Download or read book Characteristics of Fluidized Beds from the Analysis of Pressure Drop Fluctuations written by Ramanujam Srinivasan and published by . This book was released on 1977 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Dynamics of Turbulent Fluidized Beds for Geldart s Group B Particles written by Tom Wytrwat and published by Cuvillier Verlag. This book was released on 2022-02-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth experimental study of the fluid dynamics of turbulent fluidized beds with particles of Geldart’s Group B was carried out. For this purpose, fluidization behavior was investigated in different fluidized bed plants having diameters in the range of 0.05 m to 1 m. Pressure fluctuation analysis has been used as an identification tool for the turbulent fluidized bed regime. Different fluidization conditions have been investigated by variation of the fluidized bed properties, the bed material properties, and the gas properties. Based on the measured data, a correlation predicting the transition velocity from bubbling to turbulent fluidization is introduced. To investigate the local flow structure, capacitance probe measurements have been carried out. Using this measurement technique, local solids concentrations and properties of rising bubbles have been determined and analyzed. Finally, an empiric fluid dynamic model was developed using the local measurement data. It is mainly based on capacitance probe measurements and shows high accuracy in comparison to pressure data.
Download or read book A Study of Properties of Fluidized Beds written by Robert John Fiocco and published by . This book was released on 1964 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Particle Size on the Properties of Gas fluidized Beds written by K. S. Sutherland and published by . This book was released on 1964 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of a continuous method for determining changes in particle size and particle size distribution in fluid-bed systems has been studied experimentally. Differential pressure measurements were employed to study the effects of solid particle size on the behavior of gas-fluidized beds. The relevant bed properties are briefly described and a review given of previous work on the study of fluidized-bed quality. It is shown that, within certain limitations, measurements of bed quality can be used to indicate changes in particle size. Gas-bubble velocities, while increasing in proportion to the square root of bubble diameter, are also shown to be dependent on particle size, increasing as the particle size decreases.
Download or read book Pressure drop Characteristics of Pulsating Fluidized Beds written by Theunis C. Erasmus and published by . This book was released on 1965 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluidized Bed Reactors Processes and Operating Conditions written by John G. Yates and published by Springer. This book was released on 2016-09-27 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluidized-bed reactor is the centerpiece of industrial fluidization processes. This book focuses on the design and operation of fluidized beds in many different industrial processes, emphasizing the rationale for choosing fluidized beds for each particular process. The book starts with a brief history of fluidization from its inception in the 1940’s. The authors present both the fluid dynamics of gas-solid fluidized beds and the extensive experimental studies of operating systems and they set them in the context of operating processes that use fluid-bed reactors. Chemical engineering students and postdocs as well as practicing engineers will find great interest in this book.
Download or read book Fluidization Engineering written by D. Kunii and published by Elsevier. This book was released on 2013-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidization Engineering, Second Edition, expands on its original scope to encompass these new areas and introduces reactor models specifically for these contacting regimes. Completely revised and updated, it is essentially a new book. Its aim is to distill from the thousands of studies those particular developments that are pertinent for the engineer concerned with predictive methods, for the designer, and for the user and potential user of fluidized beds. - Covers the recent advances in the field of fluidization. - Presents the studies of developments necessary to the engineers, designers, and users of fluidized beds.
Download or read book Essentials of Fluidization Technology written by John R. Grace and published by John Wiley & Sons. This book was released on 2020-06-15 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and clear treatment of the fundamentals of fluidization, with a view to its applications in the process and energy industries.
Download or read book Fluid Dynamics of Turbulent Fluidized Beds for Geldart s Group B Particles written by Tom Wytrwat and published by SPE-Schriftenreihe 20. This book was released on 2022-02-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth experimental study of the fluid dynamics of turbulent fluidized beds with particles of Geldart's Group B was carried out. For this purpose, fluidization behavior was investigated in different fluidized bed plants having diameters in the range of 0.05 m to 1 m. Pressure fluctuation analysis has been used as an identification tool for the turbulent fluidized bed regime. Different fluidization conditions have been investigated by variation of the fluidized bed properties, the bed material properties, and the gas properties. Based on the measured data, a correlation predicting the transition velocity from bubbling to turbulent fluidization is introduced. To investigate the local flow structure, capacitance probe measurements have been carried out. Using this measurement technique, local solids concentrations and properties of rising bubbles have been determined and analyzed. Finally, an empiric fluid dynamic model was developed using the local measurement data. It is mainly based on capacitance probe measurements and shows high accuracy in comparison to pressure data.
Download or read book Multiphase Flow and Fluidization written by Dimitri Gidaspow and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and introducing the new dependent variable--the volume fraction of the dispersed phase. Exercises at the end of each chapterare provided for further study and lead into applications not covered in the text itself. - Treats fluidization as a branch of transport phenomena - Demonstrates how to do transient, multidimensional simulation of multiphase processes - The first book to apply kinetic theory to flow of particulates - Is the only book to discuss numerical stability of multiphase equations and whether or not such equations are well-posed - Explains the origin of bubbles and the concept of critical granular flow - Presents clearly written exercises at the end of each chapter to facilitate understanding and further study
Download or read book Frequency Analysis of Pressure Fluctuations in Bubbling Fluidized Beds and Its Application to Similitude Studies written by Ramón G. De la Cruz Báez and published by . This book was released on 1994 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Fluctuations as a Diagnostic Tool for Fluidized Beds Technical Progress Report July 1 1995 September 30 1995 written by and published by . This book was released on 1996 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive experimentation has been conducted to determine whether circulating fluidized bed (CFB) pressure fluctuations can be used to verify that similitude conditions in circulating fluidized beds have been achieved. Using two geometrically similar CFB models, pressure fluctuations were recorded while the full set of similitude parameters were matched under a broad range of operating conditions. The method of data acquisition and analysis is shown to be very important in order to observe the significant frequency phenomena. Under relatively dilute conditions similar power spectral density and Bode plot profiles are observed in the two geometrically similar beds. The dominant frequency under these dilute conditions is inversely proportional to the characteristic CFB dimension. Under conditions of higher solids loading, an additional lower bed frequency phenomena is observed in the spectrum which may be a function of the depth of the lower dense bed in the CFB. It is evident from the results that under some operating conditions, a single dimensionless frequency is not sufficient to validate the achievement of similitude using pressure fluctuations. The results also suggest that the use of similitude parameters as they are currently defined is limited to dilute operating conditions, prior to the formation of a lower dense CFB.
Download or read book Fast Fluidization written by and published by Academic Press. This book was released on 1994-12-23 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, circulating fluidization or fast fluidization has developed rapidly, superseding standard bubbling fluidization in many applications; for example, fast fluidization provides a better means forcontrolling emissions from the combustion of high-sulfur fuels and excels when used in boilers in steam plant and power stations. China initiated the study of fast fluidization in the early 1970s. Focusing on the substantial research cultivated in that country, with Kwauk at the leading edge, this latest volume in the Advances in Chemical Engineering Series is written in the context of the international state of the art and addresses some of the most vital issues surrounding this fluidization method."
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Modern Drying Technology Volume 2 written by Evangelos Tsotsas and published by John Wiley & Sons. This book was released on 2011-02-10 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume handbook provides a comprehensive overview of all important aspects of modern drying technology, including only cutting-edge results. Volume 2 comprises experimental methods used in various industries and in research in order to design and control drying processes, measure moisture and moisture distributions, characterize particulate material and the internal micro-structure of dried products, and investigate the behavior of particle systems in drying equipment. Key topics include acoustic levitation, near-infrared spectral imaging, magnetic resonance imaging, X-ray tomography, and positron emission tracking.
Download or read book Statistical Analysis of Pressure Fluctuations in a High Pressure Gas solid Fluidized Bed written by Mark Owen Dailey and published by . This book was released on 1984 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Fluidization and Fluid Particle Systems written by Wen-Ching Yang and published by CRC Press. This book was released on 2003-03-19 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference details particle characterization, dynamics, manufacturing, handling, and processing for the employment of multiphase reactors, as well as procedures in reactor scale-up and design for applications in the chemical, mineral, petroleum, power, cement and pharmaceuticals industries. The authors discuss flow through fixed beds, elutriation and entrainment, gas distributor and plenum design in fluidized beds, effect of internal tubes and baffles, general approaches to reactor design, applications for gasifiers and combustors, dilute phase pneumatic conveying, and applications for chemical production and processing. This is a valuable guide for chemists and engineers to use in their day-to-day work.
