Download or read book High Performance Polymers Polyimides Based written by Marc Abadie and published by BoD – Books on Demand. This book was released on 2012-12-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The feature of polyimides and other heterocyclic polymers are now well-established and used for long term temperature durability in the range of 250 - 350'C. This book will review synthesis, mechanisms, ultimate properties, physico-chemical properties, processing and applications of such high performance materials needed in advanced technologies. It presents interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research. The volume contains eleven chapters divided into three sections: Chemistry; Chemical and Physical Properties; and Applications.

Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.

Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.

Download or read book Polymers for the Medical Industry written by and published by iSmithers Rapra Publishing. This book was released on 2001-12-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Book of Abstracts written by and published by . This book was released on 2000 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Based Additive Manufacturing written by Jonathan E. Seppala and published by . This book was released on 2020-08-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Additive manufacturing (AM) is a potentially disruptive technology, revolutionizing not only traditional industries but generating entirely new ones through rapid innovation, the democratization of manufacturing, and unprecedented freedom of design. Furthermore, the development of AM technologies has practical implications for economic growth, healthcare, national security, space exploration, and sustainability. For military and space agencies, AM offers the possibility to transform the traditional supply chain system through manufacturing at-point-of-demand, recycling, and indigenous sourcing of raw materials. Similarly, these concepts are being leveraged by remote communities across the globe through efforts such as Fab Labs, which provide low-cost access to manufacturing technologies. AM is transforming healthcare in unexpected ways: doctors and patients have access to high-quality physical 3D models generated directly from computerized tomography (CT) scans. These surgical guides have proved invaluable in surgical preparation and patient consent. In the lab, researchers are developing medical devices or implants which mimic the patient's physiology, are pre-loaded with therapeutics, and are replaced with the patient's cells through natural tissue repair pathways. Pushing the limits of resolution, multi-photon technologies, which allow subdiffraction-limited resolution, are revolutionizing the development of micro-optical components. Unfortunately, adoption of AM technologies by industry has been slow; and while there are numerous success stories and commercial adoption is steadily increasing, AM is hampered by weak parts, incomplete certification methods, and empirical materials development. Regulatory and standards bodies are working to update or develop new standards and policies to deal with the unique material and production issues posed by AM. Many of the challenges facing the industry stem from our limited understanding of structure-process-performance relationships. These challenges fall into many categories and require a broad range of skills to address. For the researcher, AM processes offer unique challenges in materials development, metrology, and modeling, as well as opportunities to combine all three. What makes a polymer printable? What process parameters are important? How should parts be tested? These are all active areas of investigation. This book was inspired by the 2017 ACS Symposium "Additive Manufacturing of Structures and Functional Devices: Materials, Methods, Models, and Testing" and is supplemented by additional experts in the polymer AM field. The chapters discuss the technologies, measurement challenges, manufacturing opportunities, and fabrication potentials. We begin with an introduction to polymer additive manufacturing, identifying the measurement needs and technical challenges facing the industry. A chapter reviewing polymer powder bed fusion follows, providing a complete discussion on methods, materials, and applications. The bulk of the book covers thermoplastic material extrusion, with chapters discussing recycling-based feedstocks, composites materials, and multi-physics modeling linking experimentation and theory. Moving from thermoplastics to conductive inks, a chapter on in situ monitoring and control of direct-ink-write provides a clear example of how theory and modern machine vision can be used to create a practical and responsive control system. The last chapter provides a state-of-the-art review of multi-photon printing, discussing methods, materials, and the stunning capabilities of the technique"--

Download or read book NMR Spectroscopy of Polymers written by H.N. Cheng and published by OUP USA. This book was released on 2012-04-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes review and papers on the latest advances by acknowledged leaders and active researchers in nuclear magnetic resonance (NMR) spectroscopy

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995-04 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.

Download or read book Properties of Polymers written by D.W. van Krevelen and published by Elsevier. This book was released on 2012-12-02 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.

Download or read book Polymer Characterization written by Nicholas P. Cheremisinoff and published by Univ. Press of Mississippi. This book was released on 1996-12-31 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of polymer characterization test methods. The methods and instrumentation described represent modern analytical techniques useful to researchers, product development specialists, and quality control experts in polymer synthesis and manufacturing. Engineers, polymer scientists and technicians will find this volume useful in selecting approaches and techniques applicable to characterizing molecular, compositional, rheological, and thermodynamic properties of elastomers and plastics.

Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Fatigue and Tribological Properties of Plastics and Elastomers written by Laurence W. McKeen and published by Butterworth-Heinemann. This book was released on 2009-11-17 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of a series of core databooks within the William Andrew Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering fatigue and tribology.The concept of fatigue is very straightforward: if an object is subjected to a stress or deformation, and it is repeated, the object becomes weaker. This weakening of plastic material is called fatigue. Tribology is the science and technology of surfaces in contact with each other and therefore covers friction, lubrication and wear. The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues for engineers and scientists involved in the plastics industry and product design with plastics.Fatigue and Tribological Properties of Plastics and Elastomers, Second Edition is an update of all that has changed in the world of plastics since the 1st edition appeared nearly 15 years ago, and has been reorganized from a polymer chemistry point of view. - A hard-working reference tool: part of the daily workflow of engineers and scientists involved in the plastics industry and product design with plastics - The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues - The data in this book provide engineers with the tools they need to design for low failure rates

Download or read book Polymer Science and Technology written by Robert O. Ebewele and published by CRC Press. This book was released on 2000-03-23 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your search for the perfect polymers textbook ends here - with Polymer Science and Technology. By incorporating an innovative approach and consolidating in one volume the fundamentals currently covered piecemeal in several books, this efficient text simplifies the learning of polymer science. The book is divided into three main sections: po

Download or read book Corrosion of Polymers and Elastomers written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 2006-12-22 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Polymers and Elastomers provides a detailed examination of the corrosive effects of thermoplastic polymers, thermoset polymers, and elastomeric materials. The book is perfectly suited for specialists interested in the corrosion resistance and mechanisms of these materials. Following a general introduction to the composition, properties, and applications of polymers, the book focuses on the effects of chemical corrosion caused by changes in temperature, moisture, and other corrodents. Organized by material type, the chapters cover each material's ability to withstand sun, weather, and ozone as well as its chemical resistance and typical applications. The book also includes compatibility tables for each of the materials and compares the corrosion resistance of selected elastomers.

Download or read book Handbook of Specialty Fluorinated Polymers written by Susanta Banerjee and published by William Andrew. This book was released on 2015-04-24 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers are used in applications demanding service at enhanced temperature while maintaining their structural integrity and have excellent combination of chemical, physical and mechanical properties. Advancements in materials and processing technology mean that a huge amount of research is currently taking place into new, high performance applications for specialty fluorinated polymers. This book is a complete review of the current research in synthesizing new fluorinated high performance polymers and their application in the field of low dielectric constant materials, membrane based separation (gas and liquid) and proton exchange membranes. Special emphasis is given to the preparation of soluble high performance polymers by incorporating fluorine and different structural elements so as to use these classes of polymers in different membrane based applications, including low dielectric constant materials, gas separation, pervaporation, proton exchange membranes in fuel cells, and more. The coverage of processing properties and commercial aspects - as well as a practical assessment of the advantages and disadvantages of specialty fluoropolymers compared to other materials - enables engineers and product designers to apply the latest scientific developments in this area in a practical setting. Thorough coverage of modern applications for specialty fluorinated polymers, including membranes and coatings – giving insight into recent research and the future direction of this technology Brings researchers and engineers up to date with the latest developments in specialty fluoropolymers, to assist in future materials research and part design Includes detailed assessment of the advantages and shortcomings of specialty fluorinated polymers, for ease of comparison with alternative materials