Download or read book Characterization and Tribological Studies of Rail Top Materials written by Ka Yi Liu and published by . This book was released on 2009 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Tribological Materials written by William A. Glaeser and published by Momentum Press. This book was released on 2010 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the composition and structure of a surface is essential in understanding its frictional (Tribological) properties. This volume in the Materials Characterization series will focus on surface characterization, including roughness, hardness, coating thickness and bond strength. Advanced characterization methods are also covered for applications in magnetic recording media, rolling contact bearings and other high-tech systems. -- Reviews major physical principles of tribology, including adhesion, friction, abrasion and surface boundary conditions -- Special section on surface characterization of magnetic recording surfaces -- Concise summaries of major characterization technologies for tribological materials, including SEM, Energy-Dispersive X-Ray Spectroscopy, Fourier Transform Infrared Spectroscopy and Static Secondary Ion Mass Spectroscopy

Download or read book Tribology and Characterization of Surface Coatings written by Sarfraj Ahmed and published by John Wiley & Sons. This book was released on 2022-01-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.

Download or read book Characterization of Tribological Materials Second Edition written by William A. Glaeser and published by Momentum Press. This book was released on 2012-11-16 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text discusses the use of advanced surface science characterization techniques in friction, adhesive and abrasive wear, boundary lubrication, contact fatigue, and other important failure processes. Surface characterization of bearings, gears, seals, and other manufactured rolling and sliding surfaces are increasingly routine in advanced quality control of processes and in the manufacture of precision components. This book is an indispensable asset to scientists and engineers using tribological characterization techniques. New content in this edition include: • four new figures to illustrate real surface contact added to Chapter 1. • coverage of the use of the Environmental SEM (ESEM) in examining wear of fiber glass filled PTFE added to chapter 4. • new information on the wear of ceramics added to Chapter 5. • updates for new analytical systems added to Chapter 6. • coverage of Atomic Force Microscope (ATM) and its usefulness in the field of nano-tribology, providing not only full microtopography of surface roughness but also measurement of nano-friction and nanohardness of surface films, added in a new Chapter 9. • the 17 Appendices have been completely revamped with essential information organized into convenient tables.

Download or read book Tribology and Surface Engineering for Industrial Applications written by Catalin I. Pruncu and published by CRC Press. This book was released on 2021-11-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Tribology and Surface Engineering for Industrial Applications discusses the latest in tribology and surface engineering for industrial applications. This book: Offers information on coatings and surface diagnostics Explains a variety of techniques for improved performance Describes applications in automotive, wheel and rail materials, manufacturing, and wind turbines Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in industrial applications of tribology and surface engineering for a variety of cross-disciplinary applications.

Download or read book Mechanical Tribology written by George E Totten and published by CRC Press. This book was released on 2019-08-30 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studying the morphology, defects, and wear behavior of a variety of material surfaces, Mechanical Tribology examines popular and emerging surface characterization techniques for assessment of the physical, mechanical, and chemical properties of various modified surfaces, thin films, and coatings. Its chapters explore a wide range of tribological applications while promoting reduced component deterioration and improved efficiency and reliability of mechanical systems. The book includes extensive coverage of critical technologies that are usually absent in other references on the subject, delving into procedures affecting metal cutting and forming, physicochemical issues involved in the design of fiber finishes, and recent progress in biotribological research. It provides strategies to characterize the friction and wear properties of tribological systems and procedures to assess the quality and lifetime of ceramic materials. It also outlines methods to avoid scuffing and seizure in machine operations and novel techniques to prevent oil from spreading and creeping in lubricating applications. Mechanical Tribology is a practical guide for mechanical, industrial, chemical, process, design, and process engineers, materials scientists, and tribologists in the selection of materials, surface treatments, coatings, and environments best suited for a particular industrial application.

Download or read book A New Approach in Tribological Characterization of High Performance Materials written by Grant R. Fox and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This research conducts tribological investigation in three areas. The first area of research is to obtain basic understanding of tribological properties of high performance Inconel alloys. Pin-on-disk testing was conducted through a range of applied normal loads and sliding velocities in an unlubricated condition. Average friction coefficient, friction work, and specific wear rates were calculated from the data and microscopy techniques were used to observe and characterize wear mechanisms. Experimental results show a dependence of average coefficient of friction as a function of frictional work. Also shown is the wear rate dependence on frictional work, predicated by a wear mechanism change. This research gives a tribological baseline for high performance alloys. The second area of research is in the in situ spatial study of friction, complemented by monitoring changes in electrical contact resistance (ECR). Pin-on-disk testing of samples was done under low normal loads and velocities. Friction and electrical contact resistance measurements were taken spatially in the wear track during each friction cycle, giving a spatial evolution of friction and resistance change, in situ. Results show a lowering in the ECR under increased friction cycles, which was closely related to a change in the friction coefficient of the material. Using surface profilometry and X-ray Photoelectron Spectroscopy, we determined that the lowering of resistance is a result of surface modification through wear and development of a friction induced conductive tribo-film. This research provides a simple method for in situ monitoring of friction and solidifies a fundamental relationship between friction and contact resistance. The third area of research is the design of a variable force tribometer, incorporating the fundamental results demonstrated in the first two experiments. The creation of a novel testing apparatus to test materials under dynamic tribological conditions is given in detail. Simple experiments were performed on an Inconel sample and preliminary results show how dynamic normal and tangential forces affect the friction coefficient. These early results utilizing the variable force tribometer will lay the groundwork for more advanced research into the dynamic nature of friction.

Download or read book Handbook of Railway Vehicle Dynamics Second Edition written by Simon Iwnicki and published by CRC Press. This book was released on 2019-11-14 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Railway Vehicle Dynamics, Second Edition, provides expanded, fully updated coverage of railway vehicle dynamics. With chapters by international experts, this work surveys the main areas of rolling stock and locomotive dynamics. Through mathematical analysis and numerous practical examples, it builds a deep understanding of the wheel-rail interface, suspension and suspension component design, simulation and testing of electrical and mechanical systems, and interaction with the surrounding infrastructure, and noise and vibration. Topics added in the Second Edition include magnetic levitation, rail vehicle aerodynamics, and advances in traction and braking for full trains and individual vehicles.

Download or read book Tribological Research and Design for Engineering Systems written by D. Dowson and published by Elsevier. This book was released on 2003-07-17 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers represent the proceedings from the 29th Leeds-Lyon Symposium on Tribology, 'Tribological Research and Design for Engineering Systems' which was held in September 2002. Over 130 delegates from 18 countries attended the symposium, and the extensive discussions generated over 150 written questions and responses, which are documented at the end of this proceedings volume.There have been many advances in the field of tribology in recent years, with progress being made in the engineering and interaction of surfaces; micro and nano-tribology; elastohydrodynamics; surface films; surface texture; tribochemistry; wear and life prediction; with both experimental and theoretical contributions. These advances were reviewed, and the impact of this understanding on the fundamentals upon total engineering activity in design, manufacture and machine operation were considered.Readership:Scientists and researchers in the field of tribology.

Download or read book Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2003-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research. Over 200 peer-reviewed papers including hot topics such as biomaterials and nano-tribology Keeping you up-to-date with the latest research from leading experts Includes communications and case studies

Download or read book European Science Notes written by and published by . This book was released on 1993 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rail Quality and Maintenance for Modern Railway Operation written by J.J. Kalker and published by Springer Science & Business Media. This book was released on 1993-07-31 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers on the theme of rail integrity, which were presented at a meeting in Delft from 24--26th June, 1992. Rolling contact fatigue is a failure mode which is increasingly being recognised as a threat to the reliability of modern heavy freight and high speed railway systems. These papers describe the current understanding of the problem and what rail steel technology and maintenance procedures have to offer to combat it.

Download or read book ESN Information Bulletin written by and published by . This book was released on 1993 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribological Behavior of Functional Surface written by Pawel Pawlus and published by MDPI. This book was released on 2021-08-31 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material loss due to wear and corrosion and high resistance to motion generate high costs. Therefore, minimizing friction and wear is a problem of great importance. This book is focused on the tribological behavior of functional surfaces. It contains information regarding the improvement of tribological properties of sliding elements via changes in surface topography. Tribological impacts of surface texturing depending on the creation of dimples on co-acting surfaces are also discussed. The effects of various coatings on the minimization of friction and wear and corrosion resistance are also studied. Friction can be also reduced by introducing a new oil.

Download or read book Tribological Processes in the Valve Train Systems with Lightweight Valves written by Krzysztof Jan Siczek and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribological Processes in Valvetrain Systems with Lightweight Valves: New Research and Modelling provides readers with the latest methodologies to reduce friction and wear in valvetrain systems—a severe problem for designers and manufacturers. The solution is achieved by identifying the tribological processes and phenomena in the friction nodes of lightweight valves made of titanium alloys and ceramics, both cam and camless driven. The book provides a set of structured information on the current tribological problems in modern internal combustion engines—from an introduction to the valvetrain operation to the processes that produce wear in the components of the valvetrain. A valuable resource for teachers and students of mechanical or automotive engineering, as well as automotive manufacturers, automotive designers, and tuning engineers. - Shows the tribological problems occurring in the guide-light valve-seat insert - Combines numerical and experimental solutions of wear and friction processes in valvetrain systems - Discusses various types of cam and camless drives the valves used in valve trains of internal combustion engines—both SI and CI - Examines the materials used, protective layers and geometric parameters of lightweight valves, as well as mating guides and seat inserts

Download or read book Lubrication at the Frontier The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime written by M. Priest and published by Elsevier. This book was released on 1999-07-01 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 25th Leeds-Lyon Symposium on Tribology was held at the Institut des Sciences Appliquées de Lyon, from 8-11th September, 1998. Its central theme was, "Lubrication at the frontier: the role of the interface and surface layers in the thin film and boundary regime". This topic was chosen because it represents an important evolution of the research field.The Symposium opened with a keynote address entitled "Role of surface-anchored polymer chains in polymer friction" which described the processes taking place at the interface between "solid" and "liquid". The keynote address was followed by two invited lectures. Firstly, "Fuel efficient engine oils, additive interactions, boundary friction and wear" presented the industrial point of view on lubricant formulation and engine testing and its evolution. The second lecture was entitled "For establishment of a new EHL theory" and stressed the need to extend the current EHL theory.Beginning in 1974, The Leeds-Lyon Symposia have now covered a wide range of topics. The essential aim each year is to select a topic of current interest to tribologists and to contribute to further the advance of knowledge in selected fields.

Download or read book Extreme Tribology written by Ahmed Abdelbary and published by CRC Press. This book was released on 2020-01-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is an unfamiliar term for many, but is experienced by all. It is the science of friction, wear and lubrication of contacting surfaces in relative motion. The aim of this book is to introduce the fundamentals of tribology as well as its challenges in extreme operating conditions. The book comprises a historical background and an introduction to familiarize both undergraduate and postgraduate readers with such an important topic. It addresses a comprehensive coverage of classical tribology of solid contacts, friction mechanics, wear mechanisms and lubrication technologies. The tribology of polymer composites, MEMS and NEMS are explored. In addition, tribology of automotive components is presented, as are tribological applications in many practical situations.Various test methods used in evaluating wear are reviewed. Diverse techniques applied in predicting wear behavior by mathematical models, FE modeling and ANN approach are discussed. The book reviews key features of extraordinary conditions associated with, but not limited to, harsh environments, severe sliding and poor lubrication challenges. A basic understanding of failure modes in tribological systems is covered. The state-of-the-art research on tribology under these extreme conditions is extensively discussed, which will be of interest to researchers. The book highlights solutions for extreme tribology problems and provides an overview of various factors affecting tribosystems in harsh conditions.