Download or read book Characterization and Optimization of Temperature sensitive Microbeads for Simultaneous Thermometry and Velocimetry for Fluid Dynamic Applications written by Trey Cottingham and published by . This book was released on 2015 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Luminescent paint is an established method for measuring both pressure and temperature distributions on surfaces. These Temperature-Sensitive Paints (TSP) and Pressure-Sensitive Paints (PSP) are commercially available and used regularly in the study of fluids. New microbeads using temperature-sensitive dyes were developed for applications in wind and water tunnel measurement. A novel method was developed to measure their response times to temperature changes. Their sensitivity to temperature change was also measured. A new optical system and software suite were developed. Methods for reducing spatial variations due to excitation energy were also developed.
Download or read book Development and Characterization of Pressure sensitive Microbeads for Simultaneous Barometry and Velocimetry for Fluid Dynamic Applications written by Daniel J. Lacroix and published by . This book was released on 2014 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of luminescent dyes to measure pressures and temperatures on surfaces using Pressure Sensitive Paint (PSP) and Temperature-Sensitive Paint (TSP) is a well-established methodology. New technology has allowed for microbeads to be loaded with pressure and/or temperature sensitive dyes. These microbeads can be seeded into flow fields in order to measure the pressure and/or temperature fields in the fluid flow. In addition, the microbeads act as tracer particles to the fluid velocity and therefore, standard PIV techniques can be applied to quantify the velocity of the flow simultaneously with the pressure and/or temperature measurement. Existing studies have investigated the use of polystyrene microbeads for simultaneous flow barometry and velocimetry yet the polystyrene microbeads have a slow response time to changing pressures, making them incapable of resolving accurate pressures in fast flow applications such as wind tunnels. In this contribution, silicon dioxide and oxide-based multi-dye microbeads were characterized and found to have much faster response times than polystyrene-based microbeads. The pressure response times and sensitivity of these microbeads were tested to determine the most viable candidate for future unsteady applications. It will also be shown that the intensity-based approach applied to these microbeads coated on a glass slide can be used to accurately measure pressure with a significantly high measure of precision and low pressure uncertainties down to 106Pa. Finally, this paper will demonstrate the feasibility of using aerosolized pressure-sensitive microbeads for simultaneous barometry and velocimetry for fluid dynamic applications.
Download or read book Microfluidic Technologies for Miniaturized Analysis Systems written by Steffen Hardt and published by Springer Science & Business Media. This book was released on 2007-09-29 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses Lab-on-a-Chip devices. It focuses on microfluidic technologies that have emerged in the past decade. Coverage presents a comprehensive listing of the most promising microfluidic technologies in the Lab-on-a-Chip field. It also details technologies that can be viewed as toolboxes needed to set up complex Lab-on-a-Chip systems.
Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.
Download or read book Laser Measurement Technology written by Axel Donges and published by Springer. This book was released on 2014-10-14 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser measurement technology has evolved in the last years in a versatile and reflationary way. Today, its methods are indispensable for research and development activities as well as for production technology. Every physicist and engineer should therefore gain a working knowledge of laser measurement technology. This book closes the gap of existing textbooks. It introduces in a comprehensible presentation laser measurement technology in all its aspects. Numerous figures, graphs and tables allow for a fast access into the matter. In the first part of the book the important physical and optical basics are described being necessary to understand laser measurement technology. In the second part technically significant measuring methods are explained and application examples are presented. Target groups of this textbook are students of natural and engineering sciences as well as working physicists and engineers, who are interested to make themselves familiar with laser measurement technology and its fascinating potentials.
Download or read book Materials Design and Applications II written by Lucas F. M. da Silva and published by Springer. This book was released on 2018-12-31 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights fundamental research on the design and application of engineering materials, and predominantly mechanical engineering applications. This area includes a wide range of technologies and materials, including metals, polymers, composites, and ceramics. Advanced applications include manufacturing cutting-edge materials, testing methods, and multi-scale experimental and computational aspects. The book introduces readers to a wealth of engineering applications in transport, civil, packaging and power generation.
Download or read book Lecture Series Boundary Layer Theory Laminar flows written by Hermann Schlichting and published by . This book was released on 1949 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Who s Who in Fluorescence 2009 written by Chris D. Geddes and published by Springer Science & Business Media. This book was released on 2009-04-02 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: th The Who’s Who in Fluorescence 2009 is the 7 volume of the Who’s who series. The previous six volumes (2003 – 2008) have been very well received by the fluorescence community, with 1000’s of copies being distributed around the world, through conferences and workshops, as well as through internet book sites. In addition, the Institute of Fluorescence (http://theinstituteoffluorescence.com/) mailed 100’s of copies of the 2008 volume to contributors around the world. This new 2009 volume features some 419 entries from no fewer than 41 countries worldwide, as compared to 418 entries (38 different countries) in 2008 and 405 entries in the 2007 volume, respectively. We have received 29 new entries this year, and deleted 25 entries that were not updated by contributors from past years. In 2008, 129 AIM numbers were submitted as compared to 106 in 2007. This year the number has risen again to 136 AIM numbers submitted. This year we also see the introduction of the h-index number listing, a publication statistic provided by the Thompson’s ISI Web of Science. Some 42 contributors provided their h-numbers. In 2009 we also see a continued and strong company support, in light of the current world economic climate, which will enable us to further disseminate the volume in 2009– 2010. In this regard we especially thank the instrumentation companies for their continued support, where without their financial contributions, it is likely that the volume would not be the success it is today.
Download or read book Nondestructive Materials Characterization written by Norbert G. H. Meyendorf and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on aircraft materials, this book describes techniques for the material characterization to detect and quantify degradation processes such as corrosion and fatigue. It introduces readers to these techniques based on x-ray, ultrasonic, optical and thermal principles and demonstrates the potential of the techniques for a wide variety of applications concerning aircraft materials, especially aluminum and titanium alloys. The advantages and disadvantages of various techniques are evaluated.
Download or read book Methods in Bioengineering written by Kaushal Rege and published by Artech House. This book was released on 2009 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book is part of the new Artech House Methods in Bioengineering series - volumes designed to offer detailed guidance on authoritative methods for addressing specific bioengineering challenges. This volume is focused on the materials involved with nanoscale bioengineering. Nanomaterials are quickly moving into the mainstream as a critical component of biological research. Filling a critical gap in the current literature, this new resource presents practical, step-by-step methods to help professionals synthesize, characterize, functionalize and apply the nanomaterial that is most suitable for handling a given nanoscale bioengineering problem. Written and presented by the best scientists and engineers in their respective fields, the authors offer a clear and detailed understanding of how to carry out a wide range of important methods in this area.
Download or read book Technical Papers written by and published by . This book was released on 1964 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microbiorobotics written by Minjun Kim and published by William Andrew. This book was released on 2012-03-08 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiorobotics is a new engineering discipline that inherently involves a multidisciplinary approach (mechanical engineering, cellular biology, mathematical modeling, control systems, synthetic biology, etc). Building robotics system in the micro scale is an engineering task that has resulted in many important applications, ranging from micromanufacturing techniques to cellular manipulation. However, it is also a very challenging engineering task. One of the reasons is because many engineering ideas and principles that are used in larger scales do not scale well to the micro-scale. For example, locomotion principles in a fluid do not function in the same way, and the use of rotational motors is impractical because of the difficulty of building of the required components. Microrobotics is an area that is acknowledged to have massive potential in applications from medicine to manufacturing. This book introduces an inter-disciplinary readership to the toolkit that micro-organisms offer to micro-engineering The design of robots, sensors and actuators faces a range of techology challenges at the micro-scale. This book shows how biological techniques and materials can be used to meet these challenges World-class multi-disciplanry editors and contributors leverage insights from engineering, mathematical modeling and the life sciences – creating a novel toolkit for microrobotics
Download or read book Experimentation Validation and Uncertainty Analysis for Engineers written by Hugh W. Coleman and published by John Wiley & Sons. This book was released on 2018-04-09 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps engineers and scientists assess and manage uncertainty at all stages of experimentation and validation of simulations Fully updated from its previous edition, Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition includes expanded coverage and new examples of applying the Monte Carlo Method (MCM) in performing uncertainty analyses. Presenting the current, internationally accepted methodology from ISO, ANSI, and ASME standards for propagating uncertainties using both the MCM and the Taylor Series Method (TSM), it provides a logical approach to experimentation and validation through the application of uncertainty analysis in the planning, design, construction, debugging, execution, data analysis, and reporting phases of experimental and validation programs. It also illustrates how to use a spreadsheet approach to apply the MCM and the TSM, based on the authors’ experience in applying uncertainty analysis in complex, large-scale testing of real engineering systems. Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition includes examples throughout, contains end of chapter problems, and is accompanied by the authors’ website www.uncertainty-analysis.com. Guides readers through all aspects of experimentation, validation, and uncertainty analysis Emphasizes the use of the Monte Carlo Method in performing uncertainty analysis Includes complete new examples throughout Features workable problems at the end of chapters Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition is an ideal text and guide for researchers, engineers, and graduate and senior undergraduate students in engineering and science disciplines. Knowledge of the material in this Fourth Edition is a must for those involved in executing or managing experimental programs or validating models and simulations.
Download or read book High speed Wind Tunnel Testing written by Alan Pope and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passive Micromixers written by Mubashshir Ansari A. (Ed.) and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Biomolecular Simulations written by International Business Machines Corporation and published by American Institute of Physics. This book was released on 1991 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Computing Systems and Applications written by Jonathan Schaeffer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major advances in computing are occurring at an ever-increasing pace. This is especially so in the area of high performance computing (HPC), where today's supercomputer is tomorrow's workstation. High Performance Computing Systems and Applications is a record of HPCS'98, the 12th annual Symposium on High Performance Computing Systems and Applications. The quality of the conference was significantly enhanced by the high proportion of keynote and invited speakers. This book presents the latest research in HPC architecture, networking, applications and tools. Of special note are the sections on computational biology and physics. High Performance Computing Systems and Applications is suitable as a secondary text for a graduate-level course on computer architecture and networking, and as a reference for researchers and practitioners in industry.
