Download or read book Characterization in Compound Semiconductor Processing written by Gary E. McGuire and published by Momentum Press. This book was released on 2010-01-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound semiconductors such as Gallium Arsenide, Gallium Aluminum Arsenide, and Indium Phosphide are often difficult to characterize and present a variety of challenges from substrate preparation, to epitaxial growth to dielectric film deposition to dopant introduction. This book reviews the common classes of compound semiconductors, their physical, optical and electrical properties and the various types of methods used for characterizing them when analyzing for defects and application problems. The book features: -- Characterization of III-V Thin Films for Electronic and Optical applications -- Characterization of Dielectric Insulating Film layers -- A Special case study on Deep Level Transient Spectroscopy on GaAs -- Concise summaries of major characterization technologies for compound semiconductor materials, including Auger Electron Spectroscopy, Ballistic Electron Emission Microscopy, Energy-Dispersive X-Ray Spectroscopy, Neutron Activation Analysis and Raman Spectroscopy
Download or read book Handbook of Compound Semiconductors written by Paul H. Holloway and published by Cambridge University Press. This book was released on 2008-10-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.
Download or read book Encyclopedia of Materials Characterization written by Charles A. Evans and published by Gulf Professional Publishing. This book was released on 1992 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is a comprehensive volume on analytical techniques used in materials science for the characterization of surfaces, interfaces and thin films. This flagship volume is a unique, stand-alone reference for materials science practitioners, process engineers, students and anyone with a need to know about the capabilities available in materials analysis. An encyclopedia of 50 concise articles, this book will also be a practical companion to the forthcoming books in the series."--Knovel.
Download or read book Semiconductor Characterization written by W. Murray Bullis and published by American Institute of Physics. This book was released on 1996 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market: Those in government, industry, and academia interested in state-of-the-art knowledge on semiconductor characterization for research, development, and manufacturing. Based on papers given at an International Nist Workshop in January 1995, Semiconductor Characterization covers the unique characterization requirements of both silicon IC development and manufacturing, and compound semiconductor materials, devices, and manufacturing. Additional sections discuss technology trends and future requirements for compound semiconductor applications. Also highlighted are recent developments in characterization, including in- situ, in-FAB, and off-line analysis methods. The book provides a concise, effective portrayal of industry needs and problems in the important specialty of metrology for semiconductor technology.
Download or read book Vapor Crystal Growth and Characterization written by Ching-Hua Su and published by Springer Nature. This book was released on 2020-01-14 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes developments in the crystal growth of bulk II-VI semiconductor materials. A fundamental, systematic, and in-depth study of the physical vapor transport (PVT) growth process is the key to producing high-quality single crystals of semiconductors. As such, the book offers a comprehensive overview of the extensive studies on ZnSe and related II-VI wide bandgap compound semiconductors, such as CdS, CdTe, ZnTe, ZnSeTe and ZnSeS. Further, it shows the detailed steps for the growth of bulk crystals enabling optical devices which can operate in the visible spectrum for applications such as blue light emitting diodes, lasers for optical displays and in the mid-IR wavelength range, high density recording, and military communications. The book then discusses the advantages of crystallization from vapor compared to the conventional melt growth: lower processing temperatures, the purification process associated with PVT, and the improved surface morphology of the grown crystals, as well as the necessary drawbacks to the PVT process, such as the low and inconsistent growth rates and the low yield of single crystals. By presenting in-situ measurements of transport rate, partial pressures and interferometry, as well as visual observations, the book provides detailed insights into in the kinetics during the PVT process. This book is intended for graduate students and professionals in materials science as well as engineers preparing and developing optical devices with semiconductors.
Download or read book Characterization in Silicon Processing written by Yale Strausser and published by Butterworth-Heinemann. This book was released on 1993 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.
Download or read book Compounts Semiconductors written by Paul H. Holloway and published by CRC Press. This book was released on 1989-12-27 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of the state-of-the-advancing-art in growth, processing and devices from compound semiconductors. Consisting of the proceedings of an important topical conference held at the University of Florida, speakers from both the U.S. and Japan were present. This fascinating work discusses critical issues in growth and characterization by semi-insulating bulk crystals, with particular emphasis placed on the latest modification of gas sources. It includes the advantages, limitations, and techniques pertaining to chemical vapor deposition. This compilation presents the most recent advances in the new technologies involving compound semiconductors, thus it fills an important need in the fast-moving field of microelectronics. This one-of-a-kind resource provides contrasts and insight into U.S. and Japanese technologies and devices as well as indications of future directions. It provides a very up-to-date and comprehensive treatment of world-class scientific and technological developments in this astounding area of major commercial importance. These proceedings will be a useful, indispensable resource for scientific researchers, process engineers, and technology strategists.
Download or read book Compound Semiconductors 2001 written by Y Arakawa and published by CRC Press. This book was released on 2002-09-30 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international perspective on recent research, Compound Semiconductors 2001 provides an overview of important developments in III-V compound semiconductors, such as GaAs, InP, and GaN; II-VI compounds, such as ZnSe and CdTe; and IV-IV compounds, such as SiC and SiGe. The book contains 139 papers arranged in chapters on electronic devices, optical devices, magnetic materials, novel systems, quantum transport, optical characterization, quantum nanostructures, and material growth and characterization. The content encompasses the development of optical and electronic devices based on nitride semiconductors as well as the steady advances in traditional topics like III-V-based electronic and optical devices, growth and processing, and characterization. The book also includes novel research trends in quantum structures, such as quantum wires and dots, and spintronics, which are very promising for future developments in nanotechnology. As the primary forum for research into these materials and their device applications, this resource is an essential reference for researchers working on compound semiconductors in semiconductor physics, device physics, materials science, chemistry, and electronic and electrical engineering.
Download or read book Semiconductor Materials Analysis and Fabrication Process Control written by G.M. Crean and published by Elsevier. This book was released on 2012-12-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing awareness that the successful implementation of novel material systems and technology steps in the fabrication of microelectronic and optoelectronic devices, is critically dependent on the understanding and control of the materials, the process steps and their interactions. The contributions in this volume demonstrate that characterisation and analysis techniques are an essential support mechanism for research in these fields. Current major research themes are reviewed both in the development and application of diagnostic techniques for advanced materials analysis and fabrication process control. Two distinct trends are elucidated: the emergence and evaluation of sophisticated in situ optical diagnostic techniques such as photoreflectance and spectroellipsometry and the industrial application of ultra-high sensitivity chemical analysis techniques for contamination monitoring. The volume will serve as a useful and timely overview of this increasingly important field.
Download or read book Compound Semiconductor Devices written by Kenneth A. Jackson and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound Semiconductor Devices provides a comprehensive insight into today ́s standard technologies, covering the vast range of semiconductor products and their possible applications. The materials covered runs from the basics of conventional semiconductor technology through standard,power and opto semiconductors, to highly complex memories and microcontrollers and the special devices and modules for smartcards, automotive electronics, consumer electronics and telecommunications. Some chapters are devoted to the production of semiconductor components and their use in electronic systems as well as to quality management. The book offers students and users a unique overview of technology, architecture and areas of application of semiconductor products.
Download or read book Semiconductor Nanostructures for Optoelectronic Devices written by Gyu-Chul Yi and published by Springer Science & Business Media. This book was released on 2012-01-13 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fabrication of optoelectronic nanodevices. The structures considered are nanowires, nanorods, hybrid semiconductor nanostructures, wide bandgap nanostructures for visible light emitters and graphene. The device applications of these structures are broadly explained. The book deals also with the characterization of semiconductor nanostructures. It appeals to researchers and graduate students.
Download or read book Vapor Crystal Growth and Characterization written by Ching-Hua Su and published by . This book was released on 2020 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes developments in the crystal growth of bulk II-VI semiconductor materials. A fundamental, systematic, and in-depth study of the physical vapor transport (PVT) growth process is the key to producing high-quality single crystals of semiconductors. As such, the book offers a comprehensive overview of the extensive studies on ZnSe and related II-VI wide bandgap compound semiconductors, such as CdS, CdTe, ZnTe, ZnSeTe and ZnSeS. Further, it shows the detailed steps for the growth of bulk crystals enabling optical devices which can operate in the visible spectrum for applications such as blue light emitting diodes, lasers for optical displays and in the mid-IR wavelength range, high density recording, and military communications. The book then discusses the advantages of crystallization from vapor compared to the conventional melt growth: lower processing temperatures, the purification process associated with PVT, and the improved surface morphology of the grown crystals, as well as the necessary drawbacks to the PVT process, such as the low and inconsistent growth rates and the low yield of single crystals. By presenting in-situ measurements of transport rate, partial pressures and interferometry, as well as visual observations, the book provides detailed insights into in the kinetics during the PVT process. This book is intended for graduate students and professionals in materials science as well as engineers preparing and developing optical devices with semiconductors.
Download or read book High Speed Compound Semiconductor Devices for Wireless Applications and State of the Art Program on Compound Semiconductors XXXIII written by A. G. Baca and published by The Electrochemical Society. This book was released on 2000 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings were published before the two symposia actually took place, and some of the papers presented were not received in time. The 21 that did make it discuss compound semiconductors from perspectives of recent developments in materials, growth, characterization, processing, device fabrication, and reliability. Among the specific topics are the non-crystallographic wet etching of gallium arsenide, fabricating an integrated optics One to Two optical switch, and the fabrication and materials characterization of pulsed laser deposited nickel silicide ohmic contacts to 4H n-SiC. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Processing and Properties of Compound Semiconductors written by and published by Elsevier. This book was released on 2001-10-20 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The Willardson and Beer series, as it is widely known, has succeeded in producing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise that this tradition will be maintained and even expanded.
Download or read book Compound Semiconductor Bulk Materials and Characterizations written by Osamu Oda and published by World Scientific. This book was released on 2007 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with compound semiconductor bulk materials and has been written for students, researchers and engineers in material science and device fabrication. It offers them the elementary and intermediate knowledge of compound semiconductor bulk materials necessary for entering this field. In the first part, the book describes the physical properties, crystal growth technologies, principles of crystal growth, various defects in crystals, characterization techniques and applications. In the second and the third parts, the book reviews various compound semiconductor materials, including important industrial materials and the results of recent research.
Download or read book Polymer Testing written by Muralisrinivasan Subramanian and published by Momentum Press. This book was released on 2012-06-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer research has been giving greater attention to the importance of the interdependence of applications and the behavior of polymeric materials. The complexities call for a self-contained reference work for students, polymer scientists, industrialists, chemists, and polymer technologists. This book is aimed at answering that call. It presents concepts at the intersections of polymer structure, polymer characterization, and new instrumental methodologies for assessing the characteristics of polymers. Various application requirements are covered, with recommendations for the types of instruments best suited for different testing circumstances. It overviews recent work in instrumental methods along with some of the significant advances in polymer characterization. References to key theoretical papers are provided. Possible trends and future developments in quantitative and qualitative analysis are also discussed. This book will encourage scientists and engineers in the polymers field to consider using the new approaches to testing, which can save time and effort in evaluating polymer samples. Students and professionals alike in the polymer processing industries will find this book to be a valuable resource--even a supplement to standard texts in polymer science and engineering.
Download or read book Managing for Ethical Organizational Integrity written by Abe J. Zakhem and published by Momentum Press. This book was released on 2012 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides guidelines for ethical decision making in business that are philosophically sound and strategically advantageous. This title explains the concepts of basic and derivative rights in a way that can enable managers to identify those ethical duties that must be met in order to morally justify the pursuit of profit.
