Download or read book Characterization and Leach Testing for REDOX Sludge and S Saltcake Actual Waste Sample Composites written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes processing and analysis results of boehmite waste type (Group 5) and insoluble high Cr waste type (Group 6). The sample selection, compositing, subdivision, physical and chemical characterization are described. Extensive batch leach testing was conducted to define kinetics and leach factors of selected analytes as functions of NaOH concentration and temperature. Testing supports issue M-12 resolution for the Waste Treatment Plant.
Download or read book Filtration and Leach Testing for REDOX Sludge and S Saltcake Actual Waste Sample Composites written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan.() The test program was subdivided into logical increments. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Under test plan TP-RPP-WTP-467, eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. Under this test plan, a waste-testing program was implemented that included: Homogenizing the archive samples by group as defined in the test plan Characterizing the homogenized sample groups Performing parametric leaching testing on each group for compounds of interest Performing bench-top filtration/leaching tests in the hot cell for each group to simulate filtration and leaching activities if they occurred in the UFP2 vessel of the WTP Pretreatment Facility. This report focuses on filtration/leaching tests performed on two of the eight waste composite samples and follow-on parametric tests to support aluminum leaching results from those tests.
Download or read book Characterization and Leach Testing for PUREX Cladding Waste Sludge Group 3 and REDOX Cladding Waste Sludge Group 4 Actual Waste Sample Composites written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan.(a) The testing program was subdivided into logical increments. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. The actual wastetesting program included homogenizing the samples by group, characterizing the solids and aqueous phases, and performing parametric leaching tests. Two of the eight defined groups--plutonium-uranium extraction (PUREX) cladding waste sludge (Group 3, or CWP) and reduction-oxidation (REDOX) cladding waste sludge (Group 4, or CWR)--are the subjects of this report. Both the Group 3 and 4 waste composites were anticipated to be high in gibbsite, requiring caustic leaching. Characterization of the composite Group 3 and Group 4 waste samples confirmed them to be high in gibbsite. The focus of the Group 3 and 4 testing was on determining the behavior of gibbsite during caustic leaching. The waste-type definition, archived sample conditions, homogenization activities, characterization (physical, chemical, radioisotope, and crystal habit), and caustic leaching behavior as functions of time, temperature, and hydroxide concentration are discussed in this report. Testing was conducted according to TP-RPP-WTP-467.
Download or read book Engineering Separations Unit Operations for Nuclear Processing written by Reid Peterson and published by CRC Press. This book was released on 2019-11-15 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Separations Unit Operations for Nuclear Processing provides insight into the fundamentals of separations in nuclear materials processing not covered in typical texts. This book integrates fuel cycle and waste processing into a single, coherent approach, demonstrating that the principles from one field can and should be applied to the other. It provides historical perspectives on nuclear materials processing, current assessment and challenges, and how past challenges were overcome. It also provides understanding of the engineering principles associated with handling nuclear materials. This book is aimed at researchers, graduate students, and professionals in the fields of chemical engineering, mechanical engineering, nuclear engineering, and materials engineering.
Download or read book Filtration and Leach Testing for PUREX Cladding Sludge and REDOX Cladding Sludge Actual Waste Sample Composites written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A testing program evaluating actual tank waste was developed in response to Task 4 from the M-12 External Flowsheet Review Team (EFRT) issue response plan (Barnes and Voke 2006). The test program was subdivided into logical increments. The bulk water-insoluble solid wastes that are anticipated to be delivered to the Hanford Waste Treatment and Immobilization Plant (WTP) were identified according to type such that the actual waste testing could be targeted to the relevant categories. Under test plan TP RPP WTP 467 (Fiskum et al. 2007), eight broad waste groupings were defined. Samples available from the 222S archive were identified and obtained for testing. Under this test plan, a waste testing program was implemented that included: - Homogenizing the archive samples by group as defined in the test plan. - Characterizing the homogenized sample groups. - Performing parametric leaching testing on each group for compounds of interest. - Performing bench-top filtration/leaching tests in the hot cell for each group to simulate filtration and leaching activities if they occurred in the UFP2 vessel of the WTP Pretreatment Facility. This report focuses on a filtration/leaching test performed using two of the eight waste composite samples. The sample groups examined in this report were the plutonium-uranium extraction (PUREX) cladding waste sludge (Group 3, or CWP) and reduction-oxidation (REDOX) cladding waste sludge (Group 4, or CWR). Both the Group 3 and 4 waste composites were anticipated to be high in gibbsite, thus requiring caustic leaching. WTP RPT 167 (Snow et al. 2008) describes the homogenization, characterization, and parametric leaching activities before benchtop filtration/leaching testing of these two waste groups. Characterization and initial parametric data in that report were used to plan a single filtration/leaching test using a blend of both wastes. The test focused on filtration testing of the waste and caustic leaching for aluminum, in the form of gibbsite, and its impact on filtration. The initial sample was diluted with a liquid simulant to simulate the receiving concentration of retrieved tank waste into the UFP2 vessel (
Download or read book Remediation of Legacy Hazardous and Nuclear Industrial Sites written by Stuart T. Arm and published by CRC Press. This book was released on 2024-09-12 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remediation of Legacy Hazardous and Nuclear Industrial Sites provides an overview of the key elements involved in remediating complex waste sites using the Hanford nuclear site as a case study. Hanford is one of the most complex waste sites in the world and has examples of most, if not all, characteristics of the complex waste sites that exist globally. This book is aimed at a non-technical audience and describes the stages of remediation based on general RCRA/CERCLA processes, from establishing a strategy that includes all stakeholders to site assessment, waste treatment and disposal, and long-term monitoring. Features: Informs a non-technical audience of the important elements involved in complex waste site remediation Employs the Hanford Site as a case study throughout to explain real-world applications of remediation steps Connects the “human” element to the technical aspects through interviews with key current and retired individuals at the Hanford Site Includes discussion of stakeholders and the engagement process in remediation Demonstrates how all elements of complex waste site remediation from demolition of buildings to groundwater management are interrelated Focuses on broader technical and sociopolitical challenges for remediation of a contaminated site Aimed at a broad audience, this book offers approachable guidance to technical and non-technical readers through a series of real-world examples that cover each important step in the complex waste cleanup process.
Download or read book Characterization Leaching and Filtrations Testing of Ferrocyanide Tank Sludge Group 8 Actual Waste Composite written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final report in a series of eight reports defining characterization, leach, and filtration testing of a wide variety of Hanford tank waste sludges. The information generated from this series is intended to supplement the Waste Treatment and Immobilization Plant (WTP) project understanding of actual waste behaviors associated with tank waste sludge processing through the pretreatment portion of the WTP. The work described in this report presents information on a high-iron waste form, specifically the ferrocyanide tank waste sludge. Iron hydroxide has been shown to pose technical challenges during filtration processing; the ferrocyanide tank waste sludge represented a good source of the high-iron matrix to test the filtration processing.
Download or read book Science and Technology for Disposal of Radioactive Tank Wastes written by Wallace W. Shulz and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive wastes resulting from over 40 years of production of nuclear weapons in the U. S. are currently stored in 273 underground tanks at the U. S. Department of Energy Hanford site, Idaho National Engineering and Environmental Laboratory, Oak Ridge Reservation, and Savannah River site. Combined, tanks at these sjtes contain approximately 94,000,000 gallons of waste in a variety of forms including liquid, concrete-like salt cake, and various sludges. More than 730,000,000 curies of several radioactive isotopes are present in the underground tanks. Certainly, one of the greatest challenges facing the U. S. Department of Energy is how to characterize, retrieve, treat, and immobilize the great variety of tank wastes in a safe, timely, and cost-effective manner. For several years now, the U. S. Department of Energy has initiated and sponsored scientific and engineering studies, tests, and demonstrations to develop the myriad of technologies required to dispose of the radioactive tank wastes. In recent times, much of the Department of Energy R&D activities concerning tank wastes have been closely coordinated and organized through the Tanks Focus Area (IF A); responsibility for technical operations of the TF A has been assigned to the Pacific Northwest National Laboratory.
Download or read book Guide to the Disposal of Chemically Stabilized and Solidified Wastes written by and published by . This book was released on 1980 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Technology written by Goddard Space Flight Center and published by . This book was released on 1990 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science of Clays written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a comprehensive and coherent description of three widely separated aspects of clays: the science of clays; the industrial uses of clays; and the role of clays in the environment. Most of the existing literature lacks such an integrated study and this work endeavours to fill that gap. An exhaustive account of the science of clays is presented in Part I of the book, which includes the classification, origin and evolution, composition and internal structure, chemical and physical properties of clays; soil mechanics; and analytical techniques for determining clay constituents. Part II provides a comprehensive description of the applications of clays and their derivatives in various industries, while Part III describes the role of clays in the environment; the pollution caused by clay minerals; and the application of clays in order to prevent environmental hazards. A principal feature of the book is its explanation of how the structure and composition of particular clay types facilitate their specific industrial or environmental applications, thus describing the interrelationship between three widely varying aspects of clay. A number of thought-provoking questions are raised at the end of the work in order to leave readers with a better insight in this regard.
Download or read book Water Reuse written by Chris Binnie and published by IWA Publishing. This book was released on 2008-05-14 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Reuse: An International Survey of current practice, issues and needs examines water reuse practices around the world from different perspectives. The objective is to show how differently wastewater reuse is conceived and practised around the world as well as to present the varied needs and possibilities for reusing wastewater. In the first section water reuse practices around the world are described for regions having common water availability, reuse needs and social aspects. The second section refers to the “stakeholders” point of view. Each reuse purpose demands different water quality, not only to protect health and the environment but also to fulfil the requirements of the specific reuse. Reuses considered are agricultural, urban agriculture as a special case of the former, municipal and industrial. Alongside these uses, the indirect reuse for human consumption through aquifer recharge is also discussed. The third section deals with emerging and controversial topics. Ethical and economical dilemmas in the field are presented as a subject not frequently addressed in this field. The role of governments in respect of public policy in reuse is discussed as well as the different international criteria and standards for reusing wastewater. The importance of public acceptance and the way to properly handle it is also considered. The fourth section of the book presents contrasting case studies; typical situations in the developed world (Japan and Germany) are compared to those in developing countries (Pakistan and Brazil) for agricultural and industrial reuse. Indirect planned reuse for human consumption (Germany) is compared with an unplanned one (Mexico). The Windhoek, Namibia case study is presented to emphasize why if the direct reuse of wastewater for human consumption has been performed with success for more than 35 years it is still the only example of this type around the world. To illustrate the difficulties of having a common framework for regulating water reuse in several countries, the Mediterranean situation is described. Other case studies presented refer to the reuse situation in Israel, Spain, Cameroon, Nepal and Vietnam, these latter countries being located in water rich areas. This book will be an invaluable information source for all those concerned with water reuse including water utility managers, wastewater policy makers and water resources planners as well as researchers and students in environmental engineering, water resources planning and sanitary engineering. Scientific and Technical Report No. 20
Download or read book Environmental Engineering Dictionary and Directory written by Thomas M. Pankratz and published by CRC Press. This book was released on 2000-09-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like most technical disciplines, environmental science and engineering is becoming increasingly specialized. As industry professionals focus on specific environmental subjects they become less familiar with environmental problems and solutions outside their area of expertise. This situation is compounded by the fact that many environmental science
Download or read book Molten Salt Technology written by David G. Lovering and published by Springer. This book was released on 2014-11-14 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of the Performance of Engineered Waste Containment Barriers written by National Research Council and published by National Academies Press. This book was released on 2007-09-22 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: President Carter's 1980 declaration of a state of emergency at Love Canal, New York, recognized that residents' health had been affected by nearby chemical waste sites. The Resource Conservation and Recovery Act, enacted in 1976, ushered in a new era of waste management disposal designed to protect the public from harm. It required that modern waste containment systems use "engineered" barriers designed to isolate hazardous and toxic wastes and prevent them from seeping into the environment. These containment systems are now employed at thousands of waste sites around the United States, and their effectiveness must be continually monitored. Assessment of the Performance of Engineered Waste Containment Barriers assesses the performance of waste containment barriers to date. Existing data suggest that waste containment systems with liners and covers, when constructed and maintained in accordance with current regulations, are performing well thus far. However, they have not been in existence long enough to assess long-term (postclosure) performance, which may extend for hundreds of years. The book makes recommendations on how to improve future assessments and increase confidence in predictions of barrier system performance which will be of interest to policy makers, environmental interest groups, industrial waste producers, and industrial waste management industry.
Download or read book A Dictionary of Chemical Engineering written by Carl Schaschke and published by OUP Oxford. This book was released on 2014-01-09 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Dictionary of Chemical Engineering is one of the latest additions to the market leading Oxford Paperback Reference series. In over 3,400 concise and authoritative A to Z entries, it provides definitions and explanations for chemical engineering terms in areas including: materials, energy balances, reactions, separations, sustainability, safety, and ethics. Naturally, the dictionary also covers many pertinent terms from the fields of chemistry, physics, biology, and mathematics. Useful entry-level web links are listed and regularly updated on a dedicated companion website to expand the coverage of the dictionary. Comprehensively cross-referenced and complemented by over 60 line drawings, this excellent new volume is the most authoritative dictionary of its kind. It is an essential reference source for students of chemical engineering, for professionals in this field (as well as related disciplines such as applied chemistry, chemical technology, and process engineering), and for anyone with an interest in the subject.
Download or read book Small scale Freshwater Toxicity Investigations written by Christian Blaise and published by Springer Science & Business Media. This book was released on 2005-10-24 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad review is the first to gather comprehensive information on the complete contemporary range of toxicity testing procedures and hazard assessment procedures, which is normally scattered and difficult to find. The two-volume set provides a consistent, template-based approach, linking relevant information on background, theory and practice to each bioassay. Volume 2 examines hazard assessment schemes. Includes extensive glossary.
