy composites. As-received and highly entangled Huntsman-Merrimack MIRALON® CNT sock materials (HGR and/or X55 grades) were added to unidirectional Hexcel HexTow IM7 carbon fiber/Solvay CYCOM® 977-3 epoxy prepreg system and the hybrid composites were characterized for tensile, flexural, and short beam shear properties. The incorporation of 1 CNT sock layer interleaving all of the CF/epoxy prepreg layers in the layup did not improve either the 0° or 90° tensile or flexural properties of the composite. Additionally, there was no improvement in the interlaminar shear strength of the hybrid composites, when 1, 2, or 3 CNT sock layers (HGR and X55 grades) were added between each CF/epoxy prepreg layer
Download or read book Organized Networks of Carbon Nanotubes written by K.R.V. Subramanian and published by CRC Press. This book was released on 2020-03-17 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, meshes and networks formed out of multiwalled carbon nanotubes are investigated and analyzed, including their use in niche applications such as electro-optic devices, advanced mechanical, thermal and electrical property enhancement, and gene editing. Different properties of multi-walled carbon nanotubes, including random network formation, ordering the meshes and networks by mechanical agitation and application of an external field, using crystallization and cross-linking induced phase separation in homopolymers-CNT composites are discussed with theoretical analysis. The book is aimed at researchers and graduate students in Electrical Engineering; Materials Science and Engineering; Chemical Engineering and Nanotechnology, Electronic circuit design, manufacturing, and characterization.
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Fabrication and Characterization of Epoxy and Carbon epoxy Composites Modified with Functionalized Carbon Nanotubes written by Mahmud Bin Abdus Salam and published by . This book was released on 2012 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: