Download or read book Characterisation of Areal Surface Texture written by Richard Leach and published by Springer Science & Business Media. This book was released on 2013-04-03 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The function of a component part can be profoundly affected by its surface topography. There are many examples in nature of surfaces that have a well-controlled topography to affect their function. Examples include the hydrophobic effect of the lotus leaf, the reduction of fluid drag due to the riblet structure of shark skin, the directional adhesion of the gecko foot and the angular sensitivity of the multi-faceted fly eye. Surface structuring is also being used extensively in modern manufacturing. In this way many properties can be altered, for example optical, tribological, biological and fluidic. Previously, single line (profile) measurements were adequate to control manufacture of surfaces, but as the need to control the functionality of surfaces increases, there is a growing need for three-dimensional (areal) measurement and characterisation techniques. For this reason there has been considerable research, development and standardisation of areal techniques. This book will present the areal framework that is being adopted by the international community. Whereas previous books have concentrated on the measurement aspects, this book concentrates on the characterisation techniques, i.e. how to interpret the measurement data to give the appropriate (functional) information for a given task. The first part of the book presents the characterisation methods and the second part case studies that highlight the use of areal methods in a broad range of subject areas - from automobile manufacture to archaeology. Contents Introduction to Surface Topography The Areal Field Parameters The Areal Feature Parameters Areal Filtering Methods Areal Form Removal Areal Fractal Methods Choosing the Appropriate Parameter Characterisation of Individual Areal Features Multi-Scale Signature of Surface Topography Correlation of Areal Surface Texture Parameters to Solar Cell Efficiency Characterisation of Cylinder Liner Honing Textures for Production Control Characterisation of the Mechanical Bond Strength for Copper on Glass Plating Applications Inspection of Laser Structured Cams and Conrods Road Surfaces

Download or read book Optical Measurement of Surface Topography written by Richard Leach and published by Springer Science & Business Media. This book was released on 2011-03-31 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The measurement and characterisation of surface topography is crucial to modern manufacturing industry. The control of areal surface structure allows a manufacturer to radically alter the functionality of a part. Examples include structuring to effect fluidics, optics, tribology, aerodynamics and biology. To control such manufacturing methods requires measurement strategies. There is now a large range of new optical techniques on the market, or being developed in academia, that can measure areal surface topography. Each method has its strong points and limitations. The book starts with introductory chapters on optical instruments, their common language, generic features and limitations, and their calibration. Each type of modern optical instrument is described (in a common format) by an expert in the field. The book is intended for both industrial and academic scientists and engineers, and will be useful for undergraduate and postgraduate studies.

Download or read book Characterisation of Areal Surface Texture written by Richard Leach and published by Springer Nature. This book was released on with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Techniques for Assessment Surface Topography written by Liam Blunt and published by Elsevier. This book was released on 2003-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication deals with the latest developments in the field of 3D surface metrology and will become a seminal text in this important area. It has been prepared with the support of the European Community's Directorate General XII and represents the culmination of research conducted by 11 international partners as part of an EU-funded project. The aim of the project is to inform standards bodies of the possibilities that exist for a new international standard covering the field of 3D surface characterisation.The book covers a description of the proposed 3D surface parameters and advanced filtering techniques using wavelet and robust Gaussian methodologies. The next generation areal surface characterisation theories are discussed and their practical implementation is illustrated. It describes techniques for calibration of 3D instrumentation, including stylus instruments as well as scanning probe instrumentation. Practical verification of the 3D parameters and the filtering is illustrated through a series of case studies which cover bio-implant surfaces, automotive cylinder liner and steel sheet. Finally, future developments of the subject are alluded to and implications for future standardisation and development are discussed.

Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide

Download or read book Surfaces and their Measurement written by David J. Whitehouse and published by Elsevier. This book was released on 2004-07-01 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of surface metrology has long been acknowledged in manufacturing and mechanical engineering, but has now gained growing recognition in an expanding number of new applications in fields such as semiconductors, electronics and optics. Metrology is the scientific study of measurement, and surface metrology is the study of the measurement of rough surfaces. In this book, Professor David Whitehouse, an internationally acknowledged subject expert, covers the wide range of theory and practice, including the use of new methods of instrumentation. · Written by one of the world's leading metrologists · Covers electronics and optics applications as well as mechanical · Written for mechanical and manufacturing engineers, tribologists and precision engineers in industry and academia

Download or read book Three Dimensional Surface Topography written by Ken J Stout and published by Elsevier. This book was released on 2000-06-01 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully illustrated text explains the basic measurement techniques, describes the commercially available instruments and provides an overview of the current perception of 3-D topography analysis in the academic world and industry, and the commonly used 3-D parameters and plots for the characterizing and visualizing 3-D surface topography. It also includes new sections providing full treatment of surface characterization, filtering technology and engineered surfaces, as well as a fully updated bibliography.

Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.

Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.

Download or read book Engineering Tribology written by Gwidon Stachowiak and published by Elsevier. This book was released on 2011-03-31 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering applications of tribology.This book offers an extensive range if illustrations which communicate the basic concepts of tribology in engineering better than text alone. All chapters include an extensive list of references and citations to facilitate further in-depth research and thorough navigation through particular subjects covered in each chapter. - Includes newly devised end-of-chapter problems - Provides a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid non-specialists - Gives a reader-friendly approach to the subject using a graphic illustrative method to break down the typically complex problems associated with tribology

Download or read book Advanced Metrology written by X. Jane Jiang and published by Academic Press. This book was released on 2020-04-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Metrology: Freeform Surfaces provides the perfect guide for engineering designers and manufacturers interested in exploring the benefits of this technology. The inclusion of industrial case studies and examples will help readers to implement these techniques which are being developed across different industries as they offer improvements to the functional performance of products and reduce weight and cost. - Includes case studies in every chapter to help readers implement the techniques discussed - Provides unique advice from industry on hot subjects, including surface description and data processing - Features links to online content, including video, code and software

Download or read book TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2020-02-13 with total page 2046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Download or read book Precision Metal Additive Manufacturing written by Richard Leach and published by CRC Press. This book was released on 2020-09-21 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is a fast-growing sector with the ability to evoke a revolution in manufacturing due to its almost unlimited design freedom and its capability to produce personalised parts locally and with efficient material use. AM companies, however, still face technological challenges such as limited precision due to shrinkage, built-in stresses and limited process stability and robustness. Moreover, often post-processing is needed due to high roughness and remaining porosity. Qualified, trained personnel are also in short supply. In recent years, there have been dramatic improvements in AM design methods, process control, post-processing, material properties and material range. However, if AM is going to gain a significant market share, it must be developed into a true precision manufacturing method. The production of precision parts relies on three principles: Production is robust (i.e. all sensitive parameters can be controlled). Production is predictable (for example, the shrinkage that occurs is acceptable because it can be predicted and compensated in the design). Parts are measurable (as without metrology, accuracy, repeatability and quality assurance cannot be known). AM of metals is inherently a high-energy process with many sensitive and inter-related process parameters, making it susceptible to thermal distortions, defects and process drift. The complete modelling of these processes is beyond current computational power, and novel methods are needed to practicably predict performance and inform design. In addition, metal AM produces highly textured surfaces and complex surface features that stretch the limits of contemporary metrology. With so many factors to consider, there is a significant shortage of background material on how to inject precision into AM processes. Shortage in such material is an important barrier for a wider uptake of advanced manufacturing technologies, and a comprehensive book is thus needed. This book aims to inform the reader how to improve the precision of metal AM processes by tackling the three principles of robustness, predictability and metrology, and by developing computer-aided engineering methods that empower rather than limit AM design. Richard Leach is a professor in metrology at the University of Nottingham and heads up the Manufacturing Metrology Team. Prior to this position, he was at the National Physical Laboratory from 1990 to 2014. His primary love is instrument building, from concept to final installation, and his current interests are the dimensional measurement of precision and additive manufactured structures. His research themes include the measurement of surface topography, the development of methods for measuring 3D structures, the development of methods for controlling large surfaces to high resolution in industrial applications and the traceability of X-ray computed tomography. He is a leader of several professional societies and a visiting professor at Loughborough University and the Harbin Institute of Technology. Simone Carmignato is a professor in manufacturing engineering at the University of Padua. His main research activities are in the areas of precision manufacturing, dimensional metrology and industrial computed tomography. He is the author of books and hundreds of scientific papers, and he is an active member of leading technical and scientific societies. He has been chairman, organiser and keynote speaker for several international conferences, and received national and international awards, including the Taylor Medal from CIRP, the International Academy for Production Engineering.

Download or read book Micro and Precision Manufacturing written by Kapil Gupta and published by Springer. This book was released on 2017-10-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details on various micro and precision manufacturing and finishing operations performed by conventional and advanced processes, including micro-manufacturing of micro-tools and precision finishing of engineered components. It describes the process mechanism, principles and parameters while performing micro-fabrication and precision finishing operations. The text provides the readers with knowledge of micro and precision manufacturing and encourages them to explore the future venues in this field.

Download or read book Innovative Developments in Virtual and Physical Prototyping written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2011-09-16 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Developments in Virtual and Physical Prototyping presents essential research in the area of Virtual and Rapid Prototyping. The volume contains reviewed papers presented at the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, hosted by the Centre for Rapid and Sustainable Product Development of the Polytechnic Institute of Leiria, Portugal, from September 28 to October 1, 2011. A wide range of topics is covered, such as CAD and 3D Data Acquisition Technologies, Additive and Nano Manufacturing Technologies, Rapid Tooling & Manufacturing, Biomanufacturing, Materials for Advanced Manufacturing Processes, Virtual Environments and Simulation, Applications of Virtual and Physical Prototyping Technologies. Innovative Developments in Virtual and Physical Prototyping is intended for engineers, designers and manufacturers who are active in the areas of mechanical, industrial and biomedical engineering.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.